Make SendStream::poll_capacity never return Ok(Some(0)) (fixes #270)

src/proto/streams/prioritize.rs

@@ -51,6 +51,9 @@ pub(super) struct Prioritize {
 
     /// What `DATA` frame is currently being sent in the codec.
     in_flight_data_frame: InFlightData,
+
+    /// The maximum amount of bytes a stream should buffer.
+    max_buffer_size: usize,
 }
 
 #[derive(Debug, Eq, PartialEq)]
@@ -93,9 +96,14 @@ impl Prioritize {
             flow,
             last_opened_id: StreamId::ZERO,
             in_flight_data_frame: InFlightData::Nothing,
+            max_buffer_size: config.local_max_buffer_size,
         }
     }
 
+    pub(crate) fn max_buffer_size(&self) -> usize {
+        self.max_buffer_size
+    }
+
     /// Queue a frame to be sent to the remote
     pub fn queue_frame<B>(
         &mut self,
@@ -424,7 +432,7 @@ impl Prioritize {
             tracing::trace!(capacity = assign, "assigning");
 
             // Assign the capacity to the stream
-            stream.assign_capacity(assign);
+            stream.assign_capacity(assign, self.max_buffer_size);
 
             // Claim the capacity from the connection
             self.flow.claim_capacity(assign);
@@ -744,7 +752,7 @@ impl Prioritize {
                                 // If the capacity was limited because of the
                                 // max_send_buffer_size, then consider waking
                                 // the send task again...
-                                stream.notify_if_can_buffer_more();
+                                stream.notify_if_can_buffer_more(self.max_buffer_size);
 
                                 // Assign the capacity back to the connection that
                                 // was just consumed from the stream in the previous

src/proto/streams/send.rs

@@ -28,9 +28,6 @@ pub(super) struct Send {
     /// > the identified last stream.
     max_stream_id: StreamId,
 
-    /// The maximum amount of bytes a stream should buffer.
-    max_buffer_size: usize,
-
     /// Initial window size of locally initiated streams
     init_window_sz: WindowSize,
 
@@ -55,7 +52,6 @@ impl Send {
     pub fn new(config: &Config) -> Self {
         Send {
             init_window_sz: config.remote_init_window_sz,
-            max_buffer_size: config.local_max_buffer_size,
             max_stream_id: StreamId::MAX,
             next_stream_id: Ok(config.local_next_stream_id),
             prioritize: Prioritize::new(config),
@@ -340,7 +336,9 @@ impl Send {
         let available = stream.send_flow.available().as_size() as usize;
         let buffered = stream.buffered_send_data;
 
-        available.min(self.max_buffer_size).saturating_sub(buffered) as WindowSize
+        available
+            .min(self.prioritize.max_buffer_size())
+            .saturating_sub(buffered) as WindowSize
     }
 
     pub fn poll_reset(

src/proto/streams/stream.rs

@@ -260,30 +260,29 @@ impl Stream {
         self.ref_count == 0 && !self.state.is_closed()
     }
 
-    pub fn assign_capacity(&mut self, capacity: WindowSize) {
+    pub fn assign_capacity(&mut self, capacity: WindowSize, max_buffer_size: usize) {
         debug_assert!(capacity > 0);
-        self.send_capacity_inc = true;
         self.send_flow.assign_capacity(capacity);
 
         tracing::trace!(
-            "  assigned capacity to stream; available={}; buffered={}; id={:?}",
+            "  assigned capacity to stream; available={}; buffered={}; id={:?}; max_buffer_size={}",
             self.send_flow.available(),
             self.buffered_send_data,
-            self.id
+            self.id,
+            max_buffer_size
         );
 
-        // Only notify if the capacity exceeds the amount of buffered data
-        if self.send_flow.available() > self.buffered_send_data {
-            tracing::trace!("  notifying task");
-            self.notify_send();
-        }
+        self.notify_if_can_buffer_more(max_buffer_size);
     }
 
     /// If the capacity was limited because of the max_send_buffer_size,
     /// then consider waking the send task again...
-    pub fn notify_if_can_buffer_more(&mut self) {
+    pub fn notify_if_can_buffer_more(&mut self, max_buffer_size: usize) {
+        let available = self.send_flow.available().as_size() as usize;
+        let buffered = self.buffered_send_data;
+
         // Only notify if the capacity exceeds the amount of buffered data
-        if self.send_flow.available() > self.buffered_send_data {
+        if available.min(max_buffer_size) > buffered {
             self.send_capacity_inc = true;
             tracing::trace!("  notifying task");
             self.notify_send();

tests/h2-support/src/util.rs

@@ -32,6 +32,7 @@ pub async fn yield_once() {
     .await;
 }
 
+/// Should only be called after a non-0 capacity was requested for the stream.
 pub fn wait_for_capacity(stream: h2::SendStream<Bytes>, target: usize) -> WaitForCapacity {
     WaitForCapacity {
         stream: Some(stream),
@@ -59,6 +60,11 @@ impl Future for WaitForCapacity {
 
             let act = self.stream().capacity();
 
+            // If a non-0 capacity was requested for the stream before calling
+            // wait_for_capacity, then poll_capacity should return Pending
+            // until there is a non-0 capacity.
+            assert_ne!(act, 0);
+
             if act >= self.target {
                 return Poll::Ready(self.stream.take().unwrap().into());
             }

tests/h2-tests/tests/flow_control.rs

@@ -1600,7 +1600,62 @@ async fn poll_capacity_after_send_data_and_reserve() {
         // Initial window size was 5 so current capacity is 0 even if we just reserved.
         assert_eq!(stream.capacity(), 0);
 
-        // The first call to `poll_capacity` in `wait_for_capacity` will return 0.
+        // This will panic if there is a bug causing h2 to return Ok(0) from poll_capacity.
+        let mut stream = h2.drive(util::wait_for_capacity(stream, 5)).await;
+
+        stream.send_data("".into(), true).unwrap();
+
+        // Wait for the connection to close
+        h2.await.unwrap();
+    };
+
+    join(srv, h2).await;
+}
+
+#[tokio::test]
+async fn poll_capacity_after_send_data_and_reserve_with_max_send_buffer_size() {
+    h2_support::trace_init!();
+    let (io, mut srv) = mock::new();
+
+    let srv = async move {
+        let settings = srv
+            .assert_client_handshake_with_settings(frames::settings().initial_window_size(10))
+            .await;
+        assert_default_settings!(settings);
+        srv.recv_frame(frames::headers(1).request("POST", "https://www.example.com/"))
+            .await;
+        srv.send_frame(frames::headers(1).response(200)).await;
+        srv.recv_frame(frames::data(1, &b"abcde"[..])).await;
+        srv.send_frame(frames::window_update(1, 10)).await;
+        srv.recv_frame(frames::data(1, &b""[..]).eos()).await;
+    };
+
+    let h2 = async move {
+        let (mut client, mut h2) = client::Builder::new()
+            .max_send_buffer_size(5)
+            .handshake::<_, Bytes>(io)
+            .await
+            .unwrap();
+        let request = Request::builder()
+            .method(Method::POST)
+            .uri("https://www.example.com/")
+            .body(())
+            .unwrap();
+
+        let (response, mut stream) = client.send_request(request, false).unwrap();
+
+        let response = h2.drive(response).await.unwrap();
+        assert_eq!(response.status(), StatusCode::OK);
+
+        stream.send_data("abcde".into(), false).unwrap();
+
+        stream.reserve_capacity(5);
+
+        // Initial window size was 10 but with a max send buffer size of 10 in the client,
+        // so current capacity is 0 even if we just reserved.
+        assert_eq!(stream.capacity(), 0);
+
+        // This will panic if there is a bug causing h2 to return Ok(0) from poll_capacity.
         let mut stream = h2.drive(util::wait_for_capacity(stream, 5)).await;
 
         stream.send_data("".into(), true).unwrap();