Skip to content

jakemas/pq-strongswan

BranchesTags

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

41 Commits

carol

carol

 
 

moon

moon

 
 

scripts

scripts

 
 

Dockerfile

Dockerfile

 
 

README.md

README.md

 
 

docker-compose.yml

docker-compose.yml

 
 

Repository files navigation

pq-strongswan

Build and run a strongSwan 6.0dr Post-Quantum IKEv2 Daemon in a Docker image. The current prototype implementation is based on the two following IETF Internet Drafts:

  • draft-ietf-ipsecme-ikev2-multiple-ke: Multiple Key Exchanges in IKEv2. This draft describes how to extend the Internet Key Exchange Protocol Version 2 (IKEv2) to allow multiple key exchanges to take place while computing a shared secret during a Security Association (SA) setup.
  • draft-ietf-ipsecme-ikev2-intermediate: Intermediate Exchange in the IKEv2 Protocol. This draft defines a new exchange, called Intermediate Exchange, for IKEv2. This exchange can be used for transferring large amount of data in the process of IKEv2 SA establishment. These intermediate messages are used by ietf-ipsecme-ikev2-multiple-ke to perform the multiple key exchanges.

Branches

There are two branches in this repo, they both represent different network architecture:

  • The site-to-site (and thus also main) branch represents a site-to-site VPN connection. A site-to-site VPN is a connection between two or more networks, such as a corporate network and a branch office network. This example is a combination of the docker image built to showcase PQ strongSwan by Andreas Steffen, and the strongSwan configuration example net2net-psk. We default main to this type of connection, as it most closely replicates that of the site-to-site connection in AWS VPN.
  • The road-warrior branch represents a Road Warrior - VPN gateway connection. Road Warriors are remote users who want to connect to a network. This example is a combination of the docker image built to showcase PQ strongSwan by Andreas Steffen, and the strongSwan configuration example rw-ntru-psk.

There is more detail in this readme about the particular network configuration of the branch.

Prerequisites

This package and guide is written for ubuntu. All testing was done on an EC2 instance Ubuntu Server 20.04 LTS (HVM), SSD Volume Type - ami-0ff4c8fb495a5a50d. A t2-medium instance with 8Gb of storage works just fine.

Table of Contents

  1. Docker Setup
  2. strongSwan Configuration
  3. Start up the IKEv2 Daemons
  4. Establish the IKE SA and first Child SA
  5. Use the IPsec Tunnels
  6. Rekeying of first CHILD SA
  7. Rekeying of IKE SA
  8. SA Status after Rekeying
  9. Other PQ KEMs

Docker Setup

Install Docker

Instructions from Docker installation guide https://docs.docker.com/engine/install/ubuntu/:

Update the apt package index and install packages to allow apt to use a repository over HTTPS:

$ sudo apt-get update
$ sudo apt-get install \
    apt-transport-https \
    ca-certificates \
    curl \
    gnupg-agent \
    software-properties-common

Add Docker’s official GPG key:

$ curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -

Use the following command to set up the stable repository:

$ sudo add-apt-repository \
   "deb [arch=amd64] https://download.docker.com/linux/ubuntu \
   $(lsb_release -cs) \
   stable"

Install Docker engine:

$ sudo apt-get update
$ sudo apt-get install docker-ce docker-ce-cli containerd.io

Install docker-compose

Instructions from docker-compose installation guide https://docs.docker.com/compose/install/:

Download the current stable release of Docker Compose:

$ sudo curl -L "https://github.com/docker/compose/releases/download/1.27.4/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose

Apply executable permissions to the binary:

$ sudo chmod +x /usr/local/bin/docker-compose

Pull Docker Image

$ git clone https://github.com/jakemas/pq-strongswan.git

Build Docker Image

$ cd pq-strongswan
$ docker build --tag pq-strongswan:6.0dr3 .

NOTE: docker and IPSec commands require sudo permissions. You may need to prepend sudo to the command docker build --tag pq-strongswan:6.0dr3 . and other following commands. Alternatively, you may run sudo su.

This may take a few minutes (perhaps make yourself a cup of tea). The Docker image is installing liboqs and strongswan, which can take some time. This build only needs to be done once. When complete, the configuration files of the VPN can be modified and changed without the need of this lengthy step. This step can be moved to dockerhub, so that the built image can simply be downloaded and this build can be avoided, however I am not familiar with how to do this privately, so for now we build it ourselves.

Create Docker Containers and Local Networks

We first create empty directories in Carol and Moon using the command sh scripts/gen_dirs.sh to execute gen_dirs/sh. These directories are added to better emulate real users and prevent warnings and errors produced by the IKEv2 daemon when starting up the connection. We use docker-compose to bring the moon and carol docker containers up:

$ sh scripts/gen_dirs.sh
$ docker-compose up
Creating moon ... done
Creating carol ... done
Attaching to moon, carol

As we will have multiple terminal windows open for each client, we shall refer to this window as terminal-monitor. We keep this terminal window open, as we will come back to it shortly.

