Skip to content

damaki/libkeccak

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

74 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Alire

Libkeccak

This project implements the Keccak family of sponge functions and related constructions using the SPARK 2014 programming language, with static proof of type safety and good performance.

libkeccak supports the following cryptographic permutations:

  • The Keccak-p permutation for state sizes of 25, 50, 100, 200, 400, 800, and 1600 bits (see [1] and [2]).
  • The Gimli permutation [7]
  • The Ascon permutation [8]

libkeccak implements the following generic constructions which can be instantiated using the above permutations and with various parameters:

  • The Sponge construction
  • The Duplex construction
  • The MonkeyDuplex construction
  • The MonkeyWrap construction
  • Hash functions based on the Sponge construction
  • eXtendable Output Functions (XOF) based on the Sponge construction
  • cSHAKE, KMAC, TupleHash, and ParallelHash as specified in NIST SP 800-185 [4]
  • KangarooTwelve as specified by the Keccak team [5]

libkeccak also provides concrete implementations of the above constructions, as specified in [1,4,5,6,7]:

  • Hash functions:
    • SHA-3 (224, 256, 384, and 512 bits)
    • Keccak (224, 256, 384, and 512 bits)
    • Gimli-Hash
    • Ascon-Hash
  • XOFs:
    • SHAKE128 and SHAKE256
    • RawSHAKE128 and RawSHAKE256
    • Ascon-XOF
  • cSHAKE:
    • cSHAKE128 and cSHAKE256
  • KMAC:
    • KMAC128 and KMAC256
  • TupleHash:
    • TupleHash128 and TupleHash256
  • Parallel Hashes:
    • KangarooTwelve
    • MarsupilamiFourteen (256-bit security variant of KangarooTwelve)
    • ParallelHash128 and ParallelHash256
  • Authenticated encryption:
    • Ketje (Jr, Sr, Minor, and Major variants)

Note that the difference between a hash function an a XOF function is that a hash function has a fixed output length (for example, 256 bits), whereas the XOFs have arbitrary output length.

The library's algorithms are implemented using Ada's powerful generics. This allows for extensive customization and re-use of the various algorithms. The generic Sponge, XOF, and Hash packages can be instantiated for other permutation functions (other than just the Keccak permutation). This also permits use of this library based on platforms with hardware accelerated implementations of the Keccak permutation.

Example

Here's an example of calculating the SHA3-256 hash of a byte array (array of type Interfaces.Unsigned_8):

with Keccak.Types;
with SHA3;

function Compute_Hash(Data : in Keccak.Types.Byte_Array)
   return SHA3.SHA3_256.Digest_Type
is
   Ctx    : SHA3.SHA3_256.Context;
   Digest : SHA3.SHA3_256.Digest_Type;

begin
   SHA3.SHA3_256.Init(Ctx);
   SHA3.SHA3_256.Update(Ctx, Data);
   SHA3.SHA3_256.Final(Ctx, Digest);

   return Digest;
end Compute_Hash;

License

Libkeccak is licensed under the 3-clause BSD license.

Building

Libkeccak requires a GNAT compiler that supports the Relaxed_Initialization aspect, such as GNAT FSF 11 or newer.

Assuming you've cloned this repository and have Alire installed, libkeccak can be built with the command:

alr build

libkeccak can be built to use SIMD instructions, if your platform supports them, by setting the following GPR variables:

Variable Values Default
LIBKECCAK_ARCH generic, x86_64 generic
LIBKECCAK_SIMD none, SSE2, AVX2 none

⚠️ SSE2 and AVX2 are only available on x86_64 architectures.

Enabling SSE2 will use SSE2 instructions to speed up parallel algorithms such as KangarooTwelve and ParallelHash. Using LIBKECCAK_SIMD=AVX2 will enable the AVX2 instruction set in addition to SSE2. To disable SSE2 and AVX2 on x86_64, set LIBKECCAK_SIMD=none.

⚠️ AVX2 is not guaranteed to work on Windows since GCC does not ensure 32-byte stack alignment. See GCC Bug #54412

Example:

alr build -- -XLIBKECCAK_ARCH=x86_64 -XLIBKECCAK_SIMD=SSE2

Benchmarks

The following performance measurements were taken on an AMD Ryzen 7 5800X on Windows 10. The code was compiled using gnat 11.2.0-4 with the following configuration:

  • LIBKECCAK_ARCH=x86_64
  • LIBKECCAK_SIMD=AVX2
  • All other settings at their default values.

The measurements shown are the output of the benchmark program.

