Skip to content

Patches and instructions for booting Fedora 21 on the Utilite

License

Notifications You must be signed in to change notification settings

jp-bennett/utilite

Repository files navigation

utilite

Patches and instructions for booting Fedora 21 on the Utilite

!! This document does not display correctly in the fancy github viewer. Some of the escape slashes are removed. Either view it raw or use git to check it out and use an editor. setenv catcat does not work if copied from the github viewer.

Notice: There may be a problem with setting the root password from the serial console on a graphical image. If this happens, you may need to mount the sd card on a desktop and add the hash to /etc/shadow, and or do the same for the sata drive from the sd card.

This is not for the faint of heart. I believe that a serial connection is required for the initial setup. I am hopeful that the Fedora 21 stable Arm image will be much easier to work with. There is currently a bit of a convaluted bootstrapping process to get to a working system. These instructions are tested for the pro version only. I do have the other two Utilite models, but so far have only worked with the Pro.

First step is to grab the Fedora image and copy to your SD card. Instructions here: http://fedoraproject.org/wiki/Architectures/ARM/F21_Alpha/Installation

I used this image:

http://download.fedoraproject.org/pub/fedora/linux/releases/test/21-Beta/Images/armhfp/Fedora-KDE-armhfp-21_Beta-4-sda.raw.xz

My dd command looks like this, for reference: xzcat Fedora-KDE-armhfp-21_Beta-4-sda.raw.xz | sudo dd of=/dev/sdg

After DD'ing the image, Remove and re-insert the sdcard, and use something like gparted to grow the root partition to fill the rest of the sd card. If you intend to install Fedora to the sata drive, then mount the enlarged root partion and copy the Fedora image file to it for later use.

Next we need to build our new u-boot image. Grab the 2014.10 u-boot sources (ftp://ftp.denx.de/pub/u-boot/u-boot-2014.10.tar.bz2) and apply the utilite-uboot.patch. If you are not building this on an arm machine, you will need a cross compiling toolchain. I used gcc-arm-linux-gnu available in Fedora. We basically follow the instructions here: http://compulab.co.il/utilite-computer/wiki/index.php/Utilite_U-Boot_firmware.

export ARCH=arm

export CROSS_COMPILE=arm-linux-gnu-

make mrproper

make cm_fx6_config && make

dd if=/dev/zero count=500 bs=1K | tr '\000' '\377' > cm-fx6-firmware

dd if=SPL of=cm-fx6-firmware bs=1K seek=1 conv=notrunc && dd if=u-boot.img of=cm-fx6-firmware bs=1K seek=64 conv=notrunc

Once built, dd the firmware to the Fedora sd card. Command will need to look like this:

sudo dd if=cm-fx6-firmware of=/dev/sdg bs=1K skip=1 seek=1 oflag=dsync

Replace /dev/sdg with the path to the sd card.

At this point, pop the sdcard into the utilite and power it up. You should see the boot attempt and then have a prompt. On this first boot, These commands should get you started.

env default -a

boot

setenv catcat setenv catout;'setenv catX setenv catout '\\\"''$$catin'\\\"''' ; run catX

run k1

run c9

setenv u_dtb imx6q-cm-fx6.dtb

setenv u_devpart 2:1

boot

This should boot into Fedora running on the SD card.

If you are installing to an internal sata drive, go ahead and dd the image to the sata drive, just like above.

To boot into sata instead of the sd card, first interrupt the u-boot auto boot to prevent the boot.scr on the sdcard from running. Then, the boot commands for sata are:

sata init

run loadsatabootscript

run satabootscript

setenv catcat setenv catout;'setenv catX setenv catout '\\\"''$$catin'\\\"''' ; run catX

run k1

run c9

setenv u_dtb imx6q-cm-fx6.dtb

setenv u_root /dev/sda3

setenv u_iodevs sata

boot

Next we update the boot script builder. Copy a-b-c patch to /etc/ and run "patch -p1 < a-b-c.patch". Run a-b-c. If you are booting from the sd-card, it should autoboot without having to muck around in u-boot. If booting from the sata drive, we need to update u-boot on the spi first, but that requires the new kernel.

Next up we compile the new kernel. I am using 3.18.0-0-rc1. A few tweaks might be in order for newer kernels.

I am assuming that you will be building on a Fedora x86_64 machine. We'll follow this guide: https://fedoraproject.org/wiki/Building_a_custom_kernel. After installing the src.rpm, cp the kernel patch into ~/rpmbuild/SOURCES/ which will overwrite the fedora patch for the utilite. The sound driver requires a .config change. In the file ~/rpmbuild/SOURCES/config-armv7, find the line: CONFIG_SND_SOC_IMX_WM8962=m Under that line, add:

CONFIG_SND_SOC_IMX_WM8731=m

Now you're ready to build. The command is:

rpmbuild -bb --with cross --target=armv7hl --without perf --without pae ~/rpmbuild/SPECS/kernel.spec

This takes about 45 minutes on my machine. Next, copy the kernel, kernel-core, kernel-modules, and kernel-modules-extra rpms from the RPMS folder to the utilite. I have been using scp to copy it across.

Install these 4 packages, and reboot. Your utilite should come up and be ready for action.

To update u-boot on the spi chip, do a yum install mtd-utils, and them modprobe m25p80. It's easiest to use the compulab supplied update script. http://utilite-computer.com/download/utilite/u-boot/utilite-updater.tar.bz2

Copy this to the utilite and extract the files. Replace the bundled firmware file with the you compiled earlier. Run it and let it do the update. At this point, you should be able to boot the sata drive without an sd-card.

Notice: I have quite possibly overlooked something. Any additions or corrections are welcome.

~Jonathan Bennett

About

Patches and instructions for booting Fedora 21 on the Utilite

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published