Skip to content

lookout/terraform-google-address

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

52 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

This terraform module provides the means to permanently reserve an IP address available to Google Cloud Platform (GCP) resources, and optionally create forward and reverse entries within Google Cloud DNS. The intent is to provide an address resource which exists independent of the lifecycle of the resources that require the address.

Compatibility

This module is meant for use with Terraform 0.13. If you haven't upgraded and need a Terraform 0.12.x-compatible version of this module, the last released version intended for Terraform 0.12.x is v2.1.1.

Examples without DNS

Examples are provided in the examples folder, but to simply reserve IP addresses on a subnetwork without registering them in DNS refer to the following example:

module "address-fe" {
  source  = "terraform-google-modules/address/google"
  version = "0.1.0"

  project_id = "gcp-network"
  region = "us-west1"

  subnetwork = "projects/gcp-network/regions/us-west1/subnetworks/dev-us-west1-dynamic"

  names = [
    "gusw1-dev-fooapp-fe-0001-a-001-ip",
    "gusw1-dev-fooapp-fe-0001-a-002-ip",
    "gusw1-dev-fooapp-fe-0001-a-003-ip"
  ]
}

Then perform the following commands on the root folder:

  • terraform init to get the plugins
  • terraform plan to see the infrastructure plan
  • terraform apply to apply the infrastructure build
  • terraform destroy to destroy the built infrastructure

An addresses output has been provided as the list of IP addresses that were reserved by GCP. Because the addresses input variable was not specified, GCP has reserved the next available IP addresses from the subnetwork provided. The number of IP addresses reserved is equal to the length of the names input variable, so size that list accordingly.

If you would prefer to provide the specific IP addresses to be reserved, that can be accomplished with the addresses input variable:

module "address-fe" {
  source  = "terraform-google-modules/address/google"
  version = "0.1.0"

  subnetwork = "projects/gcp-network/regions/us-west1/subnetworks/dev-us-west1-dynamic"

  names = [
    "gusw1-dev-fooapp-fe-0001-a-001-ip",
    "gusw1-dev-fooapp-fe-0001-a-002-ip",
    "gusw1-dev-fooapp-fe-0001-a-003-ip"
  ]

  addresses = [
    "10.11.0.10",
    "10.11.0.11",
    "10.11.0.12"
  ]
}

Note that the IP addresses must not be reserved and must fall within the range of the provided subnetwork.

External IP address

External IP addresses can be reserved by setting the global input var to true and omitting the subnetwork:

module "address-fe" {
  source  = "terraform-google-modules/address/google"
  version = "0.1.0"

  names  = [ "external-facing-ip"]
  global = true
}

DNS Examples

Optionally, the IP addresses you reserve can be registered in Google Cloud DNS by providing information on the project hosting the Cloud DNS zone, the managed zone name, the domain registered with Cloud DNS, and setting the enable_gcp_dns feature flag to true:

module "address-fe" {
  source  = "terraform-google-modules/address/google"
  version = "0.1.0"

  subnetwork           = "projects/gcp-network/regions/us-west1/subnetworks/dev-us-west1-dynamic"
  enable_gcp_dns       = true
  gcp_dns_project      = "gcp-dns"
  gcp_dns_domain       = "example.com"
  gcp_dns_managed_zone = "nonprod-dns-zone"

  names = [
    "gusw1-dev-fooapp-fe-0001-a-001-ip",
    "gusw1-dev-fooapp-fe-0001-a-002-ip",
    "gusw1-dev-fooapp-fe-0001-a-003-ip"
  ]

  dns_short_names = [
    "gusw1-dev-fooapp-fe-0001-a-001",
    "gusw1-dev-fooapp-fe-0001-a-002",
    "gusw1-dev-fooapp-fe-0001-a-003"
  ]
}

Reverse DNS

The module also supports the ability to register reverse DNS entries within their own zone by setting the enable_gcp_ptr feature flag to true and specifying the zone with the gcp_dns_reverse_zone input variable:

module "address-fe" {
  source  = "terraform-google-modules/address/google"
  version = "0.1.0"

  subnetwork           = "projects/gcp-network/regions/us-west1/subnetworks/dev-us-west1-dynamic"
  enable_gcp_dns       = true
  enable_gcp_ptr       = true
  gcp_dns_project      = "gcp-dns"
  gcp_dns_domain       = "example.com"
  gcp_dns_managed_zone = "nonprod-dns-zone"
  gcp_dns_reverse_zone = "nonprod-dns-reverse-zone"

  names = [
    "gusw1-dev-fooapp-fe-0001-a-001-ip",
    "gusw1-dev-fooapp-fe-0001-a-002-ip",
    "gusw1-dev-fooapp-fe-0001-a-003-ip"
  ]

  dns_short_names = [
    "gusw1-dev-fooapp-fe-0001-a-001",
    "gusw1-dev-fooapp-fe-0001-a-002",
    "gusw1-dev-fooapp-fe-0001-a-003"
  ]
}

As with the non-DNS examples above, the addresses input variable can be provided with a list of specific IP addresses to be reserved if desired.

