Skip to content

klownfish/fjalar_firmware

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

13 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Fjalar firmware

Overview

This repository contains code to support a flight controller. Currently, the only supported hardware is the Fjalar flight controller (as the name suggests) but one of the goals of this project is portability.

sub-projects

The codebase is split into three projects, the dashboard, the handheld tracker firmware and the flight firmware. Ideally these should be split into separate repositories eventually.

Both firmwares use zephyr and are located in the /application/ folder.

dependencies

Zephyr SDK

Building the software is most easily done with the Zephyr SDK. This is separate thing from the Zephyr RTOS/library and is just a bundle with tools for compiling, linking and so on. Please refer to the zephyr docs on how to install.

Python

It is recommended to set up a Python virtual environment for the repository. A virtual environment is basically a sandbox isolate each project and prevent collisions between library versions. The project can be built without this but there will most likely be unexpected issues a few months down the line.

Configuring one can be as simple as running python -m venv .venv. Every time you want to build something run source .venv/bin/activate to activate and enter the virtual environment.

West & Zephyr

The project is built and managed using West. West will automatically fetch everything Zephyr related (other than the SDK).

important there is a bug in the used version of Zephyr. Before installing anything in the virtual environment you need to install a specific version of pillow pip install pillow==9.4.0.

West can be installed through pip pip install west. (enable your virtual environment first if you have one). Then run west update in the root of this repository to make West fetch Zephyr RTOS and all required dependencies.

Flashing

Tracker

The tracker can be built and flashed using west application/tracker -b t_echo -p auto. Then you need to manually copy the firmware to the t-echo. Connect it over USB, double tap the reset button to enter the bootloader and mount it as a drive. Copy build/zephyr/zephyr.uf2 to the new drive to flash.

Flight controller

Run west build application/flight_controller/ -p auto -b fjalar -t flash to build and flash.

Native simulation

Both the tracker and flight firmware supports compiling for native_sim_64 allowing you to run it natively. This only works on linux, if you are on Windows try using WSL 2 (WSL 1 doesn't work).

To run natively change the board to -b native_sim_64 and use -t run instead of -t flash

About

Flight controller firmware

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages