This firmware (based on the UV3RMod that this project forks) turns the UV-3R into a fox.
By default, this firmware will transmit K2GXT (the Rochester Institute of Technology Amateur Radio Club callsign) every ~30 seconds on 146.565 MHz. If you choose to use this firmware for your own purposes, you MUST CHANGE THE CALLSIGN TO YOUR OWN!!! You can do this in firmware/main.c line 78, you also have to change the second argument to the length of your callsign.
The UV button will turn the radio on/off. The VOL button will toggle transmitting. The MENU button will change the output power. The ranges are from ~100mW to ~3W.
This firmware is experimental and is to be run at YOUR OWN RISK.
If you have any questions you can contact me at mjs7769@rit.edu.
Below is the original README file for the UV3RMod Repo.
This file is part of the uv3r firmware/programmer More info at www.liorelazary.com
Created by Lior Elazary (KK6BWA) Copyright (C) 2013
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Firmware and programmer to re-flash the UV3R radio
the firmwere directory is the uv3r firmwere which is work in progress
the programmer directory is an arduino code used to flash the radio