Message size: 524288 bytes
Performing 200 measurements for each test

Gimli: 379 cycles
Gimli Hash: 24.2 cycles/byte
Ascon (12 rounds): 113 cycles
Ascon (8 rounds): 75 cycles
Ascon (6 rounds): 74 cycles
Ascon-Hash: 17.3 cycles/byte
KangarooTwelve (Absorbing): 1.7 cycles/byte
KangarooTwelve (Squeezing): 2.9 cycles/byte
MarsupilamiFourteen (Absorbing): 2.1 cycles/byte
MarsupilamiFourteen (Squeezing): 3.8 cycles/byte
ParallelHash128 (Absorbing): 2.4 cycles/byte
ParallelHash128 (Squeezing): 4.9 cycles/byte
ParallelHash256 (Absorbing): 2.9 cycles/byte
ParallelHash256 (Squeezing): 6.0 cycles/byte
SHA3-224: 6.0 cycles/byte
SHA3-256: 6.3 cycles/byte
SHA3-384: 8.1 cycles/byte
SHA3-512: 11.5 cycles/byte
Keccak-224: 6.0 cycles/byte
Keccak-256: 6.3 cycles/byte
Keccak-384: 8.2 cycles/byte
Keccak-512: 11.5 cycles/byte
SHAKE128 (Absorbing): 5.2 cycles/byte
SHAKE128 (Squeezing): 4.9 cycles/byte
SHAKE256 (Absorbing): 6.3 cycles/byte
SHAKE256 (Squeezing): 6.0 cycles/byte
RawSHAKE128 (Absorbing): 5.2 cycles/byte
RawSHAKE128 (Squeezing): 4.9 cycles/byte
RawSHAKE256 (Absorbing): 6.3 cycles/byte
RawSHAKE256 (Squeezing): 6.0 cycles/byte
Duplex r1152c448: 949 cycles
Duplex r1088c512: 949 cycles
Duplex r832c768: 911 cycles
Duplex r576c1024: 911 cycles
Keccak-p[1600,24]: 759 cycles
Keccak-p[1600,24]×2: 1063 cycles
Keccak-p[1600,24]×4: 1063 cycles
Keccak-p[1600,24]×8: 2165 cycles
Keccak-p[1600,12]: 379 cycles
Keccak-p[1600,12]×2: 531 cycles
Keccak-p[1600,12]×4: 531 cycles
Keccak-p[1600,12]×8: 1139 cycles
Keccak-p[800,22]: 683 cycles
Keccak-p[400,20]: 683 cycles
Keccak-p[200,18]: 644 cycles
Keccak-p[100,16]: 799 cycles
Keccak-p[50,14]: 759 cycles
Keccak-p[25,12]: 416 cycles
Ketje Jr (AAD): 38.3 cycles/byte
Ketje Jr (Encrypt): 44.3 cycles/byte
Ketje Jr (Decrypt): 44.3 cycles/byte
Ketje Jr (Tag): 44.1 cycles/byte
Ketje Sr (AAD): 21.7 cycles/byte
Ketje Sr (Encrypt): 26.9 cycles/byte
Ketje Sr (Decrypt): 26.9 cycles/byte
Ketje Sr (Tag): 23.2 cycles/byte
Ketje Minor (AAD): 4.9 cycles/byte
Ketje Minor (Encrypt): 8.3 cycles/byte
Ketje Minor (Decrypt): 8.3 cycles/byte
Ketje Minor (Tag): 6.5 cycles/byte
Ketje Major (AAD): 2.7 cycles/byte
Ketje Major (Encrypt): 4.0 cycles/byte
Ketje Major (Decrypt): 4.0 cycles/byte
Ketje Major (Tag): 3.2 cycles/byte

Proofs and Testing

Libkeccak takes a "hybrid verification" approach by combining proof and testing.

The library has an auto-active proof of type safety i.e. that the code is free of various run-time errors such as:

  • use of uninitialised variables;
  • integer overflows;
  • division by zero;
  • value out-of-range;
  • out-of-bounds array accesses;
  • non-terminating loops.

This achieves the silver level of assurance (absence of run-time errors) described in [9].

All checks are fully proved, except for a few initialisation checks which GNATprove's flow analysis cannot automatically verify due to the use of loops to perform the initialisation. These checks are manually reviewed and suppressed using pragma Annotate. It is planned to replace these instances with Relaxed_Initialization in the future to achieve a fully automatic proof.

The proofs do not extend to functional correctness, i.e. the proofs do not show that the SHA-3 implementation produces the correct results. Conventional testing is used to provide assurance of the correctness of the algorithms. The tests consist of Known Answer Tests (KAT) and unit tests.

The KATs comprise the bulk of the tests and provide the assurance that the algorithms are implemented correctly.

The unit tests aim to cover the cases that are not covered by the KATs, such as boundary conditions and testing multi-part hashing operations in various combinations of lengths.

Reproducing the results

Assuming you have Alire >= 1.2.0 installed, then:

Proofs

cd prove
alr exec -- gnatprove -P../libkeccak -XLIBKECCAK_ARCH=generic -XLIBKECCAK_SIMD=none

💡 Change -XLIBKECCAK_ARCH and -XLIBKECCAK_SIMD to run the proofs using different SIMD instruction sets.

A summary of the proof results is stored in obj/<arch>_<simd>/gnatprove.out.

The project file configures the prover limits so that they should give the same results on all machines.

To see only failed proofs, pass --report=fail to gnatprove.

Tests

To run the Known Answer Tests using test vectors:

cd tests/kat
alr build -- -XLIBKECCAK_ARCH=generic -XLIBKECCAK_SIMD=none
./run-all-tests.sh

The test vectors are located in the tests/kat/testvectors/ directory.

To run the unit tests:

cd tests/unit_tests
alr build -- -XLIBKECCAK_ARCH=generic -XLIBKECCAK_SIMD=none
alr run

💡 Change -XLIBKECCAK_ARCH and -XLIBKECCAK_SIMD to run the tests using different SIMD instruction sets.

References