Input variables that cannot contain computed values

Because of the way the module is structured, and due to the fact that Terraform doesn't yet support computed count values, there are certain input variables whose values cannot be computed values. The list of those input variables is as follows:

var.dns_domain
var.dns_short_names
var.enable_cloud_dns
var.enable_reverse_dns
var.global
var.names

You must currently use literal values for these input variables. If you don't you run the risk of failing validation (at the least) or surfacing the dreaded value of 'count' cannot be computed error. Future versions of Terraform may change this fact, but this is the current limitation.

Inputs

Name Description Type Default Required
address_type The type of address to reserve, either "INTERNAL" or "EXTERNAL". If unspecified, defaults to "INTERNAL". string "INTERNAL" no
addresses A list of IP addresses to create. GCP will reserve unreserved addresses if given the value "". If multiple names are given the default value is sufficient to have multiple addresses automatically picked for each name. list(string)
[
""
]
no
dns_domain The domain to append to DNS short names when registering in Cloud DNS. string "" no
dns_managed_zone The name of the managed zone to create records within. This managed zone must exist in the host project. string "" no
dns_project The project where DNS A records will be configured. string "" no
dns_record_type The type of records to create in the managed zone. (e.g. "A") string "A" no
dns_reverse_zone The name of the managed zone to create PTR records within. This managed zone must exist in the host project. string "" no
dns_short_names A list of DNS short names to register within Cloud DNS. Names corresponding to addresses must align by their list index position in the two input variables, names and dns_short_names. If an empty list, no domain names are registered. Multiple names may be registered to the same address by passing a single element list to names and multiple elements to dns_short_names. (e.g. ["gusw1-dev-fooapp-fe-0001-a-001"]) list(string) [] no
dns_ttl The DNS TTL in seconds for records created in Cloud DNS. The default value should be used unless the application demands special handling. number 300 no
enable_cloud_dns If a value is set, register records in Cloud DNS. bool false no
enable_reverse_dns If a value is set, register reverse DNS PTR records in Cloud DNS in the managed zone specified by dns_reverse_zone bool false no
global The scope in which the address should live. If set to true, the IP address will be globally scoped. Defaults to false, i.e. regionally scoped. When set to true, do not provide a subnetwork. bool false no
ip_version The IP Version that will be used by this address. string "IPV4" no
names A list of IP address resource names to create. This is the GCP resource name and not the associated hostname of the IP address. Existing resource names may be found with gcloud compute addresses list (e.g. ["gusw1-dev-fooapp-fe-0001-a-001-ip"]) list(string) [] no
network_tier The networking tier used for configuring this address. string "PREMIUM" no
prefix_length The prefix length of the IP range. number 16 no
project_id The project ID to create the address in string n/a yes
purpose The purpose of the resource(GCE_ENDPOINT, SHARED_LOADBALANCER_VIP, VPC_PEERING). string "GCE_ENDPOINT" no
region The region to create the address in string n/a yes
subnetwork The subnet containing the address. For EXTERNAL addresses use the empty string, "". (e.g. "projects//regions//subnetworks/") string "" no

Outputs

Name Description
addresses List of address values managed by this module (e.g. ["1.2.3.4"])
dns_fqdns List of DNS fully qualified domain names registered in Cloud DNS. (e.g. ["gusw1-dev-fooapp-fe-0001-a-001.example.com", "gusw1-dev-fooapp-fe-0001-a-0002.example.com"])
names List of address resource names managed by this module (e.g. ["gusw1-dev-fooapp-fe-0001-a-0001-ip"])
reverse_dns_fqdns List of reverse DNS PTR records registered in Cloud DNS. (e.g. ["1.2.11.10.in-addr.arpa", "2.2.11.10.in-addr.arpa"])
self_links List of URIs of the created address resources

Requirements

Terraform plugins

Configure a Service Account

In order to execute this module you must have a Service Account with the following roles:

  • roles/dns.admin on the project (for DNS registration)
  • roles/compute.networkAdmin on the organization (or the host project that defines the network)

Script Helper

A helper script is included to automatically grant all the required roles at the project level. The roles/compute.networkAdmin can either be assigned at the project level on the project hosting the network and subnetworks where IP addresses will be reserved, or at the organization level. The setup-sa.sh script will assign it at the project level on the host project that is passed in. If this is not what you need then you will need to adjust permissions accordingly.

Run the script as follows:

./helpers/setup-sa.sh <HOST_PROJECT_NAME> <SERVICE_ACCOUNT_NAME>

The SERVICE_ACCOUNT_NAME can be whatever you want the service account to be named. Successful completion of the setup-sa.sh script will result in a credentials file called credentials.json that can be used with gcloud or referenced by the module tests.

Enable API's

In order to operate with the Service Account you must activate the following API on the project where the Service Account was created:

  • Compute Engine API - compute.googleapis.com
  • Google Cloud DNS API - dns.googleapis.com

NOTE: These APIs are enabled by default on the host project passed in to the ./helpers/setup-sa.sh helper script.

Install

Terraform

Be sure you have the correct Terraform version (0.12.x), you can choose the binary here:

File structure

The project has the following folders and files:

  • /: root folder
  • /examples: examples for using this module
  • /test: Folders with files for testing the module (see Testing section on this file)
  • /main.tf: main file for this module, contains all the resources to create
  • /variables.tf: all the variables for the module
  • /output.tf: the outputs of the module
  • /README.md: this file

Packages

No packages published

Languages

  • Shell 41.5%
  • HCL 23.0%
  • Python 19.4%
  • Ruby 12.0%
  • Makefile 4.1%