Skip to content

A platform agnostic driver to interface with the HX711 (load cell amplifier and ADC)

License

Apache-2.0, MIT licenses found

Licenses found

Apache-2.0
LICENSE-APACHE
MIT
LICENSE-MIT
Notifications You must be signed in to change notification settings

jonas-hagen/hx711

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

32 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Build Status crates.io docs.rs

HX711

A platform agnostic driver to interface with the HX711 (load cell amplifier and 24 bit ADC)

What works

  • Resetting the chip
  • Setting the mode (gain and channel)
  • Reading conversion results (blocking and non blocking)
  • Entering low-power mode and wake up

Tested with STM32F103. Pull requests for other hardware welcome!

Because the interface works by toggling of GPIO pins, some care has to be taken. See below.

Examples

See here: https://github.com/jonas-hagen/hx711-examples

Incomplete appetizer:

let mut val: i32 = 0;

let dout = gpioa.pa6.into_floating_input(&mut gpioa.crl);
let pd_sck = gpioa.pa7.into_push_pull_output(&mut gpioa.crl);

let mut hx711 = Hx711::new(Delay::new(cp.SYST, clocks), dout, pd_sck).into_ok();

// Obtain the tara value
writeln!(tx, "Obtaining tara ...").unwrap();
const N: i32 = 8;
for _ in 0..N {
    val += block!(hx711.retrieve()).into_ok(); // or unwrap, see features below
}
let tara = val / N;
writeln!(tx, "Tara:   {}", tara).unwrap();

Optional features

never_type

The never_type feature can optionally be enabled when using nightly rust.

For some HALs, the digital input and output pins can never fail. When using the driver with such a crate, one can use .into_ok() on all results instead of .unwrap() or .expect().

Example with e.g. STM32f1xx embedded hal:

// Without never_type (stable rust):
// We know that this never fails
let weight = block!(hx711.retrieve()).unwrap())

// With never_type (nightly rust)
// It is obvious that this is always ok
let weight = block!(hx711.retrieve()).into_ok()

Bit-banging and delays

The protocol is implemented using the GPIO interface because the HX711 needs a specific number of clock cycles to set the operation mode (25, 26 or 27 cycles). So, beware of interrupts during readout! The delays between state changes for clocking only need to be 0.1 µs (per HX711 specs), allowing to clock through all 24 cycles in approximately 5 µs. But the current embedded HAL does not support delays smaller than 1 µs (see embedded-hal #63 for the discussion). With a delay of 1 µs, the readout takes at least 48 µs. Depending on clock speed of the device, this increases to 300 µs in total (tested with STM32F103 at 8 MHz) or more. In a control loop, this might be undesirable and keeping the time closer to the 5 µs is compelling.

To tweak the performance, an alternative implementation of the delay trait can be used. For example:

use embedded_hal::blocking::delay::DelayUs;

pub struct BusyDelay {
    nops_per_us: u32,
}

impl BusyDelay {
    pub fn new(loops_per_us: u32) -> Self {
        BusyDelay{loops_per_us: loops_per_us as u32}
    }
}

impl DelayUs<u32> for BusyDelay {
    fn delay_us(&mut self, us: u32) {
        for _ in 0..us {
            cortex_m::asm::delay(self.nops_per_us)
        }
    }
}

Or even:

pub struct NoDelay();

impl NoDelay {
    pub fn new() -> Self {
        NoDelay()
    }
}

impl DelayUs<u32> for NoDelay {
    fn delay_us(&mut self, _us: u32) {
    }
}

Some random notes on this topic:

  • Maybe add a nodelay feature?
  • It would be interesting to try to use SPI with MOSI as clock and MISO as data line, not using the actual SPI clock.
  • How to make this work on linux? Any ideas?

Changelog

v0.6

  • Update nb requirement to 1.0.0
  • Add get_mode function. Thanks m-ou-se!

v0.5

  • Hide usage of never_type behind feature for usage on stable rust

v0.4

  • Add delays.
  • Add enable() and disable() functions to enter and leave low-power mode.

v0.3

  • Add custom error type. Some HALs implement the digital interface in a way that it cannot fail. In this case, the Error type of Input and Output pins are Infallible. With a custom Error type we can allow the use of .into_ok() when using such HAL implementations.

v0.2

  • Update to embedded-hal digital pin v2 API. Thanks to mmou!

v0.1

  • First version.

License

Licensed under either of

at your option.

About

A platform agnostic driver to interface with the HX711 (load cell amplifier and ADC)

Resources

License

Apache-2.0, MIT licenses found

Licenses found

Apache-2.0
LICENSE-APACHE
MIT
LICENSE-MIT

Stars

Watchers

Forks

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •