Skip to content
This repository has been archived by the owner on Feb 13, 2024. It is now read-only.

maestrodev/librarian-puppet

 
 

Repository files navigation

Librarian-puppet

Build Status

Note

Since 0.9.11.6 this fork is no longer used, as I am committing directly to rodjek's librarian-puppet and pushing to librarian-puppet

librarian-puppet-maestrodev 0.9.11.6 is effectively the same as librarian-puppet 0.9.11

Introduction

Librarian-puppet is a bundler for your puppet infrastructure. You can use librarian-puppet to manage the puppet modules your infrastructure depends on. It is based on Librarian, a framework for writing bundlers, which are tools that resolve, fetch, install, and isolate a project's dependencies.

Librarian-puppet manages your modules/ directory for you based on your Puppetfile. Your Puppetfile becomes the authoritative source for what modules you require and at what version, tag or branch.

Once using Librarian-puppet you should not modify the contents of your modules directory. The individual modules' repos should be updated, tagged with a new release and the version bumped in your Puppetfile.

The Puppetfile

Every Puppet repository that uses Librarian-puppet will have a file named Puppetfile in the root directory of that repository. The full specification for which modules your puppet infrastructure repository depends goes in here.

Simple Puppetfile

This Puppetfile will download all the dependencies listed in your Modulefile from the Puppet Forge

forge "http://forge.puppetlabs.com"

modulefile

Example Puppetfile

forge "http://forge.puppetlabs.com"

mod "puppetlabs/razor"
mod "puppetlabs/ntp", "0.0.3"

mod "apt",
  :git => "git://github.com/puppetlabs/puppetlabs-apt.git"

mod "stdlib",
  :git => "git://github.com/puppetlabs/puppetlabs-stdlib.git"

See jenkins-appliance for a puppet repo already setup to use librarian-puppet.

Recursive module dependency resolving

When fetching a module from a :git-source all dependencies specified in its Modulefile and Puppetfile will be resolved and installed.

Puppetfile Breakdown

forge "http://forge.puppetlabs.com"

This declares that we want to use the official Puppet Labs Forge as our default source when pulling down modules. If you run your own local forge, you may want to change this.

mod "puppetlabs/razor"

Pull in the latest version of the Puppet Labs Razor module from the default source.

mod "puppetlabs/ntp", "0.0.3"

Pull in version 0.0.3 of the Puppet Labs NTP module from the default source.

mod "apt",
  :git => "git://github.com/puppetlabs/puppetlabs-apt.git"

Our puppet infrastructure repository depends on the apt module from the Puppet Labs GitHub repos and checks out the master branch.

mod "apt",
  :git => "git://github.com/puppetlabs/puppetlabs-apt.git",
  :ref => '0.0.3'

Our puppet infrastructure repository depends on the apt module from the Puppet Labs GitHub repos and checks out a tag of 0.0.3.

mod "apt",
  :git => "git://github.com/puppetlabs/puppetlabs-apt.git",
  :ref => 'feature/master/dans_refactor'

Our puppet infrastructure repository depends on the apt module from the Puppet Labs GitHub repos and checks out the dans_refactor branch.

When using a Git source, we do not have to use a :ref =>. If we do not, then librarian-puppet will assume we meant the master branch.

If we use a :ref =>, we can use anything that Git will recognize as a ref. This includes any branch name, tag name, SHA, or SHA unique prefix. If we use a branch, we can later ask Librarian-puppet to update the module by fetching the most recent version of the module from that same branch.

The Git source also supports a :path => option. If we use the path option, Librarian-puppet will navigate down into the Git repository and only use the specified subdirectory. Some people have the habit of having a single repository with many modules in it. If we need a module from such a repository, we can use the :path => option here to help Librarian-puppet drill down and find the module subdirectory.

mod "apt",
  :git => "git://github.com/fake/puppet-modules.git",
  :path => "modules/apt"

Our puppet infrastructure repository depends on the apt module, which we have stored as a directory under our puppet-modules git repos.

How to Use

Install librarian-puppet:

$ gem install librarian-puppet

Prepare your puppet infrastructure repository:

$ cd ~/path/to/puppet-inf-repos
$ (git) rm -rf modules
$ librarian-puppet init

Librarian-puppet takes over your modules/ directory, and will always reinstall (if missing) the modules listed the Puppetfile.lock into your modules/ directory, therefore you do not need your modules/ directory to be tracked in Git.

Librarian-puppet uses a .tmp/ directory for tempfiles and caches. You should not track this directory in Git.

Running librarian-puppet init will create a skeleton Puppetfile for you as well as adding tmp/ and modules/ to your .gitignore.

$ librarian-puppet install [--clean] [--verbose]

This command looks at each mod declaration and fetches the module from the source specified. This command writes the complete resolution into Puppetfile.lock and then copies all of the fetched modules into your modules/ directory, overwriting whatever was there before.

Get an overview of your Puppetfile.lock with:

$ librarian-puppet show

Inspect the details of specific resolved dependencies with:

$ librarian-puppet show NAME1 [NAME2, ...]

Find out which dependencies are outdated and may be updated:

$ librarian-puppet outdated [--verbose]

Update the version of a dependency:

$ librarian-puppet update apt [--verbose]
$ git diff Puppetfile.lock
$ git add Puppetfile.lock
$ git commit -m "bumped the version of apt up to 0.0.4."

Configuration

Configuration comes from three sources with the following highest-to-lowest precedence:

  • The local config (./.librarian/puppet/config)
  • The environment
  • The global config (~/.librarian/puppet/config)

You can inspect the final configuration with:

$ librarian-puppet config

You can find out where a particular key is set with:

$ librarian-puppet config KEY

You can set a key at the global level with:

$ librarian-puppet config KEY VALUE --global

And remove it with:

$ librarian-puppet config KEY --global --delete

You can set a key at the local level with:

$ librarian-puppet config KEY VALUE --local

And remove it with:

$ librarian-puppet config KEY --local --delete

You cannot set or delete environment-level config keys with the CLI.

Configuration set at either the global or local level will affect subsequent invocations of librarian-puppet. Configurations set at the environment level are not saved and will not affect subsequent invocations of librarian-puppet.

You can pass a config at the environment level by taking the original config key and transforming it: replace hyphens (-) with underscores (_) and periods (.) with doubled underscores (__), uppercase, and finally prefix with LIBRARIAN_PUPPET_. For example, to pass a config in the environment for the key part-one.part-two, set the environment variable LIBRARIAN_PUPPET_PART_ONE__PART_TWO.

Configuration affects how various commands operate.

  • The path config sets the cookbooks directory to install to. If a relative path, it is relative to the directory containing the Puppetfile. The equivalent environment variable is LIBRARIAN_PUPPET_PATH.

  • The tmp config sets the cache directory for librarian. If a relative path, it is relative to the directory containing the Puppetfile. The equivalent environment variable is LIBRARIAN_PUPPET_TMP.

Configuration can be set by passing specific options to other commands.

  • The path config can be set at the local level by passing the --path option to the install command. It can be unset at the local level by passing the --no-path option to the install command. Note that if this is set at the environment or global level then, even if --no-path is given as an option, the environment or global config will be used.

How to Contribute

  • Pull requests please.
  • Bonus points for feature branches.

Reporting Issues

Bug reports to the github issue tracker please. Please include:

  • Relevant Puppetfile and Puppetfile.lock files
  • Version of ruby, librarian-puppet
  • What distro
  • Please run the librarian-puppet commands in verbose mode by using the --verbose flag, and include the verbose output in the bug report as well.

License

Please see the LICENSE file.

About

Since 0.9.11.6 this fork is no longer used

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Ruby 98.8%
  • Puppet 1.2%