Skip to content

fish 3.6.0 (released January 7, 2023)
Compare
Choose a tag to compare
@faho faho released this 07 Jan 14:43
· 2419 commits to master since this release
3.6.0
This tag was signed with the committer’s verified signature.
zanchey David Adam
GPG key ID: C0B969B2974E888E
Learn about vigilant mode.
af833a7

Notable improvements and fixes

  • By default, Control-R now opens the command history in the pager (#602). This is fully searchable and syntax-highlighted, as an alternative to the incremental search seen in other shells. The new special input function history-pager has been added for custom bindings.
  • Abbrevations are more flexible (#9313, #5003, #2287):
    • They may optionally replace tokens anywhere on the command line, instead of only commands
    • Matching tokens may be described using a regular expression instead of a literal word
    • The replacement text may be produced by a fish function, instead of a literal word
    • They may position the cursor anywhere in the expansion, instead of at the end

For example:

function multicd
    echo cd (string repeat -n (math (string length -- $argv[1]) - 1) ../)
end

abbr --add dotdot --regex '^\.\.+$' --function multicd

This expands .. to cd ../, ... to cd ../../ and .... to cd ../../../ and so on.

Or:

function last_history_item; echo $history[1]; end
abbr -a !! --position anywhere --function last_history_item

which expands !! to the last history item, anywhere on the command line, mimicking other shells’ history expansion.

See the documentation for more.

  • path gained a new mtime subcommand to print the modification time stamp for files. For example, this can be used to handle cache file ages (#9057):
> touch foo
> sleep 10
> path mtime --relative foo
10
  • string gained a new shorten subcommand to shorten strings to a given visible width (#9156):
> string shorten --max 10 "Hello this is a long string"
Hello thi…
  • test (aka [) gained -ot (older than) and -nt (newer than) operators to compare file modification times, and -ef to compare whether the arguments are the same file (#3589).
  • fish will now mark the extent of many errors with a squiggly line, instead of just a caret (^) at the beginning (#9130). For example:
checks/set.fish (line 471): for: a,b: invalid variable name. See `help identifiers`
for a,b in y 1 z 3
    ^~^
  • A new function, fish_delta, shows changes that have been made in fish’s configuration from the defaults (#9255).
  • set --erase can now be used with multiple scopes at once, like set -efglU foo (#7711, #9280).
  • status gained a new subcommand, current-commandline, which retrieves the entirety of the currently-executing command line when called from a function during execution. This allows easier job introspection (#8905, #9296).

Deprecations and removed features

  • The \\x and \\X escape syntax is now equivalent. \\xAB previously behaved the same as \\XAB, except that it would error if the value “AB” was larger than “7f” (127 in decimal, the highest ASCII value) (#9247, #9245, #1352).
  • The fish_git_prompt will now only turn on features if the appropriate variable has been set to a true value (of “1”, “yes” or “true”) instead of just checking if it is defined. This allows specifically turning features off without having to erase variables, such as via universal variables. If you have defined a variable to a different value and expect it to count as true, you need to change it (#9274).
    For example, set -g __fish_git_prompt_show_informative_status 0 previously would have enabled informative status (because any value would have done so), but now it turns it off.
  • Abbreviations are no longer stored in universal variables. Existing universal abbreviations are still imported, but new abbreviations should be added to config.fish.
  • The short option -r for abbreviations has changed from rename to regex, for consistency with string.

Scripting improvements

  • argparse can now be used without option specifications, to allow using --min-args, --max-args or for commands that take no options (but might in future) (#9006):
function my_copy
    argparse --min-args 2 -- $argv
    or return

    cp $argv
end
  • set --show now shows when a variable was inherited from fish’s parent process, which should help with debugging (#9029):
> set --show XDG_DATA_DIRS
$XDG_DATA_DIRS: set in global scope, exported, a path variable with 4 elements
$XDG_DATA_DIRS[1]: |/home/alfa/.local/share/flatpak/exports/share|
$XDG_DATA_DIRS[2]: |/var/lib/flatpak/exports/share|
$XDG_DATA_DIRS[3]: |/usr/local/share|
$XDG_DATA_DIRS[4]: |/usr/share|
$XDG_DATA_DIRS: originally inherited as |/home/alfa/.local/share/flatpak/exports/share:/var/lib/flatpak/exports/share:/usr/local/share/:/usr/share/|
  • The read limit is now restored to the default when fish_read_limit is unset (#9129).
  • math produces an error for division-by-zero, as well as augmenting some errors with their extent (#9190). This changes behavior in some limited cases, such as:
math min 1 / 0, 5

which would previously print “5” (because in floating point division “1 / 0” yields infinite, and 5 is smaller than infinite) but will now return an error.

  • fish_clipboard_copy and fish_clipboard_paste can now be used in pipes (#9271):
git rev-list 3.5.1 | fish_clipboard_copy

fish_clipboard_paste | string join + | math
  • status fish-path returns a fully-normalised path, particularly noticeable on NetBSD (#9085).

