Downloads | Command line arguments | Building | Changelog
spright is more than a simple sprite sheet packer, it can be used as one though. Its key ideas are:
- Keep all the information about the sprites and tiles, required for being efficiently consumable by the game engine, in a plain text file.
- Instead of forcing one to split each sprite in a separate file and later address them using the filename, it should be possible to keep them in whatever format they are most conveniently to handle.
- It should be possible to give each sprite an ID, group them (e.g. for animations) or further annotate them for game specific purposes.
- The tool should be able to deduce obvious information from the input images and assist with completing the required information.
While any text editor can be used for writing the configuration, the Visual Studio Code Extension can greatly simplify the process.
Also have a look at the spright test suite to get an impression of the functionality.
Introduction:
Reference:
To pack your sprites into one or more sheets, create an input definition file spright.conf
like the following and run spright
:
max-width 1024
max-height 1024
power-of-two true
output "out/sheet{0-}.png"
description "out/sheet.json"
template "phaser.inja"
id "{{source.filename}}"
glob "characters/**/*.png"
glob "scenery/**/*.png"
The sample creates an output description consumable by the Phaser game engine. Templates for different game engines are provided and additional templates for the output template engine can be easily written.
See the input definition section for a description of the available options.
Say you got some nice sprites you would like to use in your next game:
"Decorations (32x32).png" | "Old enemies 2.png" | "misc_scenery.png" | "OrcAttack/Frame01.png" to "OrcAttack/Frame04.png" |
---|---|---|---|
And your game engine supports efficiently packed sprite sheets like this:
Then you may want to use spright to define the sprites within their original sources and directly pack the sheet from there.
To do so, start by creating a spright.conf
containing the essential information:
sheet "sprites"
padding 1
output "sheet{0-}.png"
colorkey
crop
crop-pivot
input "Decorations (32x32).png"
grid 32 32
input "Old enemies 2.png"
grid 16 16
input "Orc Attack/Frame{01-04}.png"
input "misc_scenery.png"
atlas
When spright is called without command line arguments, the input definition is read from spright.conf
and it writes a spright.json
file containing the output description.
Passing the argument -m complete activates the auto-completion, which extends spright.conf
with automatically deduced information:
input "Decorations (32x32).png"
grid 32 32
sprite
sprite
sprite
sprite
sprite
row 1
sprite
sprite
sprite
sprite
sprite
...
It detected that Decorations (32x32).png
contains five sprites per row and added them below...
For sheets without grids it adds the sprites' rectangles:
...
input "misc_scenery.png"
atlas
sprite
rect 78 12 6 27
sprite
rect 88 12 4 24
sprite
rect 97 9 6 34
sprite
rect 107 8 7 40
sprite
rect 6 17 17 52
...
Now you can complete the definition manually by e.g. giving the sprites IDs and customizing their pivot points:
...
input "Decorations (32x32).png"
grid 32 32
pivot left top
sprite "banner_top"
sprite "platform_1_left"
sprite "platform_1_middle"
sprite "platform_1_right"
sprite "platform_1_sole"
row 2
sprite "banner_middle"
sprite "platform_2_left"
sprite "platform_2_middle"
sprite "platform_2_right"
sprite "platform_2_sole"
row 3
sprite "banner_bottom_1"
...
You can also tag sprites to define animations or other game specific properties and leave sprites you do not want to directly address without ID:
...
input "Old enemies 2.png"
grid 16 16
tag anim "blue_enemy_idle"
sprite
sprite
tag anim "blue_enemy_dead"
sprite
tag anim "blue_enemy_jump"
sprite
row 1
tag anim "blue_enemy_run"
sprite
sprite
sprite
sprite
sprite
sprite
row 2
...
The following section clarifies the effect of hierarchies.
See the output template engine section on how to generate a file consumable by your game engine.
Indentation is relevant in the hierarchical input definition file. There are two scoping rules:
- A definition affects succeeding subjects on the same or a sub-level.
- A definition affects its parent subject.
The comments in the following sample should exemplify these:
pivot center middle # sets default pivot point
input "furniture.png"
pivot center bottom # sets pivot point within "furniture.png"
sprite "chair"
sprite "lamp"
pivot center top # sets pivot point of "lamp"
sprite "bed"
input "characters.png"
sprite "player"
sprite "bird"
pivot center bottom # sets pivot point of "bird"
sprite "wolf" # "wolf" still gets the default pivot point
The following table contains a list of all definitions, with the item each affects, the expected arguments and a description. Optional arguments are enclosed in square brackets. Unless specified otherwise, optional booleans default to true, numbers default to 1, and an additional value defaults to the first value.
Definition | Affects | Arguments | Description |
---|---|---|---|
sheet | sprite | id | Sets the sheet on which the sprites should be packed (default: "spright" ). |
pack | sheet | pack-method | Sets the method, which is used for placing the sprites on the sheet: - binpack : Tries to reduce the texture size, while keeping the sprites' trimmed rectangle apart (default). - compact : Tries to reduce the texture size, while keeping the sprites' convex outlines apart. - rows : Layout sprites in simple rows. - columns : Layout sprites in simple columns. - single : Put each sprite on its own texture. - origin : Place all sprites in the top-left corner (use align to position). - layers : Like origin but also activates layered output of .gif files. - keep : Keep sprite at same position as in source. |
width | sheet | width | Sets a fixed sheet width. |
height | sheet | height | Sets a fixed sheet height. |
max-width | sheet | width | Sets a maximum sheet width. |
max-height | sheet | height | Sets a maximum sheet height. |
power-of-two | sheet | [boolean] | Restricts the sheet's size to be a power of two. |
square | sheet | [boolean] | Restricts the sheet's size to be square. |
divisible-width | sheet | pixels | Restricts the sheet's width to be divisible by a certain number of pixels. |
allow-rotate | sheet | [boolean] | Allows to rotate sprites clockwise by 90 degrees for improved packing efficiency. |
padding | sheet | [pixels], [pixels] | Sets the space between two sprites / the space between a sprite and the texture's border. |
duplicates | sheet | dedupe-mode | Sets how identical sprites should be processed: - keep : Disable duplicate detection (default). - share : Identical sprites should share pixels on the sheet. - drop : Duplicates should be dropped. |
output | sheet | path | Adds a new output file at path to a sheet. It can define an un-/bounded sequence of files (e.g. "sheet{0-}.png" ). See a list of available variables. |
debug | output | [boolean] | Draw sprite boundaries and pivot points on output. |
scale | output | scale, [scale-filter] |
Sets a factor the output should be scaled by, with an optional explicit scale-filter: - box : A trapezoid with 1-pixel wide ramps. - triangle : A triangle function (same as bilinear texture filtering). - cubicspline : A cubic b-spline (gaussian-esque). - catmullrom : An interpolating cubic spline. - mitchell : Mitchell-Netrevalli filter with B=1/3, C=1/3. |
maps | output/input | suffix+ | Specifies the number of maps and their filename suffixes (e.g. "-diffuse", "-normals", ...). Only the first map is considered when packing, others get identical rects. |
alpha | output | alpha-mode, [color] |
Sets an operation depending on the pixels' alpha values: - keep : Keep source color and alpha. - opaque : Makes all pixels opaque. - clear : Replace fully transparent pixels with the specified color (defaults to black). - bleed : Set color of fully transparent pixels to their nearest non-fully transparent pixel's color. - premultiply : Premultiply colors with alpha values. - colorkey : Replace fully transparent pixels with the specified color and make all others opaque. |
glob | - | pattern | Adds all files matching the pattern as inputs (e.g. "sprites/**/*.png" ). |
input | - | path | Adds a new input file at path. It can define a single file or an un-/bounded sequence of files (e.g. "frames{0-}.png", "frames{0001-0013}.png" ). |
path | input | path | A path which should be prepended to the input's path. |
colorkey | input | [color] | Specifies that the input has a color, which should be considered transparent (in hex notation e.g. FF00FF ). |
grid | input | x, y | Specifies that the input contains multiple sprites, arranged in a grid of a certain cell size. In this mode the rect of each sprite is deduced from the grid. Each sprite automatically advances the current cell horizontally. |
grid-cells | input | x, y | As grid, but specifies the number of cells instead of their size. When the cells are squares, one dimension is allowed to be 0, so it is automatically deduced. |
grid-offset | input | x, [y], [r-x], [b-y] |
Offsets the grid from the top-left corner by a number of pixels. Optionally the grid's offset from the bottom-right corner can also be specified, which is used when deducing the cell-size using grid-cells. |
grid-spacing | input | x, [y] | Sets a spacing between the grid cells. |
row | input | row | Sets a sprite's vertical offset within a grid (starting with 0). |
skip | input | [count] | Skips one or more horizontal grid cells or indices in file sequences (a non-numeric parameter is treated as 1, to allow simple substitutions of sprite). |
atlas | input | [pixels] | Specifies that the input contains multiple unaligned sprites, separated by more than a specific number of transparent pixel rows. |
sprite | - | [id] | Adds a new sprite to an input and optionally sets its id. |
id | sprite | id | Sets the sprite's id (defaults to "sprite_{{index}}" ). See list of available variables. |
span | sprite | columns, rows | Sets the number of grid cells a sprite spans. |
rect | sprite | x, y, width, height | Sets a sprite's rectangle in the input sheet. |
pivot | sprite | pivot-x, pivot-y | Sets the coordinates of the sprite's pivot point. Optionally the horizontal (left, center, right) and vertical (top, middle, bottom) origin of the coordinates can be set (e.g. 10 20 / right - 5, top + 3 / bottom left). |
trim | sprite | trim-mode | Sets a mode for trimming, which reduces the sprite to the non-transparent region: - none : Do not trim. - rect : Trim to rectangular region (default). - convex : Trim to convex region (vertices are set in output description). |
trim-channel | sprite | channel | Sets the channel which should be considered during trimming: - alpha : The alpha channel of a pixel (default). - gray : The gray level of the pixel. |
trim-threshold | sprite | value | Sets the value which should be considered non-transparent during trimming (1 - 255). |
trim-margin | sprite | [pixels] | Sets a number of transparent pixel rows around the sprite, which should not be removed by trimming. |
crop | sprite | [boolean] | Sets whether the sprite's rectangle should be reduced to the trimmed bounds. |
crop-pivot | sprite | [boolean] | Sets whether the sprite's pivot point should be relative to the trimmed bounds. |
extrude | sprite | [pixels], [wrap-mode] |
Adds a padding around the sprite and fills it depending on the wrap-mode : - clamp : Clamp to border pixels (default). - mirror : Mirror border pixels. - repeat : Repeat border pixels. |
min-bounds | sprite | x, [y] | Sets a sprite's minimum bounds, which is the total space it allocates on the output. Smaller sprites are surrounded with transparency. |
divisible-bounds | sprite | x, [y] | Restricts the sprite's bounds to be divisible by a certain number of pixels. |
common-bounds | sprite | [key] | Makes all sprites with identical keys expand to common bounds. |
align | sprite | align-x, align-y | Sets the alignment of the sprite within its bounds. The parametrization works as for pivot points. |
align-pivot | sprite | [key] | Aligns all sprites with identical keys, so their pivot points have identical offsets within the sprites' bounds. |
tag | sprite | key, [value] | Adds a tag to a sprite (value defaults to an empty string). See list of available variables. |
data | sprite | key, value | Adds a user defined data entry to a sprite. |
description | - | filename | Adds an additional location where the output description should be written. |
template | description | filename | Sets the template which should be used for generating the output description. |
set | - | key, value | Sets a variable value, which can be accessed in different places using {{key}} . See a list of existing variables. |
group | - | - | Can be used for opening a new scope, to limit for example the effect of a tag. |
Beside variables defined by set
the following variables can be accessed in string parameters using {{variable}}
. They are evaluated before the description is output.
In sprite
definitions:
index
, inputIndex
, inputSpriteIndex
(the sprite's index in the input), sheet.id
source.filename
, source.dirname
.
In output
definitions:
index
, sheet.id
, sprite.id
(the first sprite's id).
By default a JSON file containing all the information about the sprites is written to spright.json
. It has the following structure:
{
"sprites": [
{
"id": "sprite_0",
"index": 0,
"inputIndex": 0,
"inputSpriteIndex": 0,
"pivot": { "x": 8.0, "y": 8.0 },
"rect": { "x": 0, "y": 0, "w": 16, "h": 16 },
"trimmedRect": { "x": 0, "y": 0, "w": 16, "h": 16 },
"rotated": false,
"sourceIndex": 0,
"sourceRect": { "x": 0, "y": 0, "w": 16, "h": 16 },
"trimmedSourceRect": { "x": 0, "y": 0, "w": 16, "h": 16 },
"sliceIndex": 0,
"sliceSpriteIndex": 0,
"data": { "key": "value" },
"tags": { "key": "value" },
"vertices": [ 0.0, 0.0, 16.0, 0.0, 16.0, 16.0, 0.0, 16.0 ]
}
],
"slices": [
{
"spriteIndices": [0]
}
],
"sources": [
{
"filename": "source.png",
"path": "path",
"width": 256,
"height": 256,
}
],
"inputs": [
{
"filename": "source.png",
"sources": [
{
"index": 0,
"spriteIndices": [0]
}
]
}
],
"tags": {
"key": {
"value": [0]
}
},
"textures": [
{
"sliceIndex": 0,
"spriteIndices": [0],
"filename": "path/spright-0.png",
"width": 256,
"height": 256,
"scale": 1.0,
"map": ""
}
]
}
This spright.json was generated from the sample above. As you can see, it is very verbose and only intended as an intermediate file, which should be transformed using the template engine.
With the power of the inja template engine it should be possible to transform the output description to a text file consumable by your game engine.
A template is selected with the -t or --template and the output filename with the -o or --output parameter:
spright -t cpp.inja -o spright.h
This is what a simple template, that transforms the IDs of the output description's sprites into a JavaScript array initialization, looks like:
let sprite_ids = [
{% for sprite in sprites %}
"{{ sprite.id }}",
{% endfor %}
];
For information about the functionality of the template engine, please see the inja reference and the provided templates:
The following templates are already available:
Target | Template |
---|---|
C++ | cpp.inja |
Cocos2d-x | cocos2dx.inja |
Phaser 3 | phaser.inja |
Phaser 2 | phaser2.inja |
PixiJS | pixijs.inja |
The C++ template is just an example for how the sprite description can be directly embedded in code. This spright.h was generated from the sample, using the cpp.inja template.
Usage: spright [-options]
-m, --mode <mode> sets the run mode:
'update' the default run mode.
'rebuild' regenerate output even when input did not change.
'describe' only output description, no texture files.
'describe-input' only output description of input, do not pack.
'complete' [pattern] autocomplete inputs (matching optional pattern).
-i, --input <file> input definition file (default: spright.conf).
-o, --output <file> output file containing either the output
description (default: spright.json) or the
autocompleted input definition (defaults to --input).
-t, --template <file> template for the output description.
-p, --path <path> path to prepend to all output files.
-v, --verbose enable verbose messages.
-h, --help print this help.
The special identifiers stdin and stdout can be passed to input and output to enable console redirection.
A C++17 conforming compiler is required. A script for the CMake build system is provided.
Installing dependencies on Debian Linux and derivatives:
sudo apt install build-essential git cmake
Checking out the source:
git clone --recurse-submodules https://github.com/houmain/spright
Building:
cd spright
cmake -B build
cmake --build build
spright is released under the GNU GPLv3. It comes with absolutely no warranty. Please see LICENSE
for license details.
All image files are derived from files released as CC0 on OpenGameArt.