Datablox

Assemble big data computations from blocks.

This is still under development.

Setup

In order to run datablox, ZeroMQ must be installed in the system.

datablox depends on the following python modules:

• zmq python bindings
• Engage

Individual blox depend on several others:

• pymongo 2.0.1 for Mongodb
• sunburnt 0.5 for Solr (sunburnt in turn requires httplib2 and lxml)

See the .meta file in the block's subdirectory (under blox/) for details on a given block.

Running

There are two main components to datablox: loader.py and care_taker.py

Before running loader or care_taker, please set the following environment variable in each shell:

export BLOXPATH=path_to_datablox/blox

Loader requires a json configuration file which specifies the topology. Some configuration files are present in examples directory. Loader takes the json configuration file and a list of ip-addresses (of nodes in which datablox can run) and distributes the blocks described in the configuration among the different nodes.

For example, to run example.json in the local machine, the command would be (assuming it is being run in the datablox project directory):

python datablox_framework/datablox_framework/loader.py examples/example.json 127.0.0.1

To run it on machines with ip-addresses 10.0.0.1, 10.0.0.2, 10.0.0.3:

python datablox_framework/datablox_framework/loader.py examples/example.json 10.0.0.1 10.0.0.2 10.0.0.3

The care_taker process must be running on each of the nodes given to loader. If the process is not running on any of the nodes, loader will wait until it is started. care-taker.py, currently, must be run in the datablox_framework directory where it is present:

cd datablox_framework/datablox_framework/ python care_taker.py

To ensure the system is setup correctly, please run the example mentioned above in the local machine. This should print all the files in the datablox_framework directory along with various attributes of the files. Note that care_taker process keeps running even after the master declares the run is complete and it is ok to quit. This is so that when you change the configuration file, you don't have to remember to start the care_taker process in each node.

Other examples to try are:

• anagram.json - prints all anagrams of a word listed in the configuration file
• counter.json - counts numbers
• categorize.json - takes a list of files and categorizes them based on their file extension

Debugging

The best way to test a configuration is to run it on the local machine first before deploying it to a cluster.

During the run if either the loader or any of the care_takers displays any exceptions and you want to restart, you will have to kill loader, care_takers and any blocks that may be running in any of the nodes. An easy way to do that would be to kill all python processes in all the nodes with:

killall python

Note that this will kill other python processes unrelated to datablox.

Building and Installing with Engage ============================ Datablox can be installed via the Engage deployment platform (http://github.com/genforma/engage). This is accomplished by building an Engage distribution that includes Datablox as an extension. Engage can then install the Datablox framework and start the caretaker process. When running under Engage, Datablox will automatically install any dependent components needed by individual blocks.

Building on Ubuntu

Here are the steps to build Datablox with Engage on Ubuntu:

sudo apt-get update
# engage dependencies
sudo apt-get install git-core g++ ocaml zlib1g-dev python-dev python-crypto python-virtualenv make
git clone git://github.com/mpi-sws-rse/datablox.git
cd ./datablox
make all

Building on MacOSX

Datablox is currently supported on MacOSX 10.5 and 10.6. As prerequisites, you need to have the following software installed on your mac: * Python 2.6 or 2.7 * Apple's XCode (to get g++) * OCaml (http://caml.inria.fr) * MacPorts (http://www.macports.org) * The following Python packages:

• virtualenv (http://pypi.python.org/pypi/virtualenv)
• setuptools (http://pypi.python.org/pypi/setuptools)
• pycrypto (http://pypi.python.org/pypi/pycrypto)

If you are running MacOSX 10.5 (Leopard), the version of Python included with the OS is too old, and you will have to install a separate local copy of Python 2.6 or Python 2.7. Either way, we recommend installing MacPorts and using the MacPorts Python package (python27).

If you use MacPorts, you can get pycrypto and ocaml setup with minimal pain by installing the associated ports: py27-crypto and ocaml, respectively.

With the prerequisites installed, you can now build as follows:

git clone git://github.com/mpi-sws-rse/datablox.git
cd ./datablox
make all

Testing

If you wish to test datablox after building it, you can do so by running the following:

cd ./datablox
make test

This will install Datablox to ~/apps, run an example topology (datablox/examples/file_map_reduce.json), and then shut down the Datablox caretaker.

Installing

Assuming you start in the directory above your Datablox source tree and have already built it, the following will install Datablox:

cd ./datablox/engage
./install_datablox.py <deployment_home>

where <deployment_home> is the target directory for your installation. During the installation, you will be asked to define a master password. Unless you are running as root, you will also be asked for the sudo password. Root access is needed to install some of the components (e.g. zeromq). The Datablox master script will be installed to <deployment_home>/python/bin/datablox-master.

The installation will also start the Datablox caretaker process. To start and stop it, you can use Engage's svcctl utility. To do this, run:

<deployment_home>/engage/bin/svcctl <command>

where <command> is one of: start, stop, or status.

Documentation

See docs folder for the description of configuration language. blox_meta folder contains documentation and requirements for individual blocks.

Copyright 2011, 2012 by MPI-SWS and genForma Corporation