Interactive improvements

  • If the terminal definition for TERM can’t be found, fish now tries using the “xterm-256color” and “xterm” definitions before “ansi” and “dumb”. As the majority of terminal emulators in common use are now more or less xterm-compatible (often even explicitly claiming the xterm-256color entry), this should often result in a fully or almost fully usable terminal (#9026).
  • A new variable, fish_cursor_selection_mode, can be used to configure whether the command line selection includes the character under the cursor (inclusive) or not (exclusive). The new default is exclusive; use set fish_cursor_selection_mode inclusive to get the previous behavior back (#7762).
  • fish’s completion pager now fills half the terminal on first tab press instead of only 4 rows, which should make results visible more often and save key presses, without constantly snapping fish to the top of the terminal (#9105, #2698).
  • The complete-and-search binding, used with Shift-Tab by default, selects the first item in the results immediately (#9080).
  • bind output is now syntax-highlighted when used interacively.
  • Alt-H (the default __fish_man_page binding) does a better job of showing the manual page of the command under cursor (#9020).
  • If fish_color_valid_path contains an actual color instead of just modifiers, those will be used for valid paths even if the underlying color isn’t “normal” (#9159).
  • The key combination for the QUIT terminal sequence, often Control-Backslash (\\x1c), can now be sused as a binding (#9234).
  • fish’s vi mode uses normal xterm-style sequences to signal cursor change, instead of using the iTerm’s proprietary escape sequences. This allows for a blinking cursor and makes it work in complicated scenarios with nested terminals. (#3741, #9172)
  • When running fish on a remote system (such as inside SSH or a container), Control-X now copies to the local client system’s clipboard if the terminal supports OSC 52.
  • commandline gained two new options, --selection-start and --selection-end, to set the start/end of the current selection (#9197, #9215).
  • fish’s builtins now handle keyboard interrupts (Control-C) correctly (#9266).

Completions

  • Added completions for:
  • Improvements to many completions, including making cd completion much faster (#9220).
  • Completion of tilde (~) works properly even when the file name contains an escaped character (#9073).
  • fish no longer loads completions if the command is used via a relative path and is not in PATH (#9133).
  • fish no longer completes inside of comments (#9320).

Improved terminal support

  • Opening help on WSL now uses PowerShell to open the browser if available, removing some awkward UNC path errors (#9119).

Other improvements

  • The Web-based configuration tool now works on systems with IPv6 disabled (#3857).
  • Aliases can ignore arguments by ending them with # (#9199).
  • string is now faster when reading large strings from stdin (#9139).
  • string repeat uses less memory and is faster. (#9124)
  • Builtins are much faster when writing to a pipe or file. (#9229).
  • Performance improvements to highlighting (#9180) should make using fish more pleasant on slow systems.
  • On 32-bit systems, globs like \* will no longer fail to return some files, as large file support has been enabled.

Fixed bugs

  • The history search text for a token search is now highlighted correctly if the line contains multiple instances of that text (#9066).
  • process-exit and job-exit events are now generated for all background jobs, including those launched from event handlers (#9096).
  • A crash when completing a token that contained both a potential glob and a quoted variable expansion was fixed (#9137).
  • prompt_pwd no longer accidentally overwrites a global or universal $fish_prompt_pwd_full_dirs when called with the -d or --full-length-dirs option (#9123).
  • A bug which caused fish to freeze or exit after running a command which does not preserve the foreground process group was fixed (#9181).
  • The “Disco” sample prompt no longer prints an error in some working directories (#9164). If you saved this prompt, you should run fish_config prompt save disco again.
  • fish launches external commands via the given path again, rather than always using an absolute path. This behaviour was inadvertently changed in 3.5.0 and is visible, for example, when launching a bash script which checks $0 (#9143).
  • printf no longer tries to interpret the first argument as an option (#9132).
  • Interactive read in scripts will now have the correct keybindings again (#9227).
  • A possible stack overflow when recursively evaluating substitutions has been fixed (#9302).
  • A crash with relative $CDPATH has been fixed (#9407).
  • printf now properly fills extra %d specifiers with 0 even on macOS and BSD (#9321).
  • fish_key_reader now correctly exits when receiving a SIGHUP (like after closing the terminal) (#9309).
  • fish_config theme save now works as documented instead of erroring out (#9088, #9273).
  • fish no longer triggers prompts to install command line tools when first run on macOS (#9343).
  • fish_git_prompt now quietly fails on macOS if the xcrun cache is not yet populated (#6625), working around a potential hang.

For distributors

  • The vendored PCRE2 sources have been removed. It is recommended to declare PCRE2 as a dependency when packaging fish. If the CMake variable FISH_USE_SYSTEM_PCRE2 is false, fish will now download and build PCRE2 from the official repo (#8355, #8363). Note this variable defaults to true if PCRE2 is found installed on the system.

Download links: To download the source code for fish, we suggest the file named "fish-3.6.0.tar.xz". The file downloaded from "Source code (tar.gz)" will not build correctly. The SHA-256 sum of this file is 97044d57773ee7ca15634f693d917ed1c3dc0fa7fde1017f1626d60b83ea6181. A GPG signature from David Adam (key ID 0x7A67D962D88A709A) is available as "fish-3.6.0.tar.xz.asc".

Assets 6