Skip Duplicate Actions

skip-duplicate-actions provides the following features to optimize GitHub Actions:

• Skip duplicate workflow runs after merges, pull requests or similar.
• Skip concurrent or parallel workflow runs for things that you do not want to run twice.
• Skip ignored paths to speedup documentation-changes or similar.
• Skip if paths not changed for something like directory-specific tests.
• Cancel outdated workflow runs after branch-pushes.

All of those features help to save time and costs; especially for long-running workflows. You can choose any subset of those features.

Skip duplicate workflow runs

If you work with feature branches, then you might see lots of duplicate workflow runs. For example, duplicate workflow runs can happen if a workflow run is performed on a feature branch, but then the workflow run is repeated right after merging the feature branch. skip-duplicate-actions allows to prevent such runs.

• Full traceability: After clean merges, you will see a message like Skip execution because the exact same files have been successfully checked in <previous_run_URL>.
• Fully configurable: By default, manual triggers and cron will never be skipped.
• Flexible Git usage: skip-duplicate-actions does not care whether you use fast-forward-merges, rebase-merges or squash-merges. However, if a merge yields a result that is different from the source branch, then the resulting workflow run will not be skipped. This is commonly the case if you merge "outdated branches".

Skip concurrent workflow runs

Sometimes, there are workflows that you do not want to run twice at the same time even if they are triggered twice. Therefore, skip-duplicate-actions provides the following options to skip a workflow run if the same workflow is already running:

• Always skip: This is useful if you have a workflow that you never want to run twice at the same time.
• Only skip same content: For example, this can be useful if a workflow has both a push and a pull_request trigger, or if you push a tag right after pushing a commit. (Deprecated, use same_content_newer instead)
• Only skip newer runs with the same content: If the same workflow is running on the exact same content, skip newer runs of it. same_content_newer ensures that at least one of those workflows will run, while same_content may skip all of them.
• Only skip outdated runs: For example, this can be useful for skip-checks that are not at the beginning of a job.
• Never skip: This disables the concurrent skipping functionality, but still lets you use all other options like duplicate skipping.

Skip ignored paths

In many projects, it is unnecessary to run all tests for documentation-only-changes. Therefore, GitHub provides a paths-ignore feature out of the box. However, GitHub's paths-ignore has some limitations:

• GitHub's paths-ignore fails to look at previous commits. This means that the outcome depends on how often you push changes.
• Consequently, GitHub's paths-ignore does not work for required checks. If you path-ignore a required check, then pull requests will block forever without being mergeable.

To overcome those limitations, skip-duplicate-actions provides a more flexible paths_ignore-feature with an efficient backtracking-algorithm. Instead of stupidly looking at the current commit, paths_ignore will look for successful checks in your commit-history.

You can use the paths_filter option if you need to define multiple paths_ignore patterns in a single workflow.

Skip if paths not changed

In some projects, there are tasks that should be only executed if specific sub-directories were changed. Therefore, GitHub provides a paths feature out of the box. However, GitHub's paths has some limitations:

• GitHub's paths cannot skip individual steps in a workflow.
• GitHub's paths does not work with required checks that you really want to pass successfully.

To overcome those limitations, skip-duplicate-actions provides a more sophisticated paths-feature. Instead of blindly skipping checks, the backtracking-algorithm will only skip something if it can find a suitable check in your commit-history.

You can use the paths_filter option if you need to define multiple paths patterns in a single workflow.

Cancel outdated workflow runs

Typically, workflows should only run for the most recent commit. Therefore, when you push changes to a branch, skip-duplicate-actions can be configured to cancel any previous workflow runs that run against outdated commits.

• Full traceability: If a workflow run is cancelled, then you will see a message like Cancelled <previous_run_URL>.
• Guaranteed execution: The cancellation-algorithm guarantees that a complete check-set will finish no matter what.

Inputs

paths_ignore

A JSON-array with ignored path patterns. See cheat sheet for path-pattern examples. See micromatch for details about supported path-patterns.

Example: '["**/README.md", "**/docs/**"]'

Default: '[]'

paths

A JSON-array with path patterns. If this is non-empty, then skip-duplicate-actions will try to skip commits that did not change any of those paths. It uses the same syntax as paths_ignore.

Example: '["platform-specific/**"]'

Default: '[]'

paths_filter

A YAML-string with named paths_ignore / paths patterns.

Example:

frontend:
  paths_ignore:
    - 'frontend/docs/**'
  paths:
    - 'frontend/**'
backend:
  paths:
    - 'backend/**'
  ### Here you can optionally control/limit backtracking
  # Boolean or number (default: true)
  # 'false' means disable backtracking completely
  # '5' means to stop after having traced back 5 commits
  backtracking: 5

Useful if you have multiple jobs in one workflow and want to skip them based on different paths_ignore / paths patterns. See the corresponding paths_result output and example configuration.

cancel_others

If true, then workflow runs from outdated commits will be cancelled.

Default: 'false'

skip_after_successful_duplicate

If true, skip if an already finished duplicate run can be found.

Default: 'true'

do_not_skip

A JSON-array with triggers that should never be skipped.

Possible values are pull_request, push, workflow_dispatch, schedule, release, merge_group.

Default: '["workflow_dispatch", "schedule", "merge_group"]'

concurrent_skipping

Skip a workflow run if the same workflow is already running.

One of never, same_content, same_content_newer, outdated_runs, always.

Default: 'never'

Outputs

should_skip

Returns 'true' if the current run should be skipped according to your configured rules. This should be evaluated for either individual steps or entire jobs.

reason

The reason why the current run is considered skippable or unskippable. Corresponds approximately to the input options.

Example: skip_after_successful_duplicate

skipped_by

Returns information about the workflow run which caused the current run to be skipped.

Example:

{
  "id": 1709469369,
  "runNumber": 737,
  "event": "pull_request",
  "treeHash": "e3434bb7aeb3047d7df948f09419ac96cf03d73e",
  "commitHash": "4a0432e823468ecff81a978165cb35586544c795",
  "status": "completed",
  "conclusion": "success",
  "htmlUrl": "https://github.com/fkirc/skip-duplicate-actions/actions/runs/1709469369",
  "branch": "master",
  "repo": "fkirc/skip-duplicate-actions",
  "workflowId": 2640563,
  "createdAt": "2022-01-17T18:56:06Z"
}

• Returns information only when current run is considered skippable, otherwise an empty object ({}) is returned.

paths_result

Returns information for each configured filter in paths_filter.

Example:

{
  "frontend": {
    "should_skip": true,
    "backtrack_count": 1,
    "skipped_by": {
      // Information about the workflow run
    },
  "backend": {
    "should_skip": false,
    "backtrack_count": 1,
    "matched_files": ["backend/file.txt"]
  },
  "global": {
    "should_skip": false,
    "backtrack_count": 0
  }
}

• The global key corresponds to the "global" paths_ignore and paths options.
• A list of matched files is returned in matched_files, if there are any.
• The skipped_by return value behaves the same as the "global" skipped_by output.
• The backtrack_count shows how many commits where traced back (skipped) until an appropriate commit has been found.
• If skip-duplicate-actions terminates before the paths checks are performed (for example, when a successful duplicate run has been found) an empty object is returned ({}).

changed_files

A two-dimensional array, with a list of changed files for each commit that has been traced back.

Example: [["some/example/file.txt", "another/example/file.txt"], ["frontend/file.txt"]]

• Having a two-dimensional list makes processing flexible. For example, one can flatten (and uniquify) the list to get changed files from all commits which were traced back. Or one can use changed_files[0] to get changed files from the latest commit. One might also use the output of backtrack_count from paths_result to process the list of changed files.
• Returns information only if one of the options paths_ignore, paths, paths_filter is set.
• If skip-duplicate-actions terminates before the paths checks are performed (for example, when a successful duplicate run has been found) an empty array ([]) is returned.

Usage examples

You can use skip-duplicate-actions to either skip individual steps or entire jobs. To minimize changes to existing jobs, it is often easier to skip entire jobs.

Note

• You may need to use fromJSON to access properties of object outputs. For example, for skipped_by.id, you can use the expression: ${{ fromJSON(steps.skip_check.outputs.skipped_by).id }}.

• For GitHub repositories where default permissions for GITHUB_TOKEN has been set to "permissive (read-only)", the following lines must be included in the workflow (see permissions syntax):

  # Minimum permissions required by skip-duplicate-actions
  permissions:
    actions: write
    contents: read

Example 1: Skip entire jobs

To skip entire jobs, you should add a pre_job that acts as a pre-condition for your main_job. Although this example looks like a lot of code, there are only two additional lines in your project-specific main_job (the needs-clause and the if-clause):

jobs:
  pre_job:
    # continue-on-error: true # Uncomment once integration is finished
    runs-on: ubuntu-latest
    # Map a step output to a job output
    outputs:
      should_skip: ${{ steps.skip_check.outputs.should_skip }}
    steps:
      - id: skip_check
        uses: fkirc/skip-duplicate-actions@v5
        with:
          # All of these options are optional, so you can remove them if you are happy with the defaults
          concurrent_skipping: 'never'
          skip_after_successful_duplicate: 'true'
          paths_ignore: '["**/README.md", "**/docs/**"]'
          do_not_skip: '["pull_request", "workflow_dispatch", "schedule"]'

  main_job:
    needs: pre_job
    if: needs.pre_job.outputs.should_skip != 'true'
    runs-on: ubuntu-latest
    steps:
      - run: echo "Running slow tests..." && sleep 30

Example 2: Skip individual steps

The following example demonstrates how to skip an individual step with an if-clause and an id. In this example, the step will be skipped if no files in src/ or dist/ were changed:

jobs:
  skip_individual_steps_job:
    runs-on: ubuntu-latest
    steps:
      - id: skip_check
        uses: fkirc/skip-duplicate-actions@v5
        with:
          cancel_others: 'false'
          paths: '["src/**", "dist/**"]'
      - if: steps.skip_check.outputs.should_skip != 'true'
        run: |
          echo "Run only if src/ or dist/ changed..." && sleep 30
          echo "Do other stuff..."

Example 3: Skip using paths_filter

Warning

If the paths_filter option is not working correctly, then you could copy the “example 1" multiple times according to your needs (see #326 for details).

The paths_filter option can be used if you have multiple jobs in a workflow and want to skip them based on different paths_ignore / paths patterns. When defining such filters, the action returns corresponding information in the paths_result output. For example in a monorepo, you might want to run jobs related to the "frontend" only if some files in the corresponding "frontend/" folder have changed and the same for "backend". This can be achieved with the following configuration:

jobs:
  pre_job:
    runs-on: ubuntu-latest
    outputs:
      should_skip: ${{ steps.skip_check.outputs.should_skip }}
      paths_result: ${{ steps.skip_check.outputs.paths_result }}
    steps:
      - id: skip_check
        uses: fkirc/skip-duplicate-actions@v5
        with:
          paths_filter: |
            frontend:
              paths_ignore:
                - 'frontend/docs/**'
              paths:
                - 'frontend/**'
            backend:
              paths:
                - 'backend/**'
          # Can be mixed with the "global" 'paths_ignore' / 'paths' options, for example:
          # paths_ignore: '["**/README.md"]'

  frontend:
    needs: pre_job
    # If 'skip-duplicate-actions' terminates before the paths checks are performed (for example, when a successful duplicate run has
    # been found) 'paths_result' outputs an empty object ('{}'). This can be easily intercepted in the if condition of a job
    # by checking the result of the "global" 'should_skip' output first.
    if: needs.pre_job.outputs.should_skip != 'true' && !fromJSON(needs.pre_job.outputs.paths_result).frontend.should_skip
    # ...

  backend:
    # ...

How does it work?

skip-duplicate-actions uses the Workflow Runs API to query workflow runs. skip-duplicate-actions will only look at workflow runs that belong to the same workflow as the current workflow run. After querying such workflow runs, it will compare them with the current workflow run as follows:

• If there exists a workflow run with the same tree hash, then we have identified a duplicate workflow run.
• If there exists an in-progress workflow run, then we can cancel it or skip, depending on your configuration.

How does path-skipping work?

As mentioned above, skip-duplicate-actions provides a path-skipping functionality that is somewhat similar to GitHub's native paths and paths_ignore functionality. However, path-skipping is not entirely trivial because there exist multiple options on how to do path-skipping:

Option 1: Only look at the "current" commit

This is the thing that GitHub is currently doing, and we consider it as insufficient because it does not work for "required" checks. Another problem is that the outcomes can be heavily dependent on the pushing-sequence of commits.

Option 2: Look at Pull-Request-diffs

PR-diffs are simple to understand, but they only work after opening a PR, not immediately after pushing a feature-branch.

Option 3: Look for successful checks of previous commits

This option is implemented by skip-duplicate-actions. An advantage is that this works regardless of whether you are using PRs or raw feature-branches, and of course it also works for "required" checks. Internally, skip-duplicate-actions uses the Repos Commit API to perform an efficient backtracking-algorithm for paths-skipping-detection.

This is how the algorithm works approximately:

stateDiagram-v2
    Check_Commit: Check Commit
    [*] --> Check_Commit: Current commit

    state Path_Ignored <<choice>>
    Check_Commit --> Path_Ignored: Do all changed files match against "paths_ignore"?
    Ignored_Yes: Yes
    Ignored_No: No
    Path_Ignored --> Ignored_Yes
    Path_Ignored --> Ignored_No

    state Path_Skipped <<choice>>
    Ignored_No --> Path_Skipped: Do none of the changed files match against "paths"?
    Skipped_Yes: Yes
    Skipped_No: No
    Path_Skipped --> Skipped_Yes: No matches
    Path_Skipped --> Skipped_No: Some matches

    Parent_Commit: Fetch Parent Commit
    Ignored_Yes --> Parent_Commit
    Skipped_Yes --> Parent_Commit

    state Successful_Run <<choice>>
    Parent_Commit --> Successful_Run: Is there a successful run for this commit?
    Run_Yes: Yes
    Run_No: No
    Successful_Run --> Run_Yes
    Successful_Run --> Run_No

    Run_No --> Check_Commit: Parent commit

    Skip: Skip!
    Run_Yes --> Skip: (Because all changes since this run are in ignored or skipped paths)

    Dont_Skip: Don't Skip!
    Skipped_No --> Dont_Skip: (Because changed files needs to be "tested")

Frequently Asked Questions

How to Use Skip Check With Required Matrix Jobs?

Discussed in #44.

If you have matrix jobs that are registered as required status checks and the matrix runs conditionally based on the skip check, you might run into the problem that the pull request remains in a unmergable state forever because the jobs are not executed at all and thus not reported as skipped (Expected - Waiting for status to be reported).

There are several approaches to circumvent this problem:

• Define the condition (if) in each step in the matrix job instead of a single condition on the job level: #44

• If you want the check to be considered successful only if all jobs in the matrix were successful, you can add a subsequent job whose only task is to report the final status of the matrix. Then you can register this final job as a required status check:

  result:
    name: Result
    if: needs.pre_job.outputs.should_skip != 'true' && always()
    runs-on: ubuntu-latest
    needs:
      - pre_job
      - example-matrix-job
    steps:
      - name: Mark result as failed
        if: needs.example-matrix-job.result != 'success'
        run: exit 1

• Define an opposite workflow, as offically suggested by GitHub: Handling skipped but required checks

Maintainers

• @paescuj
• @fkirc