The network topology that has been created looks as follows:

               +-------+                        +--------+
  10.3.0.1 --- | carol | === 192.168.0.0/24 === |  moon  | --- 10.1.0.2
 Virtual IP .3 +-------+ .3     Internet     .2 +--------+ .2  Virtual IP

VPN client carol and VPN gateway moon are connected with each other via the 192.168.0.0/24 network emulating the Internet. Within the IPsec tunnel carol is going to use the virtual IP address 10.3.0.3 that will be assigned to the client by the gateway via the IKEv2 protocol.

strongSwan Configuration

strongSwan options can be configured in the /etc/strongswan.conf file which in our case contains the startup scripts and a logging directive diverting the debug output to stderr. We also define the size of the IP fragments and the maximum IKEv2 packet size which can be quite considerable with some post-quantum Key Exchange Methods.

charon {
   filelog {
      stderr {
         default = 1
      }
   }
   send_vendor_id = yes
   fragment_size = 1480
   max_packet = 30000
}

NIST Round 3 Submission KEM Candidates

Keyword Key Exchange Method Keyword Key Exchange Method Keyword Key Exchange Method
kyber1 KYBER_L1 kyber3 KYBER_L3 kyber5 KYBER_L5
ntrup1 NTRU_HPS_L1 ntrup3 NTRU_HPS_L3 ntrup5 NTRU_HPS_L5
ntrur3 NTRU_HRSS_L3
saber1 SABER_L1 saber3 SABER_L3 saber5 SABER_L5

NIST Alternate KEM Candidates

Keyword Key Exchange Method Keyword Key Exchange Method Keyword Key Exchange Method
frodoa1 FRODO_AES_L1 frodoa3 FRODO_AES_L3 frodoa5 FRODO_AES_L5
frodos1 FRODO_SHAKE_L1 frodos3 FRODO_SHAKE_L3 frodos5 FRODO_SHAKE_L5
sike1 SIKE_L1 sike3 SIKE_L3 sike5 SIKE_L5
sike2 SIKE_L2

The KEM algorithms listed above are implemented by the strongSwan oqs plugin which in turn uses the liboqs Open Quantum-Safe library. There is also a frodo plugin which implements the FrodoKEM algorithm with strongSwan crypto primitives. There is currently no support for the BIKE and HQC alternate KEM candidates. Classic McEliece , although being a NIST round 3 submission KEM candidate, is not an option for IKE due to the huge public key size of more than 100 kB.

VPN Configuration

In order to establish a VPN between Carol and Moon, both must set up the VPN through configuration files. The three files needed on both Carol and Moon are ipsec.conf, ipsec.secrets and strongswan.conf.

  • ipsec.conf: this file defines general configuration parameters and defines connections. The general configuration options are set in the conn %default section, these are values such as the key exchange mechanism (e.g., IKEv1 or IKEv2), the key life time and rekeying cadence, authentication types, and cipher suite options. Individual connections, such as conn Tunnel1 define more specific parameters, such as the IP addresses, IDs and subnets being used for the connection. All conn sections inherit the parameters defined in the conn %default section.

  • ipsec.secrets: this file contains cryptographic secrets, such as RSA, ECSDA, EAP or PSKs. In our case, the PSK used for authentication is stored within this file, with the respective ID selectors for both Carol and Moon.

  • strongswan.conf: this file contains configuration options for strongSwan. It can be used to automatically load and start connections, as well as set debug/logging options. In our case we use this file to modify the size of the IP fragments and the maximum IKEv2 packet size.

We give example ipsec.conf, ipsec.secrets and strongswan.conf that utilize hybrid post-quantum key exchange for this prototype. These three files can be modified to build/test various connections – the desired use of this repository is to provide such a framework to allow this, without the need to worry about networking issues. The three configuration files are found in /carol/ and /moon/ directories. When the docker image is brought up, these three files are placed on the image container for both Carol and Moon respectively -- by the configuration set within the docker-compose.yml file.

VPN Client Configuration

This is the ipsec.conf connection configuration file of the client carol:

config setup

conn %default
        ikelifetime=60m
        lifetime=20m
        rekeymargin=3m
        keyingtries=1
        keyexchange=ikev2
        ike=aes256gcm16-sha512-x25519-ke1_kyber3
        esp=aes256gcm16-sha512-x25519-ke1_kyber3
        authby=psk

conn Tunnel1
        left=192.168.0.3
        leftid=carol.strongswan.org
        leftsubnet=10.3.0.1/16
        right=192.168.0.2
        rightsubnet=10.1.0.0/16
        rightid=moon.strongswan.org
        auto=add

NOTE: you may see other connections appear in this list, such as Tunnel2 and Tunnel3. Ignore these for now, these are additional tunnels we create with different cipher suites, and will be discussed later in the section: Other PQ KEMs.

The child security association Tunnel1 is defined. It connects the client with the IP address of the gateway 192.168.0.2. We choose to use aes256gcm16-sha512-x25519-ke1_kyber3 as our cipher suite. A full list of cipher suites and keywords for their use can be found at strongSwan IKEv2 Cipher Suites. The choice aes256gcm16-sha512-x25519-ke1_kyber3uses:

  • Encryption Algorithm aes256gcm16: 256 bit AES-CCM with 128 bit ICV.
  • Integrity Algorithm sha512: SHA2_512_256 HMAC.
  • Key Exchange Algorithm x25519: Elliptic Curve Diffie-Hellman with 256 bit Elliptic Curve25519.
  • Key Exchange Algorithm ke1_kyber3: Kyber Level 3 (At least as hard to break as AES192 - 96 bit quantum security).

Other NIST round 3 submission candidates can be tested, using their respective keyword from the table provided above. The draft-ietf-ipsecme-ikev2-multiple-ke also facilitates the use of more than two key exchanges, for example:

aes256gcm16-sha512-x25519-ke1_kyber3-ke2_ntrup3-ke3_saber3

will negotiate a hybrid key exchange that will use X25519 elliptic curve for the initial exchange, followed by three rounds of post-quantum key exchanges consisting of the Kyber, NTRU and Saber algorithms, all of them on NIST security level 3.

VPN Gateway Configuration

This is the ipsec.conf connection configuration file of the gateway moon:

config setup

conn %default
        ikelifetime=60m
        lifetime=20m
        rekeymargin=3m
        keyingtries=1
        keyexchange=ikev2
        ike=aes256gcm16-sha512-x25519-ke1_kyber3
        esp=aes256gcm16-sha512-x25519-ke1_kyber3
        authby=psk

conn Tunnel1
        left=192.168.0.2
        leftsubnet=10.1.0.0/16
        leftid=moon.strongswan.org
        right=192.168.0.3
        rightsubnet=10.3.0.0/16
        rightid=carol.strongswan.org
        auto=add

Start up the IKEv2 Daemons

On VPN Gateway "moon"

In an additional console window we refer to as terminal-moon we open a bash shell to start and manage the strongSwan daemon in the moon container (again, you may need to first run sudo su):

$ docker exec -ti moon /bin/bash
$ ipsec start
Starting strongSwan 6.0dr3 IPsec [starter]...

Back in the terminal from which we started the docker image terminal-monitor, we now see an update:

Starting moon ... done
Starting carol ... done
Attaching to moon, carol
moon     | bash-5.0# ipsec_starter[12]: Starting strongSwan 6.0dr3 IPsec [starter]...
moon     | 
moon     | ipsec_starter[15]: charon (16) started after 20 ms
moon     |

On VPN Client "carol"

In an additional console window we refer to as terminal-carol we open a bash shell to start and manage the strongSwan daemon in the carol container:

$ docker exec -ti carol /bin/bash
$ ipsec start
Starting strongSwan 6.0dr3 IPsec [starter]...

Back in the terminal from which we started the docker image terminal-monitor, we now see a second update:

Starting moon ... done
Starting carol ... done
Attaching to moon, carol
moon     | bash-5.0# ipsec_starter[12]: Starting strongSwan 6.0dr3 IPsec [starter]...
moon     | 
moon     | ipsec_starter[15]: charon (16) started after 20 ms
moon     | 
carol    | bash-5.0# ipsec_starter[14]: Starting strongSwan 6.0dr3 IPsec [starter]...
carol    | 
carol    | ipsec_starter[17]: charon (18) started after 20 ms
carol    |

We can see the status of the connection with ipsec status

carol# ipsec statusall
Status of IKE charon daemon (strongSwan 6.0dr3, Linux 5.4.0-1029-aws, x86_64):
  uptime: 99 seconds, since Nov 19 12:59:35 2020
  malloc: sbrk 1351680, mmap 0, used 333888, free 1017792
  worker threads: 11 of 16 idle, 5/0/0/0 working, job queue: 0/0/0/0, scheduled: 0
  loaded plugins: charon aes des rc2 sha2 sha1 md5 mgf1 random nonce x509 revocation constraints pubkey pkcs1 pkcs7 pkcs8 pkcs12 pgp dnskey sshkey pem fips-prf gmp curve25519 xcbc cmac hmac gcm ntru oqs drbg attr kernel-netlink resolve socket-default stroke vici updown xauth-generic counters
Listening IP addresses:
  192.168.0.3
Connections:
     Tunnel1:  192.168.0.3...192.168.0.2  IKEv2
     Tunnel1:   local:  [carol.strongswan.org] uses pre-shared key authentication
     Tunnel1:   remote: [moon.strongswan.org] uses pre-shared key authentication
     Tunnel1:   child:  10.3.0.0/16 === 10.1.0.0/16 TUNNEL
Security Associations (0 up, 0 connecting):
  none

Similarly, this can be done with the swanctl --list-conns command:

carol# swanctl --list-conns
Tunnel1: IKEv2, reauthentication every 3420s, no rekeying
  local:  192.168.0.3
  remote: 192.168.0.2
  local pre-shared key authentication:
    id: carol.strongswan.org
  remote pre-shared key authentication:
    id: moon.strongswan.org
  Tunnel1: TUNNEL, rekeying every 1020s
    local:  10.3.0.0/16
    remote: 10.1.0.0/16

NOTE: you may see other connections appear in this list, such as Tunnel2 and Tunnel3. Ignore these for now, these are additional tunnels we create with different cipher suites, and will be discussed later in the section: Other PQ KEMs.

Establish the IKE SA and first Child SA

For IKEv2, the Security Association (SA) that carries IKE messages is referred to as the IKE SA, and the SAs for the Encapsulating Security Payload (ESP) and Authentication Header (AH) are child SAs. We do this using ipsec up Tunnel1, however this can also be done using swanctl --initiate --child Tunnel1.

carol# ipsec up Tunnel1
[IKE] initiating IKE_SA Tunnel1[1] to 192.168.0.2
[ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(IKE_INT_SUP) V ]
[NET] sending packet: from 192.168.0.3[500] to 192.168.0.2[500] (724 bytes)

We see that client carol sends the IKEV2_FRAGMENTATION_SUPPORTED (FRAG_SUP) and INTERMEDIATE_EXCHANGE_SUPPORTED (IKE_INT_SUP) notifications in the IKE_SA_INIT request, for the two mechanisms required to enable a post-quantum key exchange.

Also a traditional KEY_EXCHANGE (KE) payload is sent which contains the public factor of the legacy X25519 elliptic curve Diffie-Hellman group.

[NET] received packet: from 192.168.0.2[500] to 192.168.0.3[500] (276 bytes)
[ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(CHDLESS_SUP) N(IKE_INT_SUP) N(MULT_AUTH) V ]

Gateway moon supports the same mechanisms so that a post-quantum key exchange should succeed and its KE payload in turn allows to form a first SKEYSEED master secret that is used to derive IKEv2 encryption and data integrity session keys so that the subsequent IKE_INTERMEDIATE messages in a secure way.

[IKE] received strongSwan vendor ID
[CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_512/CURVE_25519/KE1_KYBER_L3

The negotiated hybrid key exchange will use the X25519 elliptic curve for the initial exchange, followed by a post-quantum key exchange consisting of the Kyber algorithm on NIST security level 3.

[ENC] generating IKE_INTERMEDIATE request 1 [ KE ]
[NET] sending packet: from 192.168.0.3[500] to 192.168.0.2[500] (1249 bytes)
[NET] received packet: from 192.168.0.2[500] to 192.168.0.3[500] (1153 bytes)
[ENC] parsed IKE_INTERMEDIATE response 1 [ KE ]

The KYBER_L3 key exchange defined as ADDITIONAL_KEY_EXCHANGE_1has been completed and the derived secret has been added to the SKEYSEED master secret.

[IKE] authentication of '192.168.0.3' (myself) with pre-shared key
[IKE] establishing CHILD_SA Tunnel1{1}
[ENC] generating IKE_AUTH request 2 [ IDi N(INIT_CONTACT) IDr AUTH SA TSi TSr N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ]
[NET] sending packet: from 192.168.0.3[500] to 192.168.0.2[500] (413 bytes)
[NET] received packet: from 192.168.0.2[500] to 192.168.0.3[500] (237 bytes)
[ENC] parsed IKE_AUTH response 2 [ IDr AUTH SA TSi TSr N(AUTH_LFT) ]
[IKE] authentication of '192.168.0.2' with pre-shared key successful
[IKE] IKE_SA Tunnel1[1] established between 192.168.0.3[carol.strongswan.org]...192.168.0.2[moon.strongswan.org]
[IKE] scheduling reauthentication in 3268s
[IKE] maximum IKE_SA lifetime 3448s
[CFG] selected proposal: ESP:AES_GCM_16_256/NO_EXT_SEQ
[IKE] CHILD_SA Tunnel1{1} established with SPIs cb7bdaa5_i c9c43a36_o and TS 10.3.0.0/16 === 10.1.0.0/16
[IKE] received AUTH_LIFETIME of 3377s, scheduling reauthentication in 3197s
initiate completed successfully

Use the IPsec Tunnels

First we ping the network behind gateway moon

carol# ping -c 2 10.1.0.2
PING 10.1.0.2 (10.1.0.2) 56(84) bytes of data.
64 bytes from 10.1.0.2: icmp_seq=1 ttl=64 time=0.104 ms
64 bytes from 10.1.0.2: icmp_seq=2 ttl=64 time=0.114 ms

--- 10.1.0.2 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1017ms
rtt min/avg/max/mdev = 0.104/0.109/0.114/0.005 ms

and then the gateway moon on its external IP address itself

carol# ping -c 1 192.168.0.2
PING 192.168.0.2 (192.168.0.2) 56(84) bytes of data.
64 bytes from 192.168.0.2: icmp_seq=1 ttl=64 time=0.063 ms

--- 192.168.0.2 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.063/0.063/0.063/0.000 ms

Now let's have a look at the established tunnel connections:

$carol# swanctl --list-sas
Tunnel1: #1, ESTABLISHED, IKEv2, 739acec0ff8f1f84_i* 5de2e8d07fa3cec2_r
  local  'carol@strongswan.org' @ 192.168.0.3[4500]
  remote 'moon.strongswan.org' @ 192.168.0.2[4500]
  AES_GCM_16-256/PRF_HMAC_SHA2_512/CURVE_25519/KE1_KYBER_L3
  established 446s ago, reauth in 2669s
  Tunnel1: #1, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256
    installed 447s ago, rekeying in 496s, expires in 754s
    in  c2f347ac,    168 bytes,     2 packets,   152s ago
    out c55a612d,    168 bytes,     2 packets,   152s ago
    local  10.3.0.1/32
    remote 10.1.0.0/16

Rekeying of first CHILD SA

The rekeying of the first 'CHILD_SA' takes place automatically after the lifetime interval of 20 minutes. We can however force this update with the swanctl --rekey --child Tunnel1 command.

First, in order to capture the log of the rekey, we must open a new terminal window to monitor Carol's connection. We call this terminal window terminal-carol-log. To start the log, we use swanctl --log.

$ docker exec -ti carol /bin/bash
$ swanctl --log

Now, back in terminal-carol we can initiate the rekey:

carol# swanctl --rekey --child Tunnel1
rekey completed successfully

In terminal window terminal-carol-log we now see the rekey:

09[CFG] vici rekey CHILD_SA 'Tunnel1'
14[IKE] establishing CHILD_SA Tunnel1{3} reqid 1
14[ENC] generating CREATE_CHILD_SA request 6 [ N(REKEY_SA) SA No KE TSi TSr ]
14[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (389 bytes)
09[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (242 bytes)
09[ENC] parsed CREATE_CHILD_SA response 6 [ SA No KE TSi TSr N(ADD_KE) ]
09[CFG] selected proposal: ESP:AES_GCM_16_256/CURVE_25519/NO_EXT_SEQ/KE1_KYBER_L3

The second KE for the Kyber key now takes place:

09[ENC] generating IKE_FOLLOWUP_KE request 7 [ KE N(ADD_KE) ]
09[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (1258 bytes)
06[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (1153 bytes)
06[ENC] parsed IKE_FOLLOWUP_KE response 7 [ KE ]
06[IKE] inbound CHILD_SA Tunnel1{3} established with SPIs c26b805c_i cf0b9b25_o and TS 10.3.0.0/16 === 10.1.0.0/16
06[IKE] outbound CHILD_SA Tunnel1{3} established with SPIs c26b805c_i cf0b9b25_o and TS 10.3.0.0/16 === 10.1.0.0/16

The new CHILD_SA has been established..

06[IKE] closing CHILD_SA Tunnel1{2} with SPIs c8c40c81_i (0 bytes) c2bbffb8_o (0 bytes) and TS 10.3.0.0/16 === 10.1.0.0/16
06[IKE] sending DELETE for ESP CHILD_SA with SPI c8c40c81
06[ENC] generating INFORMATIONAL request 8 [ D ]
06[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (69 bytes)
07[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (69 bytes)
07[ENC] parsed INFORMATIONAL response 8 [ D ]
07[IKE] received DELETE for ESP CHILD_SA with SPI c2bbffb8
07[IKE] CHILD_SA closed

The old CHILD_SA has been deleted.

Rekeying of IKE SA

The rekeying of the first 'IKE_SA' takes place automatically after the rekey_time interval of 30 minutes. Again, however, we can force this rekey using the command swanctl --rekey --ike Tunnel1.

In terminal-carol we eneter the command:

carol# swanctl --rekey --ike Tunnel1
rekey completed successfully

In terminal window terminal-carol-log we now see the rekey:

14[CFG] vici rekey IKE_SA 'Tunnel1'
14[IKE] initiating IKE_SA Tunnel1[2] to 192.168.0.2
14[ENC] generating CREATE_CHILD_SA request 3 [ SA No KE ]
14[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (661 bytes)
12[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (198 bytes)
12[ENC] parsed CREATE_CHILD_SA response 3 [ SA No KE N(ADD_KE) ]
12[CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_512/CURVE_25519/KE1_KYBER_L3

The second KE for the Kyber key now takes place:

12[ENC] generating IKE_FOLLOWUP_KE request 4 [ KE N(ADD_KE) ]
12[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (1258 bytes)
08[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (1153 bytes)
08[ENC] parsed IKE_FOLLOWUP_KE response 4 [ KE ]
08[IKE] scheduling reauthentication in 3268s
08[IKE] maximum IKE_SA lifetime 3448s
08[IKE] IKE_SA Tunnel1[2] rekeyed between 192.168.0.3[carol.strongswan.org]...192.168.0.2[moon.strongswan.org]

The new IKE_SA has been established.

08[IKE] deleting IKE_SA Tunnel1[1] between 192.168.0.3[carol.strongswan.org]...192.168.0.2[moon.strongswan.org]
08[IKE] sending DELETE for IKE_SA Tunnel1[1]
08[ENC] generating INFORMATIONAL request 5 [ D ]
08[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (65 bytes)
08[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (57 bytes)
08[ENC] parsed INFORMATIONAL response 5 [ ]
08[IKE] IKE_SA deleted

The old IKE_SA has been deleted.

SA Status after Rekeying

If you're quick you can catch the deleted tunnel with a swanctl --list-sas command:

carol# swanctl --list-sas
Tunnel1: #3, ESTABLISHED, IKEv2, 769fedc951c1db8e_i* 7080ece2954ba603_r
  local  'carol.strongswan.org' @ 192.168.0.3[4500]
  remote 'moon.strongswan.org' @ 192.168.0.2[4500]
  AES_GCM_16-256/PRF_HMAC_SHA2_512/CURVE_25519/KE1_KYBER_L3
  established 14s ago, reauth in 2623s
  Tunnel1: #1, reqid 1, DELETED, TUNNEL, ESP:AES_GCM_16-256
    installed 518s ago, rekeying in 363s, expires in 682s
    in  c6eacaae,    168 bytes,     2 packets,    20s ago
    out cb43bc91,    168 bytes,     2 packets,    20s ago
    local  10.3.0.0/16
    remote 10.1.0.0/16
  Tunnel1: #2, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256/CURVE_25519/KE1_KYBER_L3
    installed 1s ago, rekeying in 883s, expires in 1199s
    in  c74c941d,      0 bytes,     0 packets
    out c9cb9458,      0 bytes,     0 packets
    local  10.3.0.0/16
    remote 10.1.0.0/16

Otherwise you will just see:

carol# swanctl --list-sas
Tunnel1: #3, ESTABLISHED, IKEv2, 769fedc951c1db8e_i* 7080ece2954ba603_r
  local  'carol.strongswan.org' @ 192.168.0.3[4500]
  remote 'moon.strongswan.org' @ 192.168.0.2[4500]
  AES_GCM_16-256/PRF_HMAC_SHA2_512/CURVE_25519/KE1_KYBER_L3
  established 31s ago, reauth in 2606s
  Tunnel1: #2, reqid 1, INSTALLED, TUNNEL, ESP:AES_GCM_16-256/CURVE_25519/KE1_KYBER_L3
    installed 18s ago, rekeying in 866s, expires in 1182s
    in  c74c941d,      0 bytes,     0 packets
    out c9cb9458,      0 bytes,     0 packets
    local  10.3.0.0/16
    remote 10.1.0.0/16

Other PQ KEMs

We now list some other cipher suites to try.

Quadruple KE - ECDH, Kyber, NTRU, SABER.

We can add the following connection configuration to Carol and Moon's ipsec.conf files to showcase four key exchanges ECDH, Kyber, NTRU, and SABER:

Carol:

conn Tunnel2
        left=192.168.0.3
        leftid=carol.strongswan.org
        leftsubnet=10.3.0.1/16
        #leftfirewall=yes
        right=192.168.0.2
        rightsubnet=10.1.0.0/16
        rightid=moon.strongswan.org
        auto=add
        ike=aes256gcm16-sha512-x25519-ke1_kyber3-ke2_ntrup3-ke3_saber3!
        esp=aes256gcm16-sha512-x25519-ke1_kyber3-ke2_ntrup3-ke3_saber3!

Moon:

conn Tunnel2
        left=192.168.0.2
        leftsubnet=10.1.0.0/16
        leftid=moon.strongswan.org
        #leftfirewall=yes
        right=192.168.0.3
        rightsubnet=10.3.0.0/16
        rightid=carol.strongswan.org
        auto=add
        ike=aes256gcm16-sha512-x25519-ke1_kyber3-ke2_ntrup3-ke3_saber3!
        esp=aes256gcm16-sha512-x25519-ke1_kyber3-ke2_ntrup3-ke3_saber3!

(The ! after the cipher suite enforces the use of this scheme and no others).

Then ipsec up Tunnel2 will produce the log:

08[IKE] initiating IKE_SA Tunnel2[1] to 192.168.0.2
08[ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(IKE_INT_SUP) V ]
08[NET] sending packet: from 192.168.0.3[500] to 192.168.0.2[500] (284 bytes)
10[NET] received packet: from 192.168.0.2[500] to 192.168.0.3[500] (292 bytes)
10[ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(CHDLESS_SUP) N(IKE_INT_SUP) N(MULT_AUTH) V ]
10[IKE] received strongSwan vendor ID
10[CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_512/CURVE_25519/KE1_KYBER_L3/KE2_NTRU_HPS_L3/KE3_SABER_L3

Kyber KE:

10[ENC] generating IKE_INTERMEDIATE request 1 [ KE ]
10[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (1249 bytes)
15[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (1153 bytes)
15[ENC] parsed IKE_INTERMEDIATE response 1 [ KE ]

NTRU KE:

15[ENC] generating IKE_INTERMEDIATE request 2 [ KE ]
15[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (995 bytes)
05[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (995 bytes)
05[ENC] parsed IKE_INTERMEDIATE response 2 [ KE ]

SABER KE:

05[ENC] generating IKE_INTERMEDIATE request 3 [ KE ]
05[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (1057 bytes)
12[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (1153 bytes)
12[ENC] parsed IKE_INTERMEDIATE response 3 [ KE ]
12[IKE] authentication of 'carol.strongswan.org' (myself) with pre-shared key
12[IKE] establishing CHILD_SA Tunnel2{1}
12[ENC] generating IKE_AUTH request 4 [ IDi N(INIT_CONTACT) IDr AUTH SA TSi TSr N(MOBIKE_SUP) N(ADD_4_ADDR) N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ]
12[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (320 bytes)
05[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (272 bytes)
05[ENC] parsed IKE_AUTH response 4 [ IDr AUTH SA TSi TSr N(AUTH_LFT) N(MOBIKE_SUP) N(ADD_4_ADDR) ]
05[IKE] authentication of 'moon.strongswan.org' with pre-shared key successful
05[IKE] IKE_SA Tunnel2[1] established between 192.168.0.3[carol.strongswan.org]...192.168.0.2[moon.strongswan.org]
05[IKE] scheduling reauthentication in 3242s
05[IKE] maximum IKE_SA lifetime 3422s
05[CFG] selected proposal: ESP:AES_GCM_16_256/NO_EXT_SEQ
05[IKE] CHILD_SA Tunnel2{1} established with SPIs cef9ea8c_i c39544a8_o and TS 10.3.0.0/16 === 10.1.0.0/16
05[IKE] received AUTH_LIFETIME of 3320s, scheduling reauthentication in 3140s

Triple Alternate KE - DH, Frodo, SIKE.

We can add the following connection configuration to Carol and Moon's ipsec.conf files to showcase three key exchanges 3072bit DH, Frodo, and SIKE: Carol:

conn Tunnel3
        left=192.168.0.3
        leftid=carol.strongswan.org
        leftsubnet=10.3.0.1/16
        #leftfirewall=yes
        right=192.168.0.2
        rightsubnet=10.1.0.0/16
        rightid=moon.strongswan.org
        auto=add
        ike=aes256gcm16-sha512-modp3072-ke1_frodoa3-ke2_sike3!
        esp=aes256gcm16-sha512-modp3072-ke1_frodoa3-ke2_sike3!

Moon:

conn Tunnel3
        left=192.168.0.2
        leftsubnet=10.1.0.0/16
        leftid=moon.strongswan.org
        #leftfirewall=yes
        right=192.168.0.3
        rightsubnet=10.3.0.0/16
        rightid=carol.strongswan.org
        auto=add
        ike=aes256gcm16-sha512-modp3072-ke1_frodoa3-ke2_sike3!
        esp=aes256gcm16-sha512-modp3072-ke1_frodoa3-ke2_sike3!

These key exchanges are large, so we see fragmentation in action. We use ipsec up Tunnel3 to bring up the connection. This will produce the log:

08[CFG] received stroke: initiate 'Tunnel3'
09[IKE] initiating IKE_SA Tunnel3[1] to 192.168.0.2
09[ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) N(IKE_INT_SUP) V ]
09[NET] sending packet: from 192.168.0.3[500] to 192.168.0.2[500] (628 bytes)
12[NET] received packet: from 192.168.0.2[500] to 192.168.0.3[500] (636 bytes)
12[ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(CHDLESS_SUP) N(IKE_INT_SUP) N(MULT_AUTH) V ]

The KE payload in the IKE_SA_INIT message exchange transports the public factors of the 3072 bit prime Diffie-Hellman group.

12[IKE] received strongSwan vendor ID
12[CFG] selected proposal: IKE:AES_GCM_16_256/PRF_HMAC_SHA2_512/MODP_3072/KE1_FRODO_AES_L3/KE2_SIKE_L3
12[ENC] generating IKE_INTERMEDIATE request 1 [ KE ]
12[ENC] splitting IKE message (15697 bytes) into 12 fragments
12[ENC] generating IKE_INTERMEDIATE request 1 [ EF(1/12) ]
12[ENC] generating IKE_INTERMEDIATE request 1 [ EF(2/12) ]
12[ENC] generating IKE_INTERMEDIATE request 1 [ EF(3/12) ]
12[ENC] generating IKE_INTERMEDIATE request 1 [ EF(4/12) ]
12[ENC] generating IKE_INTERMEDIATE request 1 [ EF(5/12) ]
12[ENC] generating IKE_INTERMEDIATE request 1 [ EF(6/12) ]
12[ENC] generating IKE_INTERMEDIATE request 1 [ EF(7/12) ]
12[ENC] generating IKE_INTERMEDIATE request 1 [ EF(8/12) ]
12[ENC] generating IKE_INTERMEDIATE request 1 [ EF(9/12) ]
12[ENC] generating IKE_INTERMEDIATE request 1 [ EF(10/12) ]
12[ENC] generating IKE_INTERMEDIATE request 1 [ EF(11/12) ]
12[ENC] generating IKE_INTERMEDIATE request 1 [ EF(12/12) ]
12[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (1448 bytes)
12[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (1448 bytes)
12[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (1448 bytes)
12[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (1448 bytes)
12[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (1448 bytes)
12[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (1448 bytes)
12[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (1448 bytes)
12[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (1448 bytes)
12[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (1448 bytes)
12[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (1448 bytes)
12[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (1448 bytes)
12[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (444 bytes)
07[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (1448 bytes)

The large FrodoKEM public key sent by the initiator via the IKE_INTERMEDIATE message has to be split into 12 IKEv2 fragments.

07[ENC] parsed IKE_INTERMEDIATE response 1 [ EF(1/12) ]
07[ENC] received fragment #1 of 12, waiting for complete IKE message
07[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (1448 bytes)
07[ENC] parsed IKE_INTERMEDIATE response 1 [ EF(2/12) ]
07[ENC] received fragment #2 of 12, waiting for complete IKE message
07[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (1448 bytes)
07[ENC] parsed IKE_INTERMEDIATE response 1 [ EF(3/12) ]
07[ENC] received fragment #3 of 12, waiting for complete IKE message
07[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (1448 bytes)
07[ENC] parsed IKE_INTERMEDIATE response 1 [ EF(4/12) ]
07[ENC] received fragment #4 of 12, waiting for complete IKE message
07[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (1448 bytes)
07[ENC] parsed IKE_INTERMEDIATE response 1 [ EF(9/12) ]
07[ENC] received fragment #9 of 12, waiting for complete IKE message
07[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (1448 bytes)
07[ENC] parsed IKE_INTERMEDIATE response 1 [ EF(10/12) ]
07[ENC] received fragment #10 of 12, waiting for complete IKE message
07[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (1448 bytes)
07[ENC] parsed IKE_INTERMEDIATE response 1 [ EF(11/12) ]
07[ENC] received fragment #11 of 12, waiting for complete IKE message
05[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (1448 bytes)
05[ENC] parsed IKE_INTERMEDIATE response 1 [ EF(8/12) ]
05[ENC] received fragment #8 of 12, waiting for complete IKE message
10[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (1448 bytes)
10[ENC] parsed IKE_INTERMEDIATE response 1 [ EF(5/12) ]
10[ENC] received fragment #5 of 12, waiting for complete IKE message
14[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (1448 bytes)
14[ENC] parsed IKE_INTERMEDIATE response 1 [ EF(6/12) ]
14[ENC] received fragment #6 of 12, waiting for complete IKE message
09[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (1448 bytes)
09[ENC] parsed IKE_INTERMEDIATE response 1 [ EF(7/12) ]
11[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (556 bytes)
11[ENC] parsed IKE_INTERMEDIATE response 1 [ EF(12/12) ]
11[ENC] received fragment #12 of 12, reassembled fragmented IKE message (15809 bytes)
11[ENC] parsed IKE_INTERMEDIATE response 1 [ KE ]
09[ENC] received fragment #7 of 12, waiting for complete IKE message

The encrypted session secret sent by the responder has to be fragmented into 12 parts as well. The FRODOKEM key exchange defined as ADDITIONAL_KEY_EXCHANGE_1 has been completed. We then see the SIKE KEM:

11[ENC] generating IKE_INTERMEDIATE request 2 [ KE ]
11[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (527 bytes)
10[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (551 bytes)
10[ENC] parsed IKE_INTERMEDIATE response 2 [ KE ]
10[IKE] authentication of 'carol.strongswan.org' (myself) with pre-shared key
10[IKE] establishing CHILD_SA Tunnel3{1}
10[ENC] generating IKE_AUTH request 3 [ IDi N(INIT_CONTACT) IDr AUTH SA TSi TSr N(MOBIKE_SUP) N(ADD_4_ADDR) N(MULT_AUTH) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ]
10[NET] sending packet: from 192.168.0.3[4500] to 192.168.0.2[4500] (320 bytes)
11[NET] received packet: from 192.168.0.2[4500] to 192.168.0.3[4500] (272 bytes)
11[ENC] parsed IKE_AUTH response 3 [ IDr AUTH SA TSi TSr N(AUTH_LFT) N(MOBIKE_SUP) N(ADD_4_ADDR) ]
11[IKE] authentication of 'moon.strongswan.org' with pre-shared key successful
11[IKE] IKE_SA Tunnel3[1] established between 192.168.0.3[carol.strongswan.org]...192.168.0.2[moon.strongswan.org]
11[IKE] scheduling reauthentication in 3328s
11[IKE] maximum IKE_SA lifetime 3508s
11[CFG] selected proposal: ESP:AES_GCM_16_256/NO_EXT_SEQ
11[IKE] CHILD_SA Tunnel3{1} established with SPIs ca8cf552_i c801c1e0_o and TS 10.3.0.0/16 === 10.1.0.0/16
11[IKE] received AUTH_LIFETIME of 3246s, scheduling reauthentication in 3066s
11[IKE] peer supports MOBIKE

About

Docker Image for testing pq-strongswan

Resources

Readme
Activity

Stars

0 stars

Watchers

2 watching

Forks

0 forks
Report repository

Releases

No releases published

Packages

No packages published

Languages