TAP-Windows driver (NDIS 6)

This is an NDIS 6.20 implementation of the TAP-Windows driver, used by OpenVPN and other apps. NDIS 6.20 drivers can run on Windows 7 or higher.

Build

To build, the following prerequisites are required:

• Python 2.7

• Microsoft Windows 10 EWDK (Enterprise Windows Driver Kit)

  • WDK works too, but

    • the tool paths are all different
    • the environment script is the one for the Developer Command Prompt for VS 2017

• Source code directory of devcon sample from WDK (optional)

  • https://github.com/Microsoft/Windows-driver-samples/ setup/devcon

• Windows code signing certificate
• Git (not strictly required, but useful for running commands using bundled bash shell)
• MakeNSIS (optional)
• Prebuilt tapinstall.exe binaries (optional)

Make sure you add Python's install directory (usually c:\python27) to the PATH environment variable.

These instructions have been tested on Windows 10 using Windows' CMD.exe.

View build script options:

$ python buildtap.py
Usage: buildtap.py [options]

Options:
  -h, --help         show this help message and exit
  -s SRC, --src=SRC  TAP-Windows top-level directory, default=<CWD>
  --ti=TAPINSTALL    tapinstall (i.e. devcon) directory (optional)
  -d, --debug        enable debug build
  -c, --clean        do an nmake clean before build
  -b, --build        build TAP-Windows and possibly tapinstall (add -c to
                     clean before build)
  --sign         sign the driver files (disabled by default)
  -p, --package      generate an NSIS installer from the compiled files
  --cert=CERT        Common name of code signing certificate, default=openvpn
  --crosscert=CERT   The cross-certificate file to use, default=MSCV-
                     VSClass3.cer
  --timestamp=URL    Timestamp URL to use, default=http://timestamp.verisign.c
                     om/scripts/timstamp.dll
  -a, --oas          Build for OpenVPN Access Server clients

Edit version.m4 and paths.py as necessary then build:

$ python buildtap.py -b

On successful completion, all build products will be placed in the "dist" directory as well as tap6.tar.gz. The NSIS installer package will be placed to the build root directory.

Note that due to the strict driver signing requirements in Windows 10 you need an EV certificate to sign the driver files. These EV certificates may be stored inside a hardware device, which makes fully automated signing process difficult, dangerous or impossible. Eventually the signing process will become even more involved, with drivers having to be submitted to the Windows Hardware Developer Center Dashboard portal. Therefore, by default, this buildsystem no longer signs any files. You can revert to the old behavior by using the --sign parameter.

Building tapinstall (optional)

The build system supports building tapinstall.exe (a.k.a. devcon.exe), but the default behavior is to reuse pre-built executables. To make sure the buildsystem finds the executables create the following directory structure under tap-windows6 directory: :: tapinstall ├── Release │ └── devcon.exe └── x64 └── Release └── devcon.exe

This structure is equal to what building tapinstall would create. Call buildtap.py with "--ti=tapinstall".

Please note that the NSIS packaging (-p) step will fail if you don't have tapinstall.exe available. Also don't use the "-c" flag or the above directories will get wiped before MakeNSIS is able to find them.

Install/Update/Remove

The driver can be installed using a command-line tool, tapinstall.exe, which is bundled with OpenVPN and tap-windows installers. Note that in some versions of OpenVPN tapinstall.exe is called devcon.exe. To install, update or remove the tap-windows NDIS 6 driver follow these steps:

• place tapinstall.exe/devcon.exe to your PATH
• open an Administrator shell
• cd to dist
• cd to amd64 or i386 depending on your system's processor architecture.

Install:

$ tapinstall install OemVista.inf TAP0901

Update:

$ tapinstall update OemVista.inf TAP0901

Remove:

$ tapinstall remove TAP0901

Notes on proxies

It is possible to build tap-windows6 without connectivity to the Internet but any attempt to timestamp the driver will fail. For this reason configure your outbound proxy server before starting the build. Note that the command prompt also needs to be restarted to make use of new proxy settings.

Notes on Authenticode signatures

Recent Windows versions such as Windows 10 are fairly picky about the Authenticode signatures of kernel-mode drivers. In addition making older Windows versions such as Vista play along with signatures that Windows 10 accepts can be rather challenging. A good starting point on this topic is the building tap-windows6 page on the OpenVPN community wiki. As that page points out, having two completely separate Authenticode signatures may be the only reasonable option. Fortunately there is a tool, Sign-Tap6, which can be used to append secondary signatures to the tap-windows6 driver or to handle the entire signing process if necessary.

License

See the file COPYING.