Skip to content
/ ssd1322 Public

Rust embedded-hal driver for SSD1322 OLED displays

Notifications You must be signed in to change notification settings

edarc/ssd1322

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

36 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

SSD1322 OLED display driver

Newhaven OLED display showing Ferris and the Rust logo

Pure Rust driver for the SSD1322 OLED display chip, for use with embedded-hal.

Description

This driver is intended to work on embedded platforms using the embedded-hal trait library. It is no_std, contains no added unsafe, and does not require an allocator. The initial release supports the 4-wire SPI interface.

Because the SSD1322 supports displays as large as 480x128 @ 4bpp, the primary API uses a Region abstraction to allow writing a stream of pixel data from an iterator onto a rectangular sub-region of the display area. This avoids the requirement to buffer the entire display RAM in the host, since such a buffer would consume a colossal (for a μC) 30kiB of RAM.

Missing features:

  • embedded-graphics Drawing support.
  • Parallel interface support.
  • Chip select and bus sharing (assumes /CS is tied low).
  • Text mode and/or fonts.

Acknowledgements

jamwaffles/ssd1306 for internal design inspiration. japaric/embedded-hal for making dealing with embedded hardware easy, safe, and enjoyable.

License

Licensed under either of

at your option.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.

About

Rust embedded-hal driver for SSD1322 OLED displays

Topics

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages