This repository contains my Emacs configuration. It is written and documented in literate programming style.
If you’re new to Emacs and just want to have a look around: Lean back and relax while enjoying a deep dive into the wonderful world of the Emacs editor. I have a talk “Play Emacs like an instrument” which is a small teaser of what Emacs can do - and what kinds of features you’ll find in this repository: https://www.youtube.com/watch?v=gfZDwYeBlO4
Initial
Emacs configuration is usually done in the home directory in the
.emacs.d folder. This holds true for Unix and Linux systems. For
Windows, look it up here.
git clone https://github.com/munen/emacs.d.git ~/.emacs.d
Emacs dependencies/libraries are managed via the internal package
management system. To initially install packages, open
~/.emacs.d/init.el, refresh your package list with M-x
package-refresh-contents and install everything using M-x
eval-buffer.
I’m running Debian and for some things I use GNU Guix for package management. This Emacs config started out using just package.el, but it’s moving towards using Guix whenever possible. The benefits are plenty:
- No package drift
- Ability to install dependencies outside of Emacs (fonts, binaries, etc)
- Reproducibility
- Transactional upgrades with the option to roll back
Spread throughout this config, there are source blocks with
:noweb-ref packages config. They define Guix packages which are
tangled into one Emacs manifest, so that all things Emacs are well
defined in just one config file.
(specifications->manifest
'("emacs"
<<packages>>
))
This adds the installed packages to the standard Emacs load path, so
that require just works.
;; Single directory
;; (add-to-list 'load-path "~/.guix-profile/share/emacs/site-lisp/mu4e")
;; All sub directories
(let ((default-directory "~/.guix-profile/share/emacs/site-lisp/"))
(normal-top-level-add-subdirs-to-load-path))https://github.com/yilkalargaw/org-auto-tangle
Whenever a change to the Guix package blocks is made, it would be
possible to manually call M-x org-babel-tangle (C-c C-v t).
With auto-tangle, it’s a bit more convenient, though.
(require 'org-auto-tangle)
(add-hook 'org-mode-hook 'org-auto-tangle-mode)Guix package
"emacs-org-auto-tangle"
(require 'package)
(setq package-archives '(("gnu" . "https://elpa.gnu.org/packages/")
;; ("nongnu" . "https://elpa.nongnu.org/nongnu/")
("melpa" . "https://melpa.org/packages/")
))List all used third-party packages. Most will be configured further down in this file, some are used with the default configuration.
(defvar my-packages '(ace-window
ac-js2
ag
atomic-chrome
auto-complete
beacon
bicycle
browse-kill-ring
cider
clj-refactor
clojure-mode
coffee-mode
counsel-jq
comment-tags
darktooth-theme
dired-narrow
diminish
dumb-jump
edit-indirect
editorconfig
elfeed
elfeed-goodies
emacs-everywhere
enh-ruby-mode
erc-image
evil
evil-escape
evil-leader
evil-mc
evil-numbers
evil-surround
exec-path-from-shell
forge
flycheck
flycheck-flow
flycheck-grammarly
flycheck-package
gnuplot
hcl-mode
hide-mode-line
impatient-mode
ivy counsel swiper
json-mode
js2-mode
js2-refactor
js-comint
ledger-mode
magit
magit-delta
markdown-mode
org-ai
package-lint
pdf-tools
projectile
rainbow-mode
rjsx-mode
ob-restclient
restclient
robe
sass-mode
smex
synosaurus
tide
visual-fill-column
web-mode
which-key
writegood-mode
writeroom-mode
quelpa
yaml-mode
zenburn-theme))(dolist (p my-packages)
(unless (package-installed-p p)
(package-refresh-contents)
(package-install p))
(add-to-list 'package-selected-packages p))https://github.com/quelpa/quelpa
Build and install your Emacs Lisp packages on-the-fly directly from source.
This section contains settings for built-in Emacs features.
Emacs 26.1 (for example in Debian Buster) requests the GNU Elpa repo with the wrong TLS version - which makes the request fail. This is a manual patch for older versions of Emacs. It’s fixed from 26.3 and above upstream.
(if (string< emacs-version
"26.3")
(setq gnutls-algorithm-priority "NORMAL:-VERS-TLS1.3"))Allow 20MB of memory (instead of 0.76MB) before calling garbage collection. This means GC runs less often, which speeds up some operations.
(setq gc-cons-threshold 20000000)(setq make-backup-files nil)The default warning comes with a 10MB file size which my machine handles with no noticeable delay at all. Hence, only warn when opening files bigger than 200MB.
(setq large-file-warning-threshold 200000000)Store backups and auto-saved files in TEMPORARY-FILE-DIRECTORY (which
defaults to /tmp on Unix), instead of in the same directory as the
file.
(setq backup-directory-alist
`((".*" . ,temporary-file-directory)))
(setq auto-save-file-name-transforms
`((".*" ,temporary-file-directory t)))When opening a file, always follow symlinks.
(setq vc-follow-symlinks t)Don’t assume that sentences should have two spaces after periods.
(setq sentence-end-double-space nil)(setq confirm-kill-emacs 'y-or-n-p)Ability to use a to visit a new directory or file in dired instead
of using RET. RET works just fine, but it will create a new buffer
for every interaction whereas a reuses the current buffer.
(put 'dired-find-alternate-file 'disabled nil)Human readable units
(setq-default dired-listing-switches "-alh")On C, recursively copy by default
(setq dired-recursive-copies 'always)dired-narrow of the dired-hacks repository allows to dynamically
narrow a dired buffer down to contents of interest. A demo can be seen
on this blog post.
(require 'dired)
(define-key dired-mode-map (kbd "/") 'dired-narrow-fuzzy)Commands:
/starts fuzzy matching- Use the dired buffer as usual
gto go back to the complete file listing
This is a favorable shorthand.
(fset 'yes-or-no-p 'y-or-n-p)When something changes a file, automatically refresh the buffer containing that file so they can’t get out of sync.
(global-auto-revert-mode t)(defun zoom-in ()
(interactive)
(let ((x (+ (face-attribute 'default :height)
10)))
(set-face-attribute 'default nil :height x)))
(defun zoom-out ()
(interactive)
(let ((x (- (face-attribute 'default :height)
10)))
(set-face-attribute 'default nil :height x)))
(define-key global-map (kbd "C-1") 'zoom-in)
(define-key global-map (kbd "C-0") 'zoom-out)(setq inhibit-splash-screen t)
(setq inhibit-startup-message t)(display-time-mode t)(tool-bar-mode 0)Do not enable automatic line breaks for all text-mode based hooks,
because several text-modes (markdown, mails) enjoy the pain of long
lines. So here, I only add whitelisted modes sparingly. The other
modes have a visual-line-mode= configuration which makes the text
look nice locally, at least.
(add-hook 'org-mode-hook 'auto-fill-mode)https://github.com/joostkremers/visual-fill-column
visual-fill-column-mode is a small Emacs minor mode that mimics the
effect of fill-column in visual-line-mode. Instead of wrapping
lines at the window edge, which is the standard behaviour of
visual-line-mode, it wraps lines at fill-column. If fill-column
is too large for the window, the text is wrapped at the window edge.
Enable whenever upstream visual-line-mode is activated.
(add-hook 'visual-line-mode-hook #'visual-fill-column-mode)Enable visual-fill-mode for all text based modes:
;; Don't do it at this time, it's only enabled for some modes explicitly.
;; (add-hook 'text-mode-hook 'visual-line-mode)Enable adative-wrap-prefix-mode:
https://elpa.gnu.org/packages/adaptive-wrap.html
This package provides the `adaptive-wrap-prefix-mode’ minor mode which sets the wrap-prefix property on the fly so that single-long-line paragraphs get word-wrapped in a way similar to what you’d get with M-q using adaptive-fill-mode, but without actually changing the buffer’s text.
(add-hook 'visual-line-mode-hook #'adaptive-wrap-prefix-mode)Enable narrow-to-region (C-x n n / C-x n w). This is disabled by
default to not confuse beginners.
(put 'narrow-to-region 'disabled nil)(scroll-bar-mode -1)(setq save-place-file "~/.emacs.d/saveplace")
(if (version<= emacs-version "25.1")
(progn
(setq-default save-place t)
(require 'saveplace))
(save-place-mode 1))Set $MANPATH, $PATH and exec-path from shell even when started from GUI helpers like dmenu or Spotlight
;; Safeguard, so this only runs on Linux (or MacOS)
(when (memq window-system '(mac ns x))
(exec-path-from-shell-initialize))https://github.com/abo-abo/ace-window
Quickly switch windows in Emacs
(global-set-key (kbd "M-o") 'ace-window)Allows to ‘undo’ (and ‘redo’) changes in the window configuration with the key commands ‘C-c left’ and ‘C-c right’.
(when (fboundp 'winner-mode)
(winner-mode 1))Getting from many windows to one window is easy: ‘C-x 1’ will do it. But getting back to a delicate WindowConfiguration is difficult. This is where Winner Mode comes in: With it, going back to a previous session is easy.
Do not ring the system bell, but show a visible feedback.
(setq visible-bell t)Try to use passive mode for FTP.
Note: Some firewalls might not allow standard active mode. However: Some FTP Servers might not allow passive mode. So if there’s problems when connecting to an FTP, try to revert to active mode.
(setq ange-ftp-try-passive-mode t)When entering eww, use cursors to scroll without changing point.
(add-hook 'eww-mode-hook 'scroll-lock-mode)(setq custom-file "~/.emacs.d/custom-settings.el")
(load custom-file t)https://www.gnu.org/software/emacs/manual/html_node/emacs/Bidirectional-Editing.html
Emacs supports editing text written in scripts, such as Arabic, Farsi, and Hebrew, whose natural ordering of horizontal text for display is from right to left. However, digits and Latin text embedded in these scripts are still displayed left to right.
Whilst this is a great feature, it adds to the amount of line scans that Emacs has to do to render a line. Too many line scans will cause Emacs to hang. Since I personally do not work with right-to-left languages, I’m defaulting to displaying all paragraphs in a left-to-right manner.
(setq-default bidi-paragraph-direction 'left-to-right)
(if (version<= "27.1" emacs-version)
(setq bidi-inhibit-bpa t))When the lines in a file are so long that performance could suffer to an unacceptable degree, we say “so long” to the slow modes and options enabled in that buffer, and invoke something much more basic in their place.
(if (version<= "27.1" emacs-version)
(global-so-long-mode 1))Do not report warnings and errors from asynchronous native compilation.
(setq native-comp-async-report-warnings-errors nil)(when (>= emacs-major-version 29)
(pixel-scroll-precision-mode 1))(global-undo-tree-mode)
(setq undo-tree-auto-save-history nil)
(with-eval-after-load 'evil
(define-key evil-normal-state-map (kbd "u") 'undo-tree-undo)
(define-key evil-normal-state-map (kbd "C-r") 'undo-tree-redo))Guix package
"emacs-undo-tree"
Things that should not be public.
(when (file-exists-p "~/.emacs.d/private_config.el")
(load "~/.emacs.d/private_config.el"))Some helper functions and packages I wrote that are only accessible within this Git repository and not published to a package repository.
Elisp wrapper around the dict.cc translation service. Translations are exposed in an org-mode table.
Demo:
(load "~/.emacs.d/dict")When switching projects in Emacs, it can be prudent to clean up every
once in a while. Deleting all buffers except the current one is one of
the things I often do (especially in the long-running emacsclient).
(defun kill-other-buffers ()
"Kill all other buffers."
(interactive)
(mapc 'kill-buffer (delq (current-buffer) (buffer-list))))dired will create buffers for every visited folder. This is a helper
to clear them out once you’re done working with those folders.
(defun kill-dired-buffers ()
"Kill all open dired buffers."
(interactive)
(mapc (lambda (buffer)
(when (eq 'dired-mode (buffer-local-value 'major-mode buffer))
(kill-buffer buffer)))
(buffer-list)))Rudimentary function converting certain HTML syntax to HTML entities.
(defun encode-html (start end)
"Encodes HTML entities; works great in Visual Mode (START END)."
(interactive "r")
(save-excursion
(save-restriction
(narrow-to-region start end)
(goto-char (point-min))
(replace-string "&" "&")
(goto-char (point-min))
(replace-string "<" "<")
(goto-char (point-min))
(replace-string ">" ">"))))When working on markdown or org-mode files that will be converted to
PDF, I use pdf-tools to preview the PDF and shortcuts to
automatically save, compile and reload on demand.
Here is a screencast showing how I edit Markdown or org-mode files in Emacs whilst having a PDF preview.
In a screenshot, it looks like this:
(defun md-compile ()
"Compiles the currently loaded markdown file using pandoc into a PDF"
(interactive)
(save-buffer)
(shell-command (concat "pandoc " (buffer-file-name) " -o "
(replace-regexp-in-string "md" "pdf" (buffer-file-name)))))
(defun update-other-buffer ()
(interactive)
(other-window 1)
(revert-buffer nil t)
(other-window -1))
(defun md-compile-and-update-other-buffer ()
"Has as a premise that it's run from a markdown-mode buffer and the
other buffer already has the PDF open"
(interactive)
(md-compile)
(update-other-buffer))
(defun latex-compile-and-update-other-buffer ()
"Has as a premise that it's run from a latex-mode buffer and the
other buffer already has the PDF open"
(interactive)
(save-buffer)
(shell-command (concat "pdflatex " (buffer-file-name)))
(switch-to-buffer (other-buffer))
(kill-buffer)
(update-other-buffer))
(defun org-compile-beamer-and-update-other-buffer ()
"Has as a premise that it's run from an org-mode buffer and the
other buffer already has the PDF open"
(interactive)
(org-beamer-export-to-pdf)
(update-other-buffer))
(defun org-compile-latex-and-update-other-buffer ()
"Has as a premise that it's run from an org-mode buffer and the
other buffer already has the PDF open"
(interactive)
(org-latex-export-to-pdf)
(update-other-buffer))
(eval-after-load 'latex-mode
'(define-key latex-mode-map (kbd "C-c r") 'latex-compile-and-update-other-buffer))
(define-key org-mode-map (kbd "C-c lr") 'org-compile-latex-and-update-other-buffer)
(define-key org-mode-map (kbd "C-c br") 'org-compile-beamer-and-update-other-buffer)
(eval-after-load 'markdown-mode
'(define-key markdown-mode-map (kbd "C-c r") 'md-compile-and-update-other-buffer))Unrelated to Emacs, in macOS, you can write Umlauts by using the combo
M-u [KEY]. For example M-u u will create the letter ü.
This is actually faster than the default way of Emacs or that of VIM. The following code ports that functionality to Emacs.
Thx @jcfischer for the function!
(define-key key-translation-map [dead-diaeresis]
(lookup-key key-translation-map "\C-x8\""))
(define-key isearch-mode-map [dead-diaeresis] nil)
(global-set-key (kbd "M-u")
(lookup-key key-translation-map "\C-x8\""))
Through pwgen.
Thanks to @branch14 of 200ok fame for the function!
(defun generate-password-non-interactive ()
(string-trim (shell-command-to-string "pwgen -A 24")))
(defun generate-password ()
"Generates and inserts a new password"
(interactive)
(insert
(shell-command-to-string
(concat "pwgen -A " (read-string "Length: " "24") " 1"))))Open the GPG encrypted password file.
Within this file, I’ll search for passwords with counsel-imenu which
has nice auto-completion and means that the headers will always be
folded, so that no other person can see the passwords.
When the right header is found, I’ll copy the password under the current header to the clipboard from where I can use it where I need it (for example a browser):
(fset 'copy-password-to-clipboard
[?\C-s ?P ?a ?s ?s ?w ?o ?r ?d ?: return ?w ?v ?$ ?y C-up C-up C-up tab])(defun passwords ()
"Open main 'passwords' file."
(interactive)
(find-file (concat org-directory "vault/primary.org.gpg")))If you’re a zsh user, you might have configured a custom prompt
and such. Also, you might be using a powerful $TERM for that.
When running zsh within M-x shell, you will have to set the
$TERM to dumb, though. Otherwise you’ll get all kinds of escape
sequences instead of colored text.
I’m using this within my ~/.zshrc
# This allows running `shell` properly within Emacs
if [ -n "$INSIDE_EMACS" ]; then
export TERM=dumb
else
export TERM=xterm-256color
fiThis is the converse function to the built-in server-start.
(defun server-shutdown ()
"Save buffers, Quit, and Shutdown (kill) server"
(interactive)
(save-some-buffers)
(kill-emacs))(defmacro measure-time (&rest body)
"Measure the time it takes to evaluate BODY."
`(let ((time (current-time)))
,@body
(message "%.06f" (float-time (time-since time)))))For example (measure-time (prettier-eslint).
If the current buffer is not writable, ask if it should be saved with
sudo.
Happily taken from Pascals configuration: https://github.com/SirPscl/emacs.d#sudo-save
(defun ph/sudo-file-name (filename)
"Prepend '/sudo:root@`system-name`:' to FILENAME if appropriate.
This is, when it doesn't already have a sudo-prefix."
(if (not (or (string-prefix-p "/sudo:root@localhost:"
filename)
(string-prefix-p (format "/sudo:root@%s:" system-name)
filename)))
(format "/sudo:root@%s:%s" system-name filename)
filename))
(defun ph/sudo-save-buffer ()
"Save FILENAME with sudo if the user approves."
(interactive)
(when buffer-file-name
(let ((file (ph/sudo-file-name buffer-file-name)))
(if (yes-or-no-p (format "Save file as %s ? " file))
(write-file file)))))
(advice-add 'save-buffer :around
'(lambda (fn &rest args)
(when (or (not (buffer-file-name))
(not (buffer-modified-p))
(file-writable-p (buffer-file-name))
(not (ph/sudo-save-buffer)))
(call-interactively fn args))))This configuration is originally from the great bbatsov’s prelude.
“`bash emacsclient somefile:1234 “`
This will open file ‘somefile’ and set cursor on line 1234.
(defadvice server-visit-files (before parse-numbers-in-lines (files proc &optional nowait) activate)
"Open file with emacsclient with cursors positioned on requested line.
Most of console-based utilities prints filename in format
'filename:linenumber'. So you may wish to open filename in that format.
Just call:
emacsclient filename:linenumber
and file 'filename' will be opened and cursor set on line 'linenumber'"
(ad-set-arg 0
(mapcar (lambda (fn)
(let ((name (car fn)))
(if (string-match "^\\(.*?\\):\\([0-9]+\\)\\(?::\\([0-9]+\\)\\)?$" name)
(cons
(match-string 1 name)
(cons (string-to-number (match-string 2 name))
(string-to-number (or (match-string 3 name) ""))))
fn))) files)));; https://www.reddit.com/r/emacs/comments/idz35e/emacs_27_can_take_svg_screenshots_of_itself/
(defun screenshot-svg ()
"Save a screenshot of the current frame as an SVG image.
Saves to a temp file and puts the filename in the kill ring."
(interactive)
(let* ((filename (make-temp-file "Emacs" nil ".svg"))
(data (x-export-frames nil 'svg)))
(with-temp-file filename
(insert data))
(kill-new filename)
(message filename)))isearch can find a wide range of Unicode characters (like á, ⓐ, or 𝒶) when you search for ASCII characters (a in this example).
(setq search-default-mode #'char-fold-to-regexp)https://emacsredux.com/blog/2013/04/02/move-current-line-up-or-down/
(defun move-line-up ()
"Move up the current line."
(interactive)
(transpose-lines 1)
(forward-line -2)
(indent-according-to-mode))
(defun move-line-down ()
"Move down the current line."
(interactive)
(forward-line 1)
(transpose-lines 1)
(forward-line -1)
(indent-according-to-mode))
(global-set-key (kbd "M-<down>") 'move-line-down)
(global-set-key (kbd "M-<up>") 'move-line-up)The productivity-of-the-day returns the total number of TODO
statements that have either been added or removed from all agenda
files. This is a pretty good proxy for productivity - or at least to
see that there’s a bit of progress throughout the day.
The codes does the following:
- For any org-agenda-file, go to its base directory.
- Count the added or removed TODO statements with
git log --since=midnight -p things.org | grep TODO | grep -E "^\+|^\-" | wc -l - Aggregate and print.
(defun count-lines-with-expression (s exp)
"Count the number of lines in the string S that contain the regular expression EXP."
(let ((count 0))
(mapc (lambda (line)
(when (string-match-p exp line)
(setq count (+ 1 count))))
(split-string s "\n"))
count))
(defun productivity-of-the-day ()
(seq-reduce
(lambda (acc it)
(let* ((folder (file-name-directory it))
(file (file-name-nondirectory it))
(base-cmd (concat "cd "
folder
"; git log --since=midnight -p "
file
"| egrep 'TODO|WAITING'"))
(changed (shell-command-to-string base-cmd))
(added (count-lines-with-expression changed "^\\+"))
(removed (count-lines-with-expression changed "^\\-")))
(cons (+ (car acc) added)
(- (cdr acc) removed))))
org-agenda-files
'(0 . 0)))The grep -E part ensures that the function counts all occurences of
TODO which have either been added or removed by discounting the ones
that are just in the vicinity and also shown in the diff.
I add the result of productivity-of-the-day to my i3 status bar
(polybar), so it’s always visible. Here’s the config for it.
This section contains settings for non-built-in Emacs features that are generally applicable to different kinds of modes.
https://github.com/Malabarba/beacon
Whenever the window scrolls a light will shine on top of your cursor so you know where it is.
(beacon-mode 1)Ever wish you could just look through everything you’ve killed recently to find out if you killed that piece of text that you think you killed (or yanked), but you’re not quite sure? If so, then browse-kill-ring is the Emacs extension for you.
(require 'browse-kill-ring)
(setq browse-kill-ring-highlight-inserted-item t
browse-kill-ring-highlight-current-entry nil
browse-kill-ring-show-preview t)
(define-key browse-kill-ring-mode-map (kbd "j") 'browse-kill-ring-forward)
(define-key browse-kill-ring-mode-map (kbd "k") 'browse-kill-ring-previous)https://github.com/tecosaur/emacs-everywhere/
"xclip"
"xdotool"
"xprop"
"xwininfo"
https://github.com/emacs-gnuplot/gnuplot
"emacs-gnuplot"
Evil is an extensible Vim layer for Emacs.
This combines the best of both worlds: VIM being a great text-editor with modal editing through semantic commands and Emacs being a LISP REPL.
(evil-mode t)
;; Enable "M-x" in evil mode
(global-set-key (kbd "M-x") 'execute-extended-command)(global-evil-leader-mode)
(evil-leader/set-leader ",")
(evil-leader/set-key
"w" 'basic-save-buffer
"s" 'flyspell-buffer
"b" 'evil-buffer
"q" 'evil-quit)(require 'evil-surround)
(global-evil-surround-mode 1)https://github.com/gabesoft/evil-mc
evil-mc provides multiple cursors functionality for Emacs when used
with evil-mode.
C-n / C-p are used for creating cursors, and M-n / M-p are used
for cycling through cursors. The commands that create cursors wrap
around; but, the ones that cycle them do not. To skip creating a
cursor forward use C-t or grn and backward grp. Finally use
gru to remove all cursors.
(global-evil-mc-mode 1)(define-key evil-normal-state-map (kbd "{") 'evil-next-buffer)
(define-key evil-normal-state-map (kbd "}") 'evil-prev-buffer)(global-set-key (kbd "C-=") 'evil-numbers/inc-at-pt)
(global-set-key (kbd "C--") 'evil-numbers/dec-at-pt)
(define-key evil-normal-state-map (kbd "C-=") 'evil-numbers/inc-at-pt)
(define-key evil-normal-state-map (kbd "C--") 'evil-numbers/dec-at-pt)(define-key evil-normal-state-map (kbd "j") 'evil-next-visual-line)
(define-key evil-normal-state-map (kbd "k") 'evil-previous-visual-line)(define-key evil-insert-state-map (kbd "C-v") 'evil-visual-paste)
Since Emacs is a multi-purpose LISP REPL, there are many modes that
are not primarily (or not at all) centered about text-manipulation.
For those, it is reasonable to disable evil-mode, because it will
bring nothing to the table, but might just shadow some keyboard
shortcuts.
(mapc (lambda (mode)
(evil-set-initial-state mode 'emacs)) '(elfeed-show-mode
elfeed-search-mode
forge-pullreq-list-mode
forge-topic-list-mode
dired-mode
tide-references-mode
image-dired-mode
image-dired-thumbnail-mode
eww-mode))Turning off evil when working in cider--debug minor mode:
(defadvice cider--debug-mode (after toggle-evil activate)
"Turn off `evil-local-mode' when enabling
`cider--debug-mode', and turn it back on when disabling
`cider--debug-mode'."
(evil-local-mode (if cider--debug-mode -1 1)))M-. and M-,= are popular keybindings for "jump to definition" and
"back". =evil-mode by default binds those to rather rarely used
functions evil-repeat-pop-next and xref-pop-marker-stack, for some reason.
(define-key evil-normal-state-map (kbd "M-.") nil)
(define-key evil-normal-state-map (kbd "M-,") nil)M-l and M-l M-l is downcase-word. This happens a lot by accident
for me. And undoing it often undoes a lot more - like deleting whole
paragraphs of text. Also, I don’t need it, because I’d use evil
bindings for that.
(define-key global-map (kbd "M-l") nil)
(define-key evil-insert-state-map (kbd "M-l M-l") nil)M-k is kill-sentence. That happens by accident, as well. And
sometimes, when in insert-mode, it even erases the history. I don’t
need it, I’d use evil for that.
(define-key global-map (kbd "M-k") nil)
(define-key evil-insert-state-map (kbd "M-k M-k") nil)TAB is evil-jump-forward: Go to newer position in jump list.
(define-key global-map (kbd "<tab>") nil)
(define-key evil-insert-state-map (kbd "<tab>") nil)
(evil-define-key 'normal org-mode-map (kbd "<tab>") #'org-cycle)(setq evil-ex-visual-char-range t)Example:
When visually selecting “foo” out of the string “foo foobar”, and then
calling :s/o/i/g, the result would be “fii fiibar” without this
setting. With this setting, it will be “fii foobar”.
https://github.com/syl20bnr/evil-escape
Escape from insert state and everything else.
(setq-default evil-escape-delay 0.2)
(setq-default evil-escape-key-sequence "jk")
(evil-escape-mode)This results in the same feature-set like this vim keybinding:
"Remap ESC to jk
:imap jk <esc>With backward-kill-sentence, I sometimes shoot myself in the foot. I
trigger this shortcut by accident and then all kinds of stuff happens.
And undo-tree-undo does not always undo the deed for reasons.
Anyway, I do not need the Emacs style backward-kill-sentence:
(global-unset-key (kbd "C-x <backspace>"))
(global-unset-key (kbd "C-x DEL"))which-key displays available keybindings in a popup.
(add-hook 'org-mode-hook 'which-key-mode)
(add-hook 'cider-mode-hook 'which-key-mode)Use which-key to show VIM shortcuts, too.
(setq which-key-allow-evil-operators t)
(setq which-key-show-operator-state-maps t)https://github.com/auto-complete/auto-complete
Basic Configuration
(ac-config-default)Set tab width to 2 for all buffers
(setq-default tab-width 2)Use 2 spaces instead of a tab.
(setq-default tab-width 2 indent-tabs-mode nil)Indentation cannot insert tabs.
(setq-default indent-tabs-mode nil)Use 2 spaces instead of tabs for programming languages.
(setq js-indent-level 2)
(setq coffee-tab-width 2)
(setq python-indent 2)
(setq css-indent-offset 2)
(add-hook 'sh-mode-hook
(lambda ()
(setq sh-basic-offset 2
sh-indentation 2)))
(setq web-mode-markup-indent-offset 2)Enable global on the fly syntax checking through flycheck.
(add-hook 'after-init-hook #'global-flycheck-mode)https://github.com/purcell/flycheck-package
This library provides a flycheck checker for the metadata in Emacs Lisp files which are intended to be packages. That metadata includes the package description, its dependencies and more.
(eval-after-load 'flycheck
'(flycheck-package-setup))https://github.com/emacs-grammarly/flycheck-grammarly
Grammarly support for flycheck.
Do not enable by default, so that not all text is sent to grammarly.com automatically. I will only enable this in a separate Emacs instance when needed.
;; (require 'flycheck-grammarly)(define-key global-map (kbd "RET") 'newline-and-indent)(show-paren-mode t)Delete trailing whitespace in all modes. Except when editing Markdown, because it uses two trailing blanks as a signal to create a line break.
(add-hook 'before-save-hook '(lambda()
(when (not (or (derived-mode-p 'markdown-mode)
(derived-mode-p 'org-mode)))
(delete-trailing-whitespace))))Enable code folding for programming modes with two strategies:
zc: Close fold (one)za: Toggle fold (one)zr: Open folds (all)zm: Close folds (all)
(add-hook 'prog-mode-hook #'hs-minor-mode)outline-minor-mode is built-in to Emacs. It enables structural
editing of hierarchical structures - just as Org mode does, but in any
major mode.
Change the shortcuts to be the same as in Org mode:
(add-hook 'prog-mode-hook #'outline-minor-mode)
;; Org mode style keybindings
(define-key outline-minor-mode-map (kbd "C-<return>") 'outline-insert-heading)
(define-key outline-minor-mode-map (kbd "M-S-<right>") 'outline-demote)
(define-key outline-minor-mode-map (kbd "M-S-<left>") 'outline-promote)
(define-key outline-minor-mode-map (kbd "C-c C-n") 'outline-next-visible-heading)
(define-key outline-minor-mode-map (kbd "C-c C-p") 'outline-previous-visible-heading)Leverage the bicycle library from tarsius for the ability to cycle visibility of local and global sections:
(define-key outline-minor-mode-map (kbd "C-<tab>") 'bicycle-cycle)
(define-key outline-minor-mode-map (kbd "<backtab>") 'bicycle-cycle-global)Use the built-in foldout.el to narrow and widen the current subtree:
(require 'foldout)
(define-key outline-minor-mode-map (kbd "C-x n s") 'foldout-zoom-subtree)
(define-key outline-minor-mode-map (kbd "C-x n w") 'foldout-exit-fold)Enable linum-mode for programming modes. For newer versions of
Emacs, use display-line-numbers-mode, because it’s much faster.
(add-hook 'prog-mode-hook '(lambda ()
(if (version<= emacs-version "26.0.50")
(linum-mode)
(display-line-numbers-mode))))(defun indent-buffer ()
(interactive)
(save-excursion
(indent-region (point-min) (point-max) nil)))For syntax checking to work, installing the command-line linter tools ruby-lint and eslint are a premise:
gem install rubocop ruby-lint
npm install -g eslint(setq ruby-indent-level 2)
;; scss-mode blocks Emacs when opening bigger files, so open them with css-mode
(add-to-list 'auto-mode-alist '("\\.scss?\\'" . css-mode))
(add-to-list 'auto-mode-alist '("\\.rb?\\'" . enh-ruby-mode))
(add-to-list 'auto-mode-alist '("\\.rake?\\'" . enh-ruby-mode))https://github.com/dgutov/robe
Code navigation, documentation lookup and completion for Ruby
(add-hook 'enh-ruby-mode-hook 'robe-mode)
(add-hook 'robe-mode-hook 'ac-robe-setup)
(add-to-list 'auto-mode-alist '("\\.erb?\\'" . robe-mode))Start robe-mode with M-x robe-start.
Shortcuts:
C-c C-dLookup documentationM-.Jump to definitionTABAuto-completion throughauto-complete-mode
(add-hook 'enh-ruby-mode-hook 'auto-complete-mode)(add-hook 'enh-ruby-mode-hook
(lambda ()
(local-set-key (kbd "C-x C-e") 'ruby-send-line)))https://github.com/clojure-emacs/cider
Cider is short for The “Clojure Interactive Development Environment that Rocks for Emacs”. For good reasons, it is the most popular IDE for developing Clojure.
M-x cider-jack-inTo start REPLC-c C-kEvaluate current bufferC-c M-nChange ns in cider-nrepl to current nsC-c C-d C-dDisplay documentation for the symbol under pointC-c C-d C-aApropos search for arbitrary text across function names and documentation
C-↑, C-↓Cycle through REPL history.- More Cider shortcuts here.
Remove C-c C-p (cider-pprint-eval-last-sexp) from mode map in
favor of using Org mode style folding.
(add-hook 'cider-mode-hook (lambda ()
(define-key cider-mode-map (kbd "C-c C-p") nil)))Create a ~/.lein/profiles.clj file with:
{:user {:plugins [[cider/cider-nrepl "0.13.0-SNAPSHOT"]
[refactor-nrepl "2.2.0"]]
:dependencies [[org.clojure/tools.nrepl "0.2.12"]]}}When connecting to a repl, don’t pop to the new repl buffer.
(setq cider-repl-pop-to-buffer-on-connect nil)https://github.com/clojure-emacs/clj-refactor.el/
A collection of Clojure refactoring functions for Emacs.
Temporarily disable clj-refactor, because it throws an error on the
require.
;; (require 'clj-refactor)
;; (defun my-clojure-mode-hook ()
;; (clj-refactor-mode 1)
;; (yas-minor-mode 1) ; for adding require/use/import statements
;; ;; This choice of keybinding leaves cider-macroexpand-1 unbound
;; (cljr-add-keybindings-with-prefix "C-c C-m"))
;; (add-hook 'clojure-mode-hook #'my-clojure-mode-hook)clj-refactor enables refactorings like extracting functions (C-c
C-m ef). Find the list of available refactorings here.
Integrant configures, starts and manages a system and exposes a
lifecycle for it.
For REPL-driven development this adds one layer of indirection: When
starting a service through lein run (or bundled in a Docker
container), the system will already be started by Integrant. Without
having a ref to this system, we cannot stop it, we can only start
new systems. This means that reloading the code will only start new
systems, but not be able to halt the old one. The internal code from
Integrant relies on spawning a thread after initializing a system
through lein run and will not return until the process is done.
Therefore we cannot retrieve the system when running lein run.
When Emacs has a connection to a REPL for an Integrant based application, this snippet actually enables reloading of front and back-ends. The code doesn’t use cider internal functions for interacting with the REPL, because not all buffers might be connected (for example the CLJS buffers might not have a dedicated REPL themselves). Instead, it uses common Elisp.
(defun ok-cider-reload-integrant ()
(interactive)
(require 'seq)
(save-buffer)
(let ((cider-buffer (first (seq-filter '(lambda (buf)
(string-match "cider-repl" buf))
(mapcar 'buffer-name (buffer-list))))))
(if cider-buffer
(progn
(switch-to-buffer cider-buffer)
(insert "(in-ns 'dev)(integrant.repl/reset)")
(cider-repl-return)
(switch-to-buffer (other-buffer)))
(message "No Cider buffer!"))))
(add-hook 'clojure-mode-hook
'(lambda ()
(define-key
clojure-mode-map
(kbd "C-c r")
'ok-cider-reload-integrant)))Usage
When you want to reload the system, use C-c r. It will save your
current buffer and reload the system.
https://github.com/ananthakumaran/tide
Claim: TypeScript Interactive Development Environment for Emacs.
However, also JavaScript development gets big improvements with
tide-mode.
Tide is an alternative to Tern which also has great Emacs integration and which I have happily been using for years. However, tide works even better (in my experience).
For completion to work in a Node.js project, a jsconfig.json file
like this is required:
{
"compilerOptions": {
"target": "es6"
},
"exclude": [
"node_modules"
]
}If no project file is found, it’ll fall back to an inferred configuration.
Tide default shortcuts:
M-.Jump to the definition of the thing under the cursor.- =M-,= Brings you back to last place you were when you pressed M-..
(require 'rjsx-mode)
(define-key rjsx-mode-map (kbd "C-c C-r") 'tide-rename-symbol)
(define-key rjsx-mode-map (kbd "C-c C-d") 'tide-documentation-at-point)(defun setup-tide-mode ()
(interactive)
;; For bigger JS projects and intense tasks like =tide=references=
;; the default of 2s will time out
(setq tide-sync-request-timeout 10)
(tide-setup)
;; Increase sync request timeout for bigger projects
(flycheck-mode +1)
(setq flycheck-check-syntax-automatically '(save mode-enabled))
(eldoc-mode +1)
(tide-hl-identifier-mode +1))
(add-hook 'rjsx-mode-hook #'setup-tide-mode)https://github.com/redguardtoo/js-comint
Run a JavaScript interpreter in an inferior process window.
(require 'js-comint)(add-hook 'rjsx-mode-hook
(lambda ()
(local-set-key (kbd "C-x C-e") 'js-send-last-sexp)
(local-set-key (kbd "C-M-x") 'js-send-last-sexp-and-go)
(local-set-key (kbd "C-c b") 'js-send-buffer)
(local-set-key (kbd "C-c C-b") 'js-send-buffer-and-go)
(local-set-key (kbd "C-c l") 'js-load-file-and-go)))Flow is a static type checker for JavaScript.
Flow uses type inference to find bugs even without type annotations. It precisely tracks the types of variables as they flow through your program.
Flow is designed for JavaScript programmers. It understands common JavaScript idioms and very dynamic code.
Flow incrementally rechecks your changes as you work, preserving the fast feedback cycle of developing plain JavaScript.
(require 'flycheck-flow)
(add-hook 'javascript-mode-hook 'flycheck-mode)https://github.com/felipeochoa/rjsx-mode
This mode derives from js2-mode, extending its parser to support JSX syntax according to the official spec. This means you get all of the js2 features plus proper syntax checking and highlighting of JSX code blocks.
(add-to-list 'auto-mode-alist '("components\\/.*\\.js\\'" . rjsx-mode))(add-to-list 'auto-mode-alist '("\\.js\\'" . rjsx-mode))
(add-hook 'js-mode-hook 'js2-minor-mode)
(setq js2-highlight-level 3)
(setq js-indent-level 2)
;; Semicolons are optional in JS, do not warn about them missing
(setq js2-strict-missing-semi-warning nil)rainbow-mode is a minor mode for Emacs which displays strings
representing colors with the color they represent as background.
(add-hook 'prog-mode-hook 'rainbow-mode)https://github.com/netguy204/imp.el
Live JavaScript Coding Emacs/Browser: See your changes in the browser as you type
Enable the web server provided by simple-httpd: M-x httpd-start
Publish buffers by enabling the minor mode impatient-mode: M-x impatient-mode
And then point your browser to http://localhost:8080/imp/, select a buffer, and watch your changes appear as you type!
https://github.com/200ok-ch/counsel-jq
jq is a lightweight and flexible command-line JSON processor. This loads a counsel wrapper to quickly test queries and traverse a complex JSON structure whilst having live feedback.
Thanks to @branch14 of 200ok fame for starting with the initial function!
web-mode.el is an autonomous major-mode for editing web templates.
(add-to-list 'auto-mode-alist '("\\.html?\\'" . web-mode))
;; Ruby Templates
(add-to-list 'auto-mode-alist '("\\.erb?\\'" . web-mode))
;; Handlebars
(add-to-list 'auto-mode-alist '("\\.hbs?\\'" . web-mode))
;; JSON
(add-to-list 'auto-mode-alist '("\\.json?\\'" . web-mode))
(setq web-mode-enable-current-element-highlight t)
(setq web-mode-ac-sources-alist
'(("html" . (ac-source-words-in-buffer ac-source-abbrev))))p_slides is a static files only, dead simple way, to create semantic
slides. The slide content is markdown, embedded in a HTML file. When
opening a presentation.html file, enable markdown-mode.
(add-to-list 'auto-mode-alist '("presentation.html" . markdown-mode))Introducing a custom browser-reloading-mode. It’s a quick
implementation and not a real derived mode.
When enabling browser-reloading-mode for a specific buffer, whenever
this buffer is saved, a command-line utility reload_chromium.sh is
called. This in turn is a wrapper around xdotool with which a
reloading of the Chromium browser is triggered.
This is handy when working in a web environment that doesn’t natively
support hot-reloading (static web pages, for instance) and the page
has too much (dynamic) content to be displayed properly in
impatient-mode. I’m using it for example when working on a p_slides
slide deck.
(defun reload-chromium ()
(when enable-browser-reloading
(shell-command-to-string "reload_chromium.sh")))
(defun browser-reloading-mode ()
"Finds the open chromium session and reloads the tab"
(interactive)
;; When set, disable the local binding and therefore disable the mode
(if enable-browser-reloading
(setq enable-browser-reloading nil)
;; Otherwise create a local var and set it to True
(progn
(make-local-variable 'enable-browser-reloading)
(setq enable-browser-reloading t))))
;; By default, disable the guard against using `reload-chromium`
(setq enable-browser-reloading nil)
(add-hook 'after-save-hook #'reload-chromium)(require 'yaml-mode)
(add-to-list 'auto-mode-alist '("\\.yml$" . yaml-mode))
(add-hook 'yaml-mode-hook 'visual-line-mode)(add-hook 'markdown-mode-hook 'flyspell-mode)
(add-hook 'markdown-mode-hook 'outline-minor-mode)Unfortunately line breaks are semantic in some versions of markdown
(for example Github). So doing automatic line breaks would be harmful.
However, this leads to super long lines in many documents which is
unreadable. Therefore, always use visual-line-mode.
(add-hook 'markdown-mode-hook 'visual-line-mode)https://github.com/magit/magit
Magit is an interface to the version control system Git.
Create shortcut for Magit.
(global-set-key (kbd "C-x g") 'magit-status)Always sign commits with GPG
(setq magit-commit-arguments (quote ("--gpg-sign=137099B38E1FC0E9")))(add-hook 'with-editor-mode-hook 'evil-normal-state)https://github.com/magit/forge/
Work with Git forges from the comfort of Magit.
(with-eval-after-load 'magit
(require 'forge))Add 200ok gitlab instance to list of known forges
(with-eval-after-load 'forge
(add-to-list 'forge-alist
'("gitlab.200ok.ch"
"gitlab.200ok.ch/api/v4"
"gitlab.200ok.ch"
forge-gitlab-repository))
(add-to-list 'forge-alist
'("gitlab.switch.ch"
"gitlab.switch.ch/api/v4"
"gitlab.switch.ch"
forge-gitlab-repository)))Show assigned issues and PRs directly in the status buffer:
(with-eval-after-load 'magit
(magit-add-section-hook 'magit-status-sections-hook 'forge-insert-assigned-issues nil t)
(magit-add-section-hook 'magit-status-sections-hook 'forge-insert-assigned-pullreqs nil t))https://github.com/dandavison/magit-delta
Provides a minor mode which configures Magit to use delta when displaying diffs.
Enable magit-delta when running magit.
(add-hook 'magit-mode-hook (lambda () (magit-delta-mode +1)))Override the settings (~/.gitconfig) for delta, because the
line-numbers feature won’t work well with magit-delta (see
dandavison/magit-delta#13).
(setq magit-delta-delta-args
'("--24-bit-color" "always"
"--features" "magit-delta"
"--color-only"))https://github.com/bbatsov/projectile
Projectile is a project interaction library. For instance - finding
project files (C-c p f) or jumping to a new project (C-c p p).
Enable Projectile globally
(projectile-mode +1)
(define-key projectile-mode-map (kbd "C-c p") 'projectile-command-map)Disable projectile when using TRAMP. Otherwise Tramp will crawl to a halt.
(defadvice projectile-project-root (around ignore-remote first activate)
(unless (file-remote-p default-directory) ad-do-it))https://github.com/jacktasia/dumb-jump
“Jump to definition” with support for multiple programming languages that favors “just working”. This means minimal – and ideally zero – configuration with absolutely no stored indexes (TAGS) or persistent background processes.
Dumb Jump uses The Silver Searcher ag, ripgrep rg, or grep to find potential definitions of a function or variable under point. It uses a set of regular expressions based on the file extension, or major-mode, of the current buffer.
(dumb-jump-mode)
(setq dumb-jump-selector 'ivy)The one important shortcut is C-M-g which attempts to jump to the
definition of the thing under point.
Automatically format code for different languages and frameworks.
This implements the interactive function autoformat which is a thin
wrapper around command-line based code autoformatters which it
utilizes through a strategy pattern.
To add a new language/framework, the only required change is to add
the respective command-line tool configuration into a separate
strategy function. It is trivial to do if the new language/framework
has a command-line tool which takes code into stdin and formats it
to stdout.
It’s possible to install the dependencies locally, so that the setup doesn’t impose dependencies on team members - or they can be installed through the respective packages managers (npm/yarn) to enforce code guidelines.
This requires prettier, @prettier/plugin-ruby and
prettier-eslint-cli to be installed:
npm install -g prettier-eslint-cli prettier @prettier/plugin-rubyLinting JavaScript with eslint happens automatically through flycheck. eslint just needs to be installed.
npm install -g eslint(defun autoformat ()
"Automatically format current buffer."
(interactive)
(if (derived-mode-p 'clojure-mode)
(autoformat-clojure-function)
(let ((eslint-path (concat (projectile-project-root)
".eslintrc.yml"))) ; could be .json or .yml
(autoformat-with
(cond ((derived-mode-p 'web-mode) 'autoformat-html-command)
((derived-mode-p 'css-mode) 'autoformat-css-command)
((derived-mode-p 'nxml-mode) 'autoformat-xml-command)
((derived-mode-p 'json-mode) 'autoformat-json-command)
((derived-mode-p 'sass-mode) 'autoformat-sass-command)
((derived-mode-p 'yaml-mode) 'autoformat-yaml-command)
((derived-mode-p 'enh-ruby-mode) 'autoformat-ruby-command)
;; JS projects with eslint config
((and (file-exists-p eslint-path)
(derived-mode-p 'js2-mode))
'autoformat-prettier-eslint-command)
((derived-mode-p 'js2-mode) 'autoformat-javascript-command))))))
(defun autoformat-with (strategy)
"Automatically format current buffer using STRATEGY."
(let ((p (point))
(s (window-start)))
;; Remember the current position
(save-mark-and-excursion
;; Call prettier-eslint binary with the contents of the current
;; buffer
(shell-command-on-region
(point-min) (point-max)
(funcall strategy)
;; Write into a temporary buffer
(get-buffer-create "*Temp autoformat buffer*")
;; Replace the current buffer with the output of
;; the =autoformat strategy= output
t
;; If the =autoformat strategy= returns an error, show it in a
;; separate error buffer
(get-buffer-create "*replace-errors*")
;; Automatically show error buffer
t))
;; Return to the previous point and scrolling position (the point
;; was lost, because the whole buffer got replaced.
(set-window-start (selected-window) s)
(goto-char p)))
(defun autoformat-clojure-function ()
"Cider function to format Clojure buffer."
(indent-buffer)
;; (cider-format-buffer)
)
(defun autoformat-ruby-command ()
"CLI tool to format Ruby."
"prettier --parser ruby")
(defun autoformat-javascript-command ()
"CLI tool to format Javascript."
"prettier --parser babel")
(defun autoformat-html-command ()
"CLI tool to format HTML."
"prettier --parser html")
(defun autoformat-css-command ()
"CLI tool to format CSS."
"prettier --parser css")
(defun autoformat-xml-command ()
"CLI tool to format XML."
"xmllint -format -")
(defun autoformat-sass-command ()
"CLI tool to format SASS."
"prettier --parser sass")
(defun autoformat-json-command ()
"CLI tool to format JSON."
"prettier --parser json")
(defun autoformat-yaml-command ()
"CLI tool to format YAML."
"prettier --parser yaml")
(defun autoformat-prettier-eslint-command ()
"CLI tool to format Javascript with .eslintrc.json configuration."
(concat "npx prettier-eslint --stdin --eslint-config-path="
;; Hand over the path of the current projec
(concat
(projectile-project-root)
".eslintrc.yml")
" --stdin-filepath="
(buffer-file-name)
" --parser babel"))Shortcut
(setq ok-autoformat-modes (list 'web-mode
'css-mode
'json-mode
'clojure-mode
'sass-mode
'enh-ruby-mode
'yaml-mode
'js2-mode
'rjsx-mode))
(dolist (mode ok-autoformat-modes)
(evil-leader/set-key-for-mode mode "f" 'autoformat))Demo
I don’t want to autoformat for every project, because I might not be
the primary owner of the code (that accounts for consulting projects).
However, there are projects where I actually do want to run
autoformat every time. That is on projects with strict formatting
requirements.
NB: The overhead of prettier + eslint is about 1.3s on a maxed out X1 Carbon 6th gen.
;; Define list of projects to autoformat
(setq ok-autoformat-projects (list "src/200ok/organice"))
(add-hook 'before-save-hook
'(lambda()
;; Check if the current directory matches the list of
;; projects that are to be autoformatted.
(if (seq-some '(lambda (e)
(numberp e))
(mapcar '(lambda (dir)
(string-match dir (projectile-project-root)))
ok-autoformat-projects) )
(when (or
(derived-mode-p 'js2-mode)
(derived-mode-p 'css-mode)
(derived-mode-p 'sass-mode)
(derived-mode-p 'yaml-mode))
(autoformat)))))NB: This could be a good alternative solution. However, scoping to the local directory doesn’t work like this. Maybe I’m doing it wrong, maybe dir-locals just shouldn’t be used outside of setting variables.
Call autoformat on every save for specific projects
those projects, you can enable autoformat by creating a
.dir-locals.el file in your home directory.
(("src"
(nil .
((eval add-hook 'before-save-hook '(lambda()
(autoformat)))))))
The first node “src/” is the directory, while the second node is the mode-name, or “nil” to apply to every mode.
EditorConfig helps maintain consistent coding styles for multiple developers working on the same project across various editors and IDEs. I’m an Emacs guy, however, when in an heterogeneous team, it does make sense to adhere to some commonly shared definitions.
With this plugin, if there is an .editorconfig in a project, the
settings in this file will trump my personal config.
(editorconfig-mode 1)https://github.com/purcell/emacs-hcl-mode
Major mode for Hashicorp Configuration Language. I use it for Terraform.
(add-to-list 'auto-mode-alist '("\\.tf" . hcl-mode))(add-to-list 'auto-mode-alist '("\\.drl\\'" . java-mode))https://github.com/natrys/whisper.el
I installed whisper.ccp manually on the commandline, though whisper.el supports automatic installation.
I benchmarked different models against each other. The “base” model is quite fast and has good results. “tiny” has worse results and starting from “small”, the computation time goes way up.
Also, I’ve benchmarked whisper.cpp streaming vs whisper.el and the latter is far superior.
Note that setting the whisper-language to ‘auto’ implies that one
recording can only have one language. Giving it multiple sentences
in different languages will not return a happy result.
(quelpa '(whisper :fetcher git :url "https://github.com/natrys/whisper.el.git"))
(setq whisper-install-directory "~/src"
whisper-model "base-q8_0"
whisper-language "auto"
whisper-use-threads 10
whisper-translate nil)
(define-key global-map (kbd "C-x R") 'whisper-run)With an OS keybinding of Shift + Alt + r, I run emacsclient -c
--eval '(start-whisper-recording) (I use xbindkeys for that).
(defun start-whisper-recording ()
"Interactively start a new whisper recording."
(interactive)
(switch-to-buffer "*whisper-recording*")
(self-insert-command 1)
(whisper-run))
Outline-based notes management and organizer. It is an outline-mode for keeping track of everything.
Next to Emacs Org mode, I use organice (https://github.com/200ok-ch/organice/) to manage my Org files on the go and to collaborate with non-Emacs users.
(setq org-directory "~/Dropbox/org/")Configure org-display-inline-images width so that they always fit.
My screenshots would otherwise overflow, because I’m on a HiDPI
display.
(setq org-image-actual-width 720)Allow ‘a.’, ‘A.’, ‘a)’ and ‘A) as list elements:
(setq org-list-allow-alphabetical t)
The default is 14 days ahead. That’s way too much for me. If a task needs a lot of work ahead of the deadline, I’ll set a custom reminder date or an additional schedule.
(setq org-deadline-warning-days 3)(require 'org)
; languages for org-babel support
(org-babel-do-load-languages
'org-babel-load-languages
'(
(shell . t)
(dot . t)
(js . t)
(ruby . t)
))
(add-hook 'org-mode-hook 'auto-fill-mode)
(add-hook 'org-mode-hook 'flyspell-mode)
(evil-leader/set-key
"a" 'org-archive-subtree-default)
;; Allow =pdflatex= to use shell-commands. This will allow it to use
;; =pygments= as syntax highlighter for exports to PDF.
(setq org-latex-pdf-process
'("pdflatex -shell-escape -interaction nonstopmode -output-directory %o %f"
"pdflatex -shell-escape -interaction nonstopmode -output-directory %o %f"
"pdflatex -shell-escape -interaction nonstopmode -output-directory %o %f"))
;; Alternatively use =xelatex=. Required for documents where I want to use ttf fonts.
;; (setq org-latex-pdf-process
;; '("xelatex -shell-escape -interaction nonstopmode -output-directory %o %f"
;; "xelatex -shell-escape -interaction nonstopmode -output-directory %o %f"
;; "xelatex -shell-escape -interaction nonstopmode -output-directory %o %f"))
;; Include =minted= package for LaTeX exports
(add-to-list 'org-latex-packages-alist '("" "minted"))
(setq org-latex-listings 'minted)
;; Don’t ask every time when executing a code block.
(setq org-confirm-babel-evaluate nil)
imenu would normally only index two levels - since I run deeply
nested documents, go up to six levels.
(setq org-imenu-depth 6)When a document is folded and the user searches and finds with
imenu, the body of the folded header is revealed, so that the search
result can actually be seen.
(defun ok-imenu-show-entry ()
"Reveal content of header."
(cond
((and (eq major-mode 'org-mode)
(org-at-heading-p))
(org-show-entry)
(org-reveal t))
((bound-and-true-p outline-minor-mode)
(outline-show-entry))))
(add-hook 'imenu-after-jump-hook 'ok-imenu-show-entry)(require 'ox-latex)
(add-to-list 'org-latex-classes
'("scrartcl"
"\\documentclass{scrartcl}"
("\\section{%s}" . "\\section*{%s}")))(require 'ox-latex)
(add-to-list 'org-latex-classes
'("tuftehandout"
"\\documentclass{tufte-handout}
\\usepackage{color}
\\usepackage{amssymb}
\\usepackage{amsmath}
\\usepackage{gensymb}
\\usepackage{nicefrac}
\\usepackage{units}"
("\\section{%s}" . "\\section*{%s}")
("\\subsection{%s}" . "\\subsection*{%s}")
("\\paragraph{%s}" . "\\paragraph*{%s}")
("\\subparagraph{%s}" . "\\subparagraph*{%s}")))
Align tags to the far right of the screen. -77 would be good for a
smaller 80 character terminal.
(setq org-tags-column -100)- Todos which land in
Inbox - Expenses which land in
Inbox - Code Snippets which land in
snippets.org - Shopping Items which get appended to the Shopping List in
things.org - Media Entries (watch/read later items) that land in
media.org
Org Capture Templates are explained here, Org Template expansion here.
;; Set org-capture inbox
(setq org-default-notes-file (concat org-directory "inbox.org"))
(define-key global-map "\C-cc" 'org-capture)
(setq things-file (expand-file-name "things.org" org-directory))
(setq reference-file (expand-file-name "reference.org" org-directory))
(setq media-file (expand-file-name "media.org" org-directory))
(defun get-domainname (address)
"Extract TLD (without country) from ADDRESS.
Example: Return '200ok' from 'alain@200ok.ch'."
(replace-regexp-in-string
"\-" "_"
(nth 0
(split-string (nth 1 (split-string address "@"))
"\\."))))
(defun from-name (fromname fromaddress from)
"Return the first non-empty match for FROMNAME FROMADDRESS and FROM."
(nth 0
(seq-filter '(lambda (s)
(not (string-empty-p s)))
(list fromname fromaddress from))))
(setq org-capture-templates
`(("t" "Todo" entry (file+olp things-file "Inbox" "Tasks")
"* TODO %?\n %U\n %i\n %a" :prepend t)
("w" "Waiting" entry (file+olp things-file "Waiting")
"* WAITING %?\n %U\n %i\n %a")
;; Creates an expense line for the date of the mail, prompts
;; for the amount and currency
("e" "Expense" table-line (file+olp things-file "Inbox" "Expenses")
"|%(org-insert-time-stamp (org-read-date nil t \"%:date\") nil t) | %(from-name \"%:fromname\" \"%:fromaddress\" \"%:from\")| [[%:link][Mail]] | %^{amount} | %^{currency|usd|chf|eur} | | | %^{scope|200ok-alain|200ok-joint|lambda} |")
("m" "Mail" entry (file+olp things-file "Inbox" "Mails")
;; Creates "* TODO <2019-05-01 Wed> FromName [[mu4e:msgid:uuid][MessageSubject]] :200ok:
;; Therefore Emails can be properly:
;; - Used as tasks
;; - Attributed tags
;; - Ordered by priority
;; - Scheduled
;; - etc
"* TODO %(org-insert-time-stamp (org-read-date nil t \"%:date\") nil t) %(from-name \"%:fromname\" \"%:fromaddress\" \"%:from\") %a \t :%(get-domainname \"%:toaddress\"):")
("d" "Daily focus" plain (file+olp things-file "Inbox" "Daily")
(file "~/.emacs.d/org-templates/daily_focus.org"))
("M" "Meeting minutes" plain (file+olp things-file "Inbox" "Tasks")
(file "~/.emacs.d/org-templates/minutes.org"))
("s" "Code Snippet" entry (file+headline "~/src/200ok/knowledge/README.org" "Snippets")
;; Prompt for tag and language
"* %?\t%^g\n#+BEGIN_SRC %^{language}\n%i\n#+END_SRC")
("S" "Shopping" entry (file+olp "~/Dropbox/org/shared_with_monika/shared_alain_and_monika.org" "@Shopping")
"* TODO %?\n %U\n %i\n %a" :prepend t)
("l" "Logbook entry" entry (file+olp reference-file "Logbook" ,(format-time-string "%Y"))
"* %?\n %U\n %i\n %a" :prepend t)
;; NOTE: This would result in a cleanlier logbook, but
;; organice does not support it, yet.
;; ("l" "Logbook entry" entry (file+olp+datetree reference-file "Logbook")
;; "* %?\n %U\n %i\n %a")
("p" "password" entry (file+headline "~/Dropbox/org/vault/primary.org.gpg" "Passwords")
;; Prompt for name
"* %^{name}
:PROPERTIES:
:username: %^{username}
:password: %(generate-password-non-interactive)
:url: %^{url}
:END:")
("u" "URL / Media Inbox" entry (file+olp media-file "Inbox")
"* %?\n%U\nURL: \n" :prepend t)
;; Legacy style
;; ("u" "URL" entry
;; (file+datetree media-file)
;; "* %?\nURL: \nEntered on %U\n")
))If they don’t, then the result will look like:
* Tasks ** TODO Foo from capture-template* This should be on the next line
This obviously breaks the structure of the Org file. Here’s a fix:
(defun add-newline-at-end-if-none ()
"Add a newline at the end of the buffer if there isn't any."
(save-excursion
(save-restriction
(goto-char (1- (point-max)))
(if (not (looking-at "\n\n"))
(progn
(goto-char (point-max))
(insert "\n"))))))
(add-hook 'org-capture-before-finalize-hook 'add-newline-at-end-if-none)Enable the <s TAB syntax for structure templates.
(if (version<= "27.1" emacs-version)
(require 'org-tempo))A lightweight implementation of the Pomodoro Technique is implemented through customizing Org mode. These are the commands:
ok-pomodoro-startok-pomodoro-cancelok-pomodoro-breakok-pomodoro-reset: Reset the completed and cancelled counters.
It sets the following stats:
ok-pomodoro-completedok-pomodoro-cancelled
Alternatively, if you do not want to manually start a pomodoro, you
can hook into the Org mode clocking mechanism. When
ok-pomodoro-auto-clock-in is set, for every Clock that is started
(C-c C-x C-i) an automatic Timer is scheduled to 25min. After these
25min are up, a “Time to take a break!” message is played and a pop-up
notification is shown.
The timer is not automatically stopped on clocking out, because clocking in should still work on new tasks without resetting the Pomodoro.
The timer can manually be stopped with M-x org-timer-stop.
A break can be started with M-x pomodoro-break. A pomodoro can also
manually be started without clocking in via M-x pomodoro-start.
;; Configure primary org pomodoro buffer to which the timers will get
;; attached to.
(setq ok-pomodoro-buffer "things.org")
(load "~/.emacs.d/org-pomodoro")I use two workflow sets:
- One for TODOs which can either be TODO or DONE
- Another for tasks that I am WAITING for something to happen or which are in PROGRESS
Additionally I sometimes use the keywords PROJECT and AGENDA to denote special bullets that I might tag (schedule/deadline) in the agenda. These keywords give semantics to those bullets.
Note that “|” denotes a semantic state change that is reflected in a different color. Putting the pipe at the end means that all states prior should be shown in the same color.
(setq org-todo-keywords
'((sequence "TODO" "|" "DONE")
(sequence "PROJECT" "AGENDA" "|" "MINUTES")
(sequence "WAITING" "|" "PROGRESS")))When using a clock table, org will by default sum up the time in perfectly human readable terms like this:
| Headline | Time |
|---|---|
| Total time | 1d 1:03 |
For easy calculations (I don’t want to parse our hours, weeks and what
not), I do prefer that the summation is done only in fractional hours.
org-duration-format is very powerful, the help is helpful to
understand the syntax and options.
(setq org-duration-format '(("h" . t) (special . 2)))This will render the same time as above as:
| Headline | Time |
|---|---|
| Total time | 25.05 |
(load-library "find-lisp")
(defun set-org-agenda-files ()
"Set different org-files to be used in `org-agenda`."
(setq org-agenda-files (flatten-list
(list (concat org-directory "things.org")
(concat org-directory "reference.org")
(concat org-directory "media.org")
(concat org-directory "shared_with_monika/shared_alain_and_monika.org")
"~/src/200ok/admin/THINGS.org"
(find-lisp-find-files "~/src/200ok/admin/pm/" "^pm.*\.org$")))))
(set-org-agenda-files)
(global-set-key "\C-cl" 'org-store-link)
(defun things ()
"Open main 'org-mode' file and start 'org-agenda' for today."
(interactive)
(find-file (concat org-directory "things.org"))
(set-org-agenda-files)
(org-agenda-list)
(org-agenda-day-view)
(shrink-window-if-larger-than-buffer)
(other-window 1))For a proficient GTD workflow, it is important to be able to refile
one item from one list easily to another (for example when processing
an inbox). Orgmode makes this easy with the refile command C-c C-w.
Define where the refiling can happen (the default is to the local buffer):
(setq org-refile-targets (quote ((nil :maxlevel . 9) ;; local buffer
(org-agenda-files :maxlevel . 4))))(setq calendar-week-start-day 1)
(setq calendar-intermonth-text
'(propertize
(format "%2d"
(car
(calendar-iso-from-absolute
(calendar-absolute-from-gregorian (list month day year)))))
'font-lock-face 'font-lock-warning-face))
(setq calendar-intermonth-header
(propertize "CW"
'font-lock-face 'font-lock-keyword-face))(setq org-cycle-separator-lines 0)https://github.com/pashky/restclient.el
HTTP REST client tool for emacs
https://github.com/alf/ob-restclient.el
An extension to restclient.el for emacs that provides org-babel support.
(org-babel-do-load-languages
'org-babel-load-languages
'((restclient . t)))https://github.com/abo-abo/org-download
(require 'org-download)
(add-hook 'dired-mode-hook 'org-download-enable)
(setq org-download-heading-lvl nil)Don’t save org-download images nested according to header, save them flat.
(setq-default org-download-heading-lvl nil)Save org-download images into the “images” directory.
(setq-default org-download-image-dir (concat org-directory "images"))https://orgmode.org/manual/Tracking-your-habits.html
Show habits outside of today’s agenda view:
(setq org-habit-show-habits-only-for-today nil)https://github.com/karthink/gptel
(setq gptel-default-mode 'org-mode)
(setq gptel-model "gpt-4-turbo-preview")
(gptel-make-ollama "Ollama"
:host "localhost:11434"
:stream t
:models '("codellama"))
(gptel-make-kagi "Kagi"
:key kagi-key)
(global-set-key (kbd "M-G") 'gptel-menu)https://github.com/rksm/org-ai
General setup:
(require 'org-ai)
(add-hook 'org-mode-hook #'org-ai-mode)The OpenAI API key is in the ~/.authinfo file.
Integrate “ai” snippet in Org mode:
(org-ai-install-yasnippets)
(setq org-ai-default-chat-model "gpt-3.5-turbo")
;; (setq org-ai-default-chat-model "gpt-4")
(add-hook 'org-mode-hook #'yas-minor-mode)Typing “ai TAB” will create a block like this:
[SYS]: You are a helpful assistant. [ME]:
Bring back ‘clear cell’ shortcut which used to be the default binding, but was removed in the 9.5 release.
(define-key org-mode-map (kbd "C-c SPC") #'org-table-blank-field)Store a link to a file when attaching it. So after adding an
attachment you can just use C-c C-l to insert the link.
(setq org-attach-store-link-p 'attached)(eval-after-load "org"
'(require 'ox-md nil t))Something similar to `org-narrow-to-block`, but for a dynamic number of elements. This is useful when looking at a ‘Next’ entry in a GTD file and not wanting to be overwhelmed by the whole list, for example.
(defun org-narrow-to-next-n-subheaders (n)
"Narrow the buffer to the next N subheaders."
(interactive "nNumber of subheaders: ")
(save-excursion
(org-back-to-heading t)
(let ((start (point))
end)
(forward-line)
(while (and (> n 0) (not (eobp)))
(when (org-at-heading-p)
(setq n (1- n)))
(forward-line))
(setq end (point))
(narrow-to-region start end))))
This is a work-in-progress, but already working.
Important commands are:
M-x appt-check: At any point, re-display current appointment remindersM-x apt-delete: Delete obsolete appointment reminders- Through Org, they only get added, but not deleted. Hence, when changing the reminder time, there will be two appointments in the queue.
https://orgmode.org/worg/org-faq.html#automatic-reminders
https://orgmode.org/list/13222.1201471868@gamaville.dokosmarshall.org/
;; Show first notification 2h before event
(setq appt-message-warning-time (* 60 2))
;; Then, have a reminder every 30min
(setq appt-display-interval 30)
;; Don't display the 'time to appointment in minutes' in the modeline
(setq appt-display-mode-line nil)Option 1
;; ; Use appointment data from org-mode
;; (defun my-org-agenda-to-appt ()
;; (interactive)
;; (setq appt-time-msg-list nil)
;; (org-agenda-to-appt))
;; ; Update alarms when...
;; ; (1) ... Starting Emacs
;; (my-org-agenda-to-appt)
;; ; (2) ... Everyday at 12:05am (useful in case you keep Emacs always on)
;; (run-at-time "12:05am" (* 24 3600) 'my-org-agenda-to-appt)
;; ; (3) ... When TODO.txt is saved
;; (add-hook 'after-save-hook
;; '(lambda ()
;; (if (string= (buffer-file-name) (concat (getenv "HOME") "/Dropbox/org/things.org"))
;; (my-org-agenda-to-appt))))
;; ; Display appointments as a window manager notification
;; (setq appt-disp-window-function 'my-appt-display)
;; (setq appt-delete-window-function (lambda () t))
;; (setq my-appt-notification-app (concat (getenv "HOME") "/bin/appt-notification"))
;; (defun my-appt-display (min-to-app new-time msg)
;; (if (atom min-to-app)
;; (start-process "my-appt-notification-app" nil my-appt-notification-app min-to-app msg)
;; (dolist (i (number-sequence 0 (1- (length min-to-app))))
;; (start-process "my-appt-notification-app" nil my-appt-notification-app (nth i min-to-app) (nth i msg)))))
Alternative:
(defadvice org-agenda-redo (after org-agenda-redo-add-appts)
"Pressing `r' on the agenda will also add appointments."
(progn
(defvar appt-time-msg-list nil)
(org-agenda-to-appt)))
(ad-activate 'org-agenda-redo)
(progn
(appt-activate 1)
(setq appt-display-format 'window)
(setq appt-disp-window-function (function my-appt-disp-window))
(defun my-appt-disp-window (min-to-app new-time msg)
(call-process (concat (getenv "HOME") "/bin/appt-notification") nil 0 nil min-to-app msg new-time)))
(add-hook 'after-save-hook
'(lambda ()
(when (seq-contains org-agenda-files (s-replace "/home/munen" "~" (buffer-file-name)))
(org-agenda-to-appt))))https://github.com/vedang/pdf-tools, forked from https://github.com/politza/pdf-tools
PDF Tools is, among other things, a replacement of DocView for PDF files. The key difference is that pages are not pre-rendered by e.g. ghostscript and stored in the file-system, but rather created on-demand and stored in memory.
PDF Tools for me is - hands down - the best PDF viewer! It’s not an excuse to do even more within Emacs.
When using evil-mode and pdf-tools and looking at a zoomed PDF, it
will blink, because the cursor blinks. This configuration disables
this whilst retaining the blinking cursor in other modes.
(evil-set-initial-state 'pdf-view-mode 'emacs)
(add-hook 'pdf-view-mode-hook
(lambda ()
(set (make-local-variable 'evil-emacs-state-cursor) (list nil))))Elfeed is an extensible web feed reader for Emacs, supporting both Atom and RSS.
(require 'elfeed)
(require 'elfeed-goodies)
(elfeed-goodies/setup)Automatic word-wrap for elfeed entries:
(add-hook 'elfeed-show-mode-hook 'visual-line-mode)Use VIM style scrolling in elfeed entries:
(define-key elfeed-show-mode-map (kbd "C-e") 'evil-scroll-line-down)
(define-key elfeed-show-mode-map (kbd "C-y") 'evil-scroll-line-up)(load "~/.emacs.d/elfeed-feeds.el")Editing text areas in browsers can be quite tedious for the lack of a good editor. Luckily, there’s good extensions for both Chrome/Chromium and Firefox to have a live binding to an Emacs session.
There is a good Emacs package called Atomic Chrome which is similar to Edit with Emacs, but has some advantages as below with the help of websockets:
- The input on Emacs is reflected to the browser instantly and continuously.
- You can use both the browser and Emacs at the same time. They are updated to the same content bi-directionally.
The name “Atomic Chrome” is a bit misleading, because it actually supports the “GhostText” protocol which allows it to be used with Firefox, as well.
On Firefox, I’m using the GhostText addon. On Chromium, I’m using
the AtomicChrome extension. GhostText is also available for Chrome,
but it doesn’t work for me which is a non-issue, because both plugins
work just the same way: Enter a textarea, hit a button, Emacs opens
up, type the text, end the session with C-c C-c.
(require 'atomic-chrome)
;; Handle if there is an Emacs instance running which has the server already
;; started
(ignore-errors
;; Start the server
(atomic-chrome-start-server))Note: I opened a PR against AtomicChrome which will make the safe-guard obsolete.
Default mode
(setq atomic-chrome-default-major-mode 'markdown-mode)Copy to clipboard
Some websites have aggressive JS which triggers when text is entered
to a textarea which can lead to bugs in combination with AtomicChrome.
There’s some websites where I regularly lose the text that’s entered.
While I’m editing, the textarea is updating, but on C-c C-c, Emacs
closes and the textarea is empty. For such cases, I’m using this
simple workaround: Copy the contents to clipboard just before closing
Emacs. So if the contents are lost, I can just paste the text into the
textarea. Not a perfect solution, but this happens seldomly enough,
that it’s good enough for me.
(advice-add 'atomic-chrome-close-current-buffer
:before
'(lambda()
(clipboard-kill-ring-save (point-min) (point-max))))Writing and reading mail is inherently a text-based workflow. Yes, there’s HTML mails and attachments, but at the core Email is probably the place where many people write and consume the most text. To utilize the best text-processing program available makes a lot of sense.
When combined with other powerful features of Emacs (such as Org mode for organizing mails into projects and todos), processing mails within Emacs not only makes a lot of sense, but becomes a powerhouse.
Emacs has many options for MTAs. I’m using MU4E which is a little
similar to using mutt with notmuch. As SMTP, I’m using the built-in
smtpmail Emacs package.
MU works on a local Maildir folder. For synchronization offlineimap is used. Install:
- Debian:
apt-get install offlineimap - macOS:
brew install offlineimap
For MU4E to work, install MU and MU4E:
- Debian:
apt-get install mu4e - Guix:
guix package -i mu - macOS:
brew install mu --with-emacs
For starttls to work when sending mail, install gnutls:
- Debian:
apt-get install gnutls-bin - macOS:
brew install gnutls
"mu"
- Configure
.offlineimaprcfile for IMAP - Configure
.authinfofile for SMTP - https://www.emacswiki.org/emacs/GnusAuthinfo
Tell Emacs where to find the encrypted .authinfo file.
(setq auth-sources
'((:source "~/.authinfo.gpg")))
To open PDFs within Mu4e with Emacs, then there’s one thing to
configure. Mu4e uses xdg-open to chose the app to open any mime type.
Configure xdg-open to use Emacs in .local/share/applications/mimeapps.list:
xdg-mime default emacs.desktop application/pdf
mu setup (Initializing the message store):
https://www.djcbsoftware.nl/code/mu/mu4e/Initializing-the-message-store.html
mu init --my-address=alain.lafon@dispatched.ch --my-address=alain@200ok.ch --my-address=support@200ok.ch --my-address=lafo@zhaw.ch --my-address=alain@zen-tempel.ch --my-address=preek@dispatched.ch --maildir=~/Maildir(require 'mu4e)
;; Not required from 1.8.7-2, it's already included
;; (require 'org-mu4e)
(setq send-mail-function 'smtpmail-send-it)
;; Default account on startup
(setq user-full-name "Alain M. Lafon"
mu4e-sent-folder "/200ok/INBOX.Sent"
mu4e-drafts-folder "/200ok/INBOX.Drafts"
mu4e-trash-folder "/200ok/INBOX.Trash")
(setq smtpmail-debug-info t
message-kill-buffer-on-exit t
;; Custom script to run offlineimap in parallel for multiple
;; accounts as discussed here:
;; http://www.offlineimap.org/configuration/2016/01/29/why-i-m-not-using-maxconnctions.html
;; This halves the time for checking mails for 4 accounts for me
;; (when nothing has to be synched anyway)
mu4e-get-mail-command "offlineimap_parallel.sh"
mu4e-attachment-dir "~/Dropbox/org/files/inbox")
;; show full addresses in view message (instead of just names)
;; toggle per name with M-RET
(setq mu4e-view-show-addresses t)
;; Do not show related messages by default (toggle with =W= works
;; anyway)
(setq mu4e-headers-include-related nil)
;; Alternatives are the following, however in first tests they
;; show inferior results
;; (setq mu4e-html2text-command "textutil -stdin -format html -convert txt -stdout")
;; (setq mu4e-html2text-command "html2text -utf8 -width 72")
;; (setq mu4e-html2text-command "w3m -dump -T text/html")
(defvar my-mu4e-account-alist
'(("200ok"
(user-full-name "Alain M. Lafon")
(mu4e-compose-signature "200ok GmbH\nCEO\n\nalain@200ok.ch\n+41 76 405 05 67\nhttps://200ok.ch/\n\nBook an appointment with me: https://200ok.ch/calendar/alain.html \n\norganice is the best way to get stuff done: https://organice.200ok.ch")
(mu4e-compose-signature-auto-include t)
(mu4e-sent-folder "/200ok/INBOX.Sent")
(mu4e-drafts-folder "/200ok/INBOX.Drafts")
(mu4e-trash-folder "/200ok/INBOX.Trash")
(user-mail-address "alain@200ok.ch")
(smtpmail-default-smtp-server "mail.your-server.de")
(smtpmail-local-domain "200ok.ch")
(smtpmail-smtp-user "munen@200ok.ch")
(smtpmail-smtp-server "mail.your-server.de")
(smtpmail-stream-type starttls)
(smtpmail-smtp-service 587))
("200ok-support"
(user-full-name "200ok Support")
(mu4e-compose-signature "200ok GmbH\nCEO\n\nalain@200ok.ch\n+41 76 405 05 67\nhttps://200ok.ch/\n\nBook an appointment with me: https://200ok.ch/calendar/alain.html \n\norganice is the best way to get stuff done: https://organice.200ok.ch")
(mu4e-compose-signature-auto-include t)
(mu4e-sent-folder "/200ok-support/INBOX.Sent")
(mu4e-drafts-folder "/200ok-support/INBOX.Drafts")
(mu4e-trash-folder "/200ok-support/INBOX.Trash")
(user-mail-address "support@200ok.ch")
(smtpmail-default-smtp-server "mail.your-server.de")
(smtpmail-local-domain "200ok.ch")
(smtpmail-smtp-user "support@200ok.ch")
(smtpmail-smtp-server "mail.your-server.de")
(smtpmail-stream-type starttls)
(smtpmail-smtp-service 587))
("zen-tempel"
(user-full-name "Munen Alain M. Lafon")
(mu4e-compose-signature "Lambda Zen Tempel\n\nalain@zen-temple.net\n+41 76 405 05 67\n\nhttps://zen-temple.net/")
(mu4e-compose-signature-auto-include t)
(mu4e-sent-folder "/zen-tempel/INBOX.Sent")
(mu4e-drafts-folder "/zen-tempel/INBOX.Drafts")
(mu4e-trash-folder "/zen-tempel/INBOX.Trash")
(user-mail-address "alain@zen-tempel.ch")
(smtpmail-default-smtp-server "mail.your-server.de")
(smtpmail-local-domain "zen-tempel.ch")
(smtpmail-smtp-user "alain@zen-tempel.ch")
(smtpmail-smtp-server "mail.your-server.de")
(smtpmail-stream-type starttls)
(smtpmail-smtp-service 587))
("dispatched"
(user-full-name "Alain M. Lafon")
(mu4e-compose-signature-auto-include nil)
(mu4e-sent-folder "/dispatched/INBOX.Sent")
(mu4e-drafts-folder "/dispatched/INBOX.Drafts")
(mu4e-trash-folder "/dispatched/INBOX.Trash")
(user-mail-address "alain.lafon@dispatched.ch")
(smtpmail-default-smtp-server "mail.your-server.de")
(smtpmail-local-domain "dispatched.ch")
(smtpmail-smtp-user "munen@dispatched.ch")
(smtpmail-smtp-server "mail.your-server.de")
(smtpmail-stream-type starttls)
(smtpmail-smtp-service 587))))
;; Whenever a new mail is to be composed, change all relevant
;; configuration variables to the respective account. This method is
;; taken from the MU4E documentation:
;; http://www.djcbsoftware.nl/code/mu/mu4e/Multiple-accounts.html#Multiple-accounts
(defun my-mu4e-set-account ()
"Set the account for composing a message."
(let* ((account
(if mu4e-compose-parent-message
(let ((maildir (mu4e-message-field mu4e-compose-parent-message :maildir)))
(string-match "/\\(.*?\\)/" maildir)
(match-string 1 maildir))
(completing-read (format "Compose with account: (%s) "
(mapconcat #'(lambda (var) (car var))
my-mu4e-account-alist "/"))
(mapcar #'(lambda (var) (car var)) my-mu4e-account-alist)
nil t nil nil (caar my-mu4e-account-alist))))
(account-vars (cdr (assoc account my-mu4e-account-alist))))
(if account-vars
(mapc #'(lambda (var)
(set (car var) (cadr var)))
account-vars)
(error "No email account found"))))
(add-hook 'mu4e-compose-pre-hook 'my-mu4e-set-account)
(add-hook 'mu4e-compose-mode-hook 'visual-line-mode)
(setq mu4e-refile-folder
(lambda (msg)
(cond
((string-match "^/dispatched.*"
(mu4e-message-field msg :maildir))
"/dispatched/INBOX.Archive")
((string-match "^/zen-tempel.*"
(mu4e-message-field msg :maildir))
"/zen-tempel/INBOX.Archive")
((string-match "^/200ok.*"
(mu4e-message-field msg :maildir))
"/200ok/INBOX.Archive")
((string-match "^/200ok-support.*"
(mu4e-message-field msg :maildir))
"/200ok-support/INBOX.Archive")
((string-match "^/zhaw.*"
(mu4e-message-field msg :maildir))
"/zhaw/Archive")
;; everything else goes to /archive
(t "/archive"))))
;; Empty the initial bookmark list
(setq mu4e-bookmarks '())
;; All archived folders
(defvar d-archive "NOT (maildir:/dispatched/INBOX.Archive OR maildir:/zen-tempel/INBOX.Archive OR maildir:/200ok/INBOX.Archive OR maildir:/200ok-support/INBOX.Archive OR maildir:/zhaw/Archive)")
(defvar inbox-folders (string-join '("maildir:/dispatched/INBOX"
"maildir:/zen-tempel/INBOX"
"maildir:/200ok/INBOX"
"maildir:/200ok-support/INBOX")
" OR "))
(defvar draft-folders (string-join '("maildir:/dispatched/INBOX.Drafts"
"maildir:/zen-tempel/INBOX.Drafts"
"maildir:/200ok/INBOX.Drafts"
"maildir:/200ok-support/INBOX.Drafts")
" OR "))
(defvar spam-folders (string-join '("maildir:/dispatched/INBOX.spambucket"
"maildir:/zen-tempel/INBOX.spambucket"
"maildir:/200ok/INBOX.spambucket"
"maildir:/200ok-support/INBOX.spambucket")
" OR "))
(defvar blacklist-folders (string-join
'("maildir:/dispatched/INBOX.blacklist"
"maildir:/zen-tempel/INBOX.blacklist"
"maildir:/200ok/INBOX.blacklist"
"maildir:/200ok-support/INBOX.blacklist") " OR "))
;; Re-define all standard bookmarks to not include the spam and
;; blacklist folders for searches
(defvar d-spam (format "NOT (%s OR %s)" spam-folders blacklist-folders))
(add-to-list 'mu4e-bookmarks
'((concat d-spam " AND date:today..now") "Today's messages" ?t))
(add-to-list 'mu4e-bookmarks
'((concat d-spam " AND date:7d..now") "Last 7 days" ?w))
(add-to-list 'mu4e-bookmarks
'((concat d-spam " AND flag:flagged") "Flagged" ?f))
(add-to-list 'mu4e-bookmarks
'((concat d-spam " AND mime:image/*") "Messages with images" ?p))
(add-to-list 'mu4e-bookmarks
'(spam-folders "Spam" ?S))
(add-to-list 'mu4e-bookmarks
'(blacklist-folders "Blacklisted" ?B))
(add-to-list 'mu4e-bookmarks
'(draft-folders "Drafts" ?d))
(add-to-list 'mu4e-bookmarks
'(inbox-folders "Inbox" ?i))
(add-to-list 'mu4e-bookmarks
'((concat d-spam d-archive " AND (flag:unread OR flag:flagged) AND NOT flag:trashed")
"Unread messages" ?u))
;; Hack to get to a temporary inbox zero state when starting a new year
(add-to-list 'mu4e-bookmarks
'((concat d-spam d-archive (concat " (flag:unread OR flag:flagged) AND NOT flag:trashed AND date:" (format-time-string "%Y")))
"Unread messages, current year" ?U))
(add-to-list 'mu4e-bookmarks
'("(cron OR monit OR logcheck or UptimeRobot or noreply@linode.com) AND flag:unread" "Monitoring" ?M))(defun ok/message-attachment-present-p ()
"Return t if a non-gpg attachment is found in the current message."
(save-excursion
(save-restriction
(widen)
(goto-char (point-min))
(when (search-forward "<#part type" nil t) t))))
(setq ok/message-attachment-regexp
(regexp-opt '("[Ww]e send"
"[Ii] send"
"attach"
"[aA]ngehängt"
"[aA]nhang"
"[sS]chicke"
"angehaengt"
"haenge"
"hänge")))
(defun ok/message-warn-if-no-attachments ()
"Check if there is an attachment in the message if I claim it."
(when (and (save-excursion
(save-restriction
(widen)
(goto-char (point-min))
(re-search-forward ok/message-attachment-regexp nil t)))
(not (ok/message-attachment-present-p)))
(unless (y-or-n-p "No attachment. Send the message?")
(keyboard-quit))))
(add-hook 'message-send-hook #'ok/message-warn-if-no-attachments)For mail completion, only consider emails that have been seen in the last 6 months. This gets rid of legacy mail addresses of people.
(setq mu4e-compose-complete-only-after (format-time-string
"%Y-%m-%d"
(time-subtract (current-time) (days-to-time 150))))
(require 'mu4e-contrib)
(setq mu4e-html2text-command 'mu4e-shr2text)
;;(setq mu4e-html2text-command "iconv -c -t utf-8 | pandoc -f html -t plain")
(add-to-list 'mu4e-view-actions '("ViewInBrowser" . mu4e-action-view-in-browser) t)
Disable colors for HTML mails. HTML mails, especially transactional ones, can be very convoluted. Converting them to text and taking away colors can make them more readable.
(setq shr-use-colors t)Disable “HTML over plain text” heuristic. This variable officially has this rationale: “Ratio between the length of the html and the plain text part below which mu4e will consider the plain text part to be ‘This messages requires html’ text bodies. You can neutralize it (always show the text version) by using `most-positive-fixnum’.”
This heuristic overwrites the default setting (and configuration) that Plain text should be preferred over HTML!
In my experience, HTML Emails are WAY longer than only 5x the Plain text (Doodle, Airbnb, Meetup, etc), so this will yield me a lot of false positives whereas I have never seen a “This message requires HTML” body.
I wrote an accompanying blog post with further information: https://200ok.ch/posts/2018-10-25_disable_mu4e_html_over_plain_text_heuristic.html
(setq mu4e-view-html-plaintext-ratio-heuristic most-positive-fixnum)(add-hook 'mu4e-compose-mode-hook 'flyspell-mode)- Periodic - every 15 minutes
- Happening in the background
Note: There’s no notifications, because that’s only distracting.
(setq mu4e-update-interval (* 15 60))
(setq mu4e-index-update-in-background t)C-c RET s oto signC-c RET C-cto encryptC-c C-e vto verify the signatureC-c C-e dto decrypt
Always sign outgoing emails:
(setq mu4e-compose-crypto-reply-plain-policy 'sign)When sending encrypted messages, also encrypt to self so that I can read the mail in the sent folder:
(setq mml-secure-openpgp-encrypt-to-self t)
(setq mml-secure-openpgp-sign-with-sender t)With upgrading to Emacs 27, this broke
mu4e-compose-crypto-reply-plain-policy set to =’sign=. It always
wanted to sign with s/mime whereas I want to sign with gpg. I think
this option is obsolete. I’m leaving it here for a moment until I’m
sure it will not be needed anymore.
;; (add-hook 'mu4e-compose-mode-hook 'epa-mail-mode)
;; (add-hook 'mu4e-view-mode-hook 'epa-mail-mode)When looking at emails, show them nicely wrapped. That’s very helpful when people send mails with very long lines.
Disabling for the moment, because some emails looks worse after it.
visual-line-mode can always be invoked by w in mu4e-view-mode.
;; (add-hook 'mu4e-view-mode-hook 'visual-line-mode)(setq mu4e-compose-dont-reply-to-self t)(setq org-mu4e-link-query-in-headers-mode nil)This only adds :bcc.
(setq mu4e-view-fields '(:from :to :cc :bcc :subject :flags :date :maildir :mailing-list :tags :attachments :signature :decryption))(setq mu4e-confirm-quit nil)Rationale: E-mail takes too long to respond to, resulting in continuous inbox overflow for those who receive a lot of it.
(add-hook 'mu4e-compose-mode-hook
(defun ok-mu4e-keep-to-three-sentences ()
(shell-command "notify-send -u critical 'Keep to three sentences.'")
(message "Keep to three sentences.")))Set a sane ISO 8601 date format.
(setq mu4e-headers-date-format "%+4Y-%m-%d")Setting format=flowed for non-text-based mail clients which don’t
respect actual formatting, but let the text “flow” as they please.
Relevant RFC: https://tools.ietf.org/html/rfc3676
What is required is a format which is in all significant ways Text/Plain, and therefore is quite suitable for display as Text/Plain, and yet allows the sender to express to the receiver which lines are quoted and which lines are considered a logical paragraph, and thus eligible to be flowed (wrapped and joined) as appropriate.
- mu4e sets up visual-line-mode and also fill (
M-q) to do the right thing. - each paragraph is a single long line; at sending, emacs will add the special line continuation characters.
(setq mu4e-compose-format-flowed t)Some email clients ignore format=flowed (i.e. Outlook). Therefore,
we send very long lines, so that they auto-flow. 998 chars are the
actual maximum from the relevant RFC: https://www.ietf.org/rfc/rfc2822.txt
(setq fill-flowed-encode-column 998)(setq mu4e-msg2pdf "/usr/local/bin/msg2pdf")mu4e has a feature skipping duplicates designed for Borg.
While I’m not Borg, being thrown in with the lot brings trouble. I like scanning my Spam folder for false positives. When ‘duplicates’ are not shown, it’ll take me many runs to delete those tasty Bitcoin offers.
An even better solution to the problem would actually be to automatically delete duplicates - maybe with procmail.
(setq mu4e-headers-skip-duplicates nil)https://www.djcbsoftware.nl/code/mu/mu4e/iCalendar.html
Ability to accept or reject mail calendar invitations as well as the ability to add accepted invitations to Org mode (and therefore to the agenda).
(require 'mu4e-icalendar)
(mu4e-icalendar-setup)
(setq gnus-icalendar-org-capture-file "~/Dropbox/org/things.org")
(setq gnus-icalendar-org-capture-headline '("Calendar"))
(gnus-icalendar-org-setup)https://mathiasbynens.be/notes/gmail-plain-text https://mothereff.in/quoted-printable https://www.gnu.org/software/emacs/manual/html_node/emacs-mime/qp.html
Add a header action “Block” which add the Senders Name and From Address to a procmail blacklist.
(defun append-line-to-file (line path)
"Append a `line` to a file behind `path`"
(write-region (concat line "\n") nil path 'append))
(defun mu4e-strategy-from (strategy msg)
"If STRATEGY is 'blacklist', then add the `from` of a message to the
procmail. If it is 'whitelist', then whitelist'."
(let* ((from (mu4e-message-field msg :from))
(from_name (car (cdr (car from))))
(from_address (car (cdr (cdr (cdr (car from))))))
(path (format "~/.procmail/%s_from.txt" strategy)))
;; Whitelist/Blacklist the senders Name
(if from_name
(append-line-to-file from_name path))
;; Whitelist/Blacklist the Email-Address
(append-line-to-file from_address path)
(shell-command (format "sort -u -o %s %s" path path))
(message "%s: %s" strategy from)))
(defun mu4e-blacklist-subject (msg)
"Add the `subject` of a message to the procmail blacklist"
(let* ((subject (mu4e-message-field msg :subject))
(path "~/.procmail/blacklist_subject.txt"))
(if subject
(append-line-to-file subject path))
(shell-command (format "sort -u -o %s %s" path path))
(message "Blacklist: %s" subject)))
(add-to-list 'mu4e-headers-actions
'("f White 'From:'" . (lambda (msg) (mu4e-strategy-from "whitelist" msg))) t)
(add-to-list 'mu4e-headers-actions
'("F Block 'From:'" . (lambda (msg) (mu4e-strategy-from "blacklist" msg))) t)
(add-to-list 'mu4e-headers-actions
'("S Block 'Subject:'" . mu4e-blacklist-subject) t)
(defun munen-contact-processor (contact)
(cond
((string-match "phil@200ok.ch" contact) ; Phil sometimes dosn't add his name to the reply-to.
"Phil Hofmann <phil@200ok.ch>")
((string-match "d.kuehner@n-pg.de" contact) ; Sanitize NPG encoding
"Dominik Kühner <d.kuehner@n-pg.de>")
((string-match "wiffbubbles@icloud.com" contact) ; Monika writes her name in all caps and I don't want to forward it like that.
"Monika Bieri <wiffbubbles@icloud.com>")
((string-match "bieri.monika@icloud.com" contact) ; Monika writes her name in all caps and I don't want to forward it like that.
"Monika Bieri <bieri.monika@icloud.com>")
(t contact)))
(setq mu4e-contact-process-function 'munen-contact-processor)ido means “Interactively Do Things”. ido has a completion engine
that’s sensible to use everywhere. It is built-in and nice and could
change a lot of defaults like find-file and switching buffers.
It works well while not breaking Emacs defaults.
(ido-mode t)
(ido-everywhere t)
(setq ido-enable-flex-matching t)https://github.com/abo-abo/swiper
Ivy, a generic completion mechanism for Emacs.
Counsel, a collection of Ivy-enhanced versions of common Emacs commands.
Swiper, an Ivy-enhanced alternative to isearch.
Ivy is an interactive interface for completion in Emacs. Therefore
it overlaps in functionality with ido. While Ivy is more powerful,
it breaks certain standard functionality. So ido is enabled globally
by default and for certain tasks, Ivy overrides ido.
Emacs uses completion mechanism in a variety of contexts: code, menus,
commands, variables, functions, etc. Completion entails listing,
sorting, filtering, previewing, and applying actions on selected
items. When active, ivy-mode completes the selection process by
narrowing available choices while previewing in the minibuffer.
Selecting the final candidate is either through simple keyboard
character inputs or through powerful regular expressions.
(setq enable-recursive-minibuffers t)
(global-set-key (kbd "<f6>") 'ivy-resume)Show total amount of matches and the index of the current match
(setq ivy-count-format "(%d/%d) ")Wrap to the first result when on the last result and vice versa.
(setq ivy-wrap t)Enable Swiper
(global-set-key "\C-s" 'swiper)Configure Counsel
(global-set-key (kbd "C-x b") 'counsel-ibuffer)
(global-set-key (kbd "C-h d") 'counsel-describe-function)
(global-set-key (kbd "C-h v") 'counsel-describe-variable)
;; Run `counsel-ag` against the current directory and not against the
;; whole project
(global-set-key (kbd "C-c k") '(lambda()
(interactive)
(counsel-ag "" default-directory nil nil)))
(global-set-key (kbd "C-x l") 'counsel-locate)
(define-key minibuffer-local-map (kbd "C-r") 'counsel-minibuffer-history)Override C-c C-j (org-goto) with counsel-org-goto which brings
super fast fuzzy matching and navigation capabilities for headlines.
(define-key org-mode-map (kbd "C-c C-j") 'counsel-org-goto)Override C-x i (insert-file) in favor of counsel-imenu which
brings fuzzy matching to the ability to jump to any indexed position
to the already great [[https://www.gnu.org/software/emacs/manual/html_node/emacs/Imenu.html][imenu]].
(global-set-key (kbd "C-x i") 'counsel-imenu)Override find-file and dired in favor of the counsel counter
parts.
(global-set-key (kbd "C-x C-f") 'counsel-find-file)
(global-set-key (kbd "C-x d") 'counsel-dired)Next to counsel, there’s also smex which is M-x combined with
ido. smex has a better sorting algorithm than Counsel and having
both installed means that we get the Counsel interface with smex
sorting. Best of both worlds.
By default, counsel-M-x starts with a ^. More often than not, this
will be in the way of me fuzzy matching a function. Therefore I’ll
start it with an empty string as argument.
(global-set-key (kbd "M-x") (lambda ()
(interactive)
(counsel-M-x "")))Override insert-char.
(global-set-key (kbd "C-x 8 RET") 'counsel-unicode-char)Make the prompt line selectable (with C-p).
(setq ivy-use-selectable-prompt t)Some basic features are overwritten when “everything” becomes an Ivy
search buffer. For example:
- When two
diredbuffers are open and files should be copied from one to the other, one can use theupanddownkeys to toggle the destination. When this is a search buffer, it will auto complete for all local folders, instead. Since copying files is something I do often, this already means I have to disableIvyglobally. Trampauto-completion doesn’t work for me. I’m usingsudo:,ssh:and the likes a lot indiredmode. Auto completion when withinTrampis broken for me, so I always have to type out the whole connection string whenIvyis enabled fordired. Since this includes missing auto-completion on remote systems and such, it’s another valid reason to disableIvyglobally.
Ivy/Swiper cannot search in PDFs. It tries to search in the PDF source code. Therefore I fall back to using isearch within PDFs.
(add-hook 'pdf-view-mode-hook '(lambda()
(define-key pdf-view-mode-map "\C-s" 'isearch-forward)))Projectile completion (Default is ido)
(setq projectile-completion-system 'ivy)Mu4e “folder” and “from” completion (Default is ido)
(setq mu4e-completing-read-function 'ivy-completing-read)Synosaurus completion (Default is ido)
(setq synosaurus-choose-method 'ivy-read)I used to use isearch instead of Swiper.
Replace i-search-(forward|backward) with their respective regexp capable counterparts
;;(global-set-key (kbd "C-s") 'isearch-forward-regexp)
;;(global-set-key (kbd "C-r") 'isearch-backward-regexp)For chat-based communication, I like to use IRC. In my
~/.authinfo.gpg file, I have a line like:
machine irc.libera.chat login "munen" password SECRET_PASSWORD
This file is automatically read when connecting to servers. It’s the same for SMTP servers, for example.
For connecting to IRC, I’m using the built-in package erc.
Configure automatic join list
(setq erc-autojoin-channels-alist '(("libera.chat" "#organice" "#200ok" "#emacsconf" "#emacsconf-org" "#lobsters")
;; Deprecate Freenode (rationale https://github.com/200ok-ch/org-parser/pull/48)
;; ("freenode.net" "#200ok" "#emacsconf" "#emacsconf-org" "#lobsters")
;; This does not work, yet. The
;; channels cannot be joined on
;; connecting to bitlbee. bitlbee
;; needs to first connect to the
;; configured accounts (i.e.
;; slack). This could happen in a
;; timeout, or better event
;; oriented on a message that
;; bitlbee sends when connected to
;; the account.
;; '(("localhost" "#internal" "#general"))
))
By default, connect to Libera.Chat
(defconst erc-default-server "irc.libera.chat")Do not show join/quit info for lurkers
(setq erc-lurker-hide-list '("JOIN" "PART" "QUIT"))Automatically unfold images when links are shared
(require 'erc-image)
(add-to-list 'erc-modules 'image)
(erc-update-modules)Logging
(setq erc-log-channels-directory "~/.erc/logs/")
(add-hook 'erc-insert-post-hook 'erc-save-buffer-in-logs)Notify when someone is addressing me
(setq erc-pals '("phi|" "branch14"))
;; The quotes around %s are super important to prevent shell injection
(add-hook 'erc-text-matched-hook '(lambda(match-type nickuserhost msg)
(shell-command-to-string (format "notify-send erc '%s'" msg))))https://github.com/TheBB/spaceline
This part of the configuration was kindly provided by SirPscl.
(require 'spaceline)Slightly simplified flycheck segments for info, warning and error.
;; This is throwing errors when debugging elisp since [2022-12-06 Tue].
; (spaceline-define-segment ph/flycheck-warning-segment
; (if (flycheck-has-current-errors-p)
; (let ((c (cdr (assq 'warning (flycheck-count-errors
; flycheck-current-errors)))))
; (powerline-raw
; (if c (format "%s" c))))))
(spaceline-define-segment ph/flycheck-error-segment
(if (flycheck-has-current-errors-p)
(let ((c (cdr (assq 'error (flycheck-count-errors
flycheck-current-errors)))))
(powerline-raw
(if c (format "%s" c))))))
(spaceline-define-segment ph/flycheck-info-segment
(if (flycheck-has-current-errors-p)
(let ((c (cdr (assq 'info (flycheck-count-errors
flycheck-current-errors)))))
(powerline-raw
(if c (format "%s" c))))))Default faces for the flycheck segments.
(defface ph/spaceline-flycheck-error-face
'((t :inherit 'mode-line
:weight bold
:foreground "white"
:background "dark red"))
"Flycheck Error Face"
:group 'spaceline)
(defface ph/spaceline-flycheck-warning-face
'((t :inherit 'mode-line
:weight bold
:foreground "white"
:background "DarkOrange3"))
"Flycheck Warning Face"
:group 'spaceline)
(defface ph/spaceline-flycheck-info-face
'((t :inherit 'mode-line
:weight bold
:foreground "white"
:background "dark green"))
"Flycheck Info Face"
:group 'spaceline)Setting the face according to evil-state.
(defun ph/spaceline-highlight-face-evil-state ()
"Set the highlight face depending on the evil state."
(if (bound-and-true-p evil-local-mode)
(let* ((face (assq evil-state spaceline-evil-state-faces)))
(if face (cdr face) (spaceline-highlight-face-default)))
(spaceline-highlight-face-default)))
(setq-default spaceline-highlight-face-func
'ph/spaceline-highlight-face-evil-state)Set the evil-state segment colors for operator-state.
(defface ph/spaceline-evil-operator-face
'((t (:background "cornflower blue"
:inherit 'spaceline-evil-normal)))
"Spaceline Evil Operator State"
:group 'spaceline)
(add-to-list 'spaceline-evil-state-faces
'(operator . ph/spaceline-evil-operator-face))(defun ph/git-branch-name ()
(replace-regexp-in-string "^ Git[:-]" "" vc-mode))
(spaceline-define-segment ph/version-control
"Version control information."
(when vc-mode
(s-trim (concat (ph/git-branch-name)))))Tramp offers the following file name syntax to refer to files on other machines.
/method:host:filename
/method:user@host:filename
/method:user@host#port:filename
The following segemnts display the current buffer’s method and user@host.
(spaceline-define-segment ph/remote-method
(when (and default-directory
(file-remote-p default-directory 'method))
(file-remote-p default-directory 'method)))
(spaceline-define-segment ph/remote-user-and-host
(when (and default-directory
(or
(file-remote-p default-directory 'user)
(file-remote-p default-directory 'host)))
(concat
(file-remote-p default-directory 'user) "@"
(file-remote-p default-directory 'host))))Default faces for the tramp segments.
(defface ph/spaceline-tramp-user-host-face
'((t :inherit 'mode-line
:foreground "black"
:background "#fce94f"))
"Tramp User@Host Face"
:group 'spaceline)
(defface ph/spaceline-tramp-method-face
'((t :inherit 'mode-line
:foreground "black"
:background "#ff5d17"))
"Tramp Method Face"
:group 'spaceline)I’m not using Mu4e contexts, yet, because my configuration started before they were introduced. I’m leaving the segment configuration for the future.
;; (spaceline-define-segment ph/mu4e-context-segment
;; (let ((context (mu4e-context-current)))
;; (when (and context
;; (string-prefix-p "mu4e" (symbol-name major-mode)))
;; (mu4e-context-name context))))Face for mu4e segemnt.
;; (defface ph/spaceline-mu4e-context-face
;; '((t :inherit 'mode-line
;; :weight bold))
;; "mu4e face"
;; :group 'spaceline)I like to set timers, for example through org-pomodoro.el
(spaceline-define-segment org-timer-left-time
"Show the time left in the current org-timer (i.e. a pomodoro)."
(ok-pomodoro-remaining-time))Setting up the mode-line and order of segements. Compile the modeline with M-x
spaceline-compile.
(require 'spaceline-config)
(spaceline-spacemacs-theme)
;; Otherwise spaceline will be huge in Emacs >= 27.1
;; (setq powerline-height 1)
;; Since Emacs >= 28.2, it needs to be bigger to stay the same size.
(setq powerline-height 22)
;; Since Emacs >= 27.1, there's no need for font trickery. Just use
;; UTF-8.
;; (setq powerline-default-separator 'utf-8)
(spaceline-install
'main
'((evil-state :face highlight-face)
(buffer-id)
;; (org-timer-left-time) ;; Currently, I show the remaining time in Polybar, not Emacs.
;; (ph/mu4e-context-segment :face 'ph/spaceline-mu4e-context-face)
(ph/remote-method :face 'ph/spaceline-tramp-method-face)
(ph/remote-user-and-host :face 'ph/spaceline-tramp-user-host-face)
(buffer-modified))
'(;;(minor-modes :when active)
(projectile-root)
(ph/version-control)
;(line-column :when active)
;(buffer-position :when active)
(ph/flycheck-info-segment :face 'ph/spaceline-flycheck-info-face :when active)
(ph/flycheck-warning-segment :face 'ph/spaceline-flycheck-warning-face :when active)
(ph/flycheck-error-segment :face 'ph/spaceline-flycheck-error-face :when active)
(line-column)
(major-mode)))Set mode-line always active (don’t hide segments when focus is on a different window).
(defun powerline-selected-window-active () t)Diminish implements hiding or abbreviation of the mode line displays (lighters) of minor-modes.
(eval-after-load "auto-revert"
'(diminish 'auto-revert-mode))
(eval-after-load "beacon"
'(diminish 'beacon-mode))
(eval-after-load "ivy"
'(diminish 'ivy-mode))
(eval-after-load "projectile"
'(diminish 'projectile-mode))
(eval-after-load "projectile-rails"
'(diminish 'projectile-rails-mode))
(eval-after-load "rainbow-mode"
'(diminish 'rainbow-mode))
(eval-after-load "undo-tree"
'(diminish 'undo-tree-mode))
(eval-after-load "which-key"
'(diminish 'which-key-mode))"emacs-spaceline"
https://github.com/hlissner/emacs-hide-mode-line
A minor mode that hides (or masks) the mode-line in your current buffer. It can be used to toggle an alternative mode-line, toggle its visibility, or simply disable the mode-line in buffers where it isn’t very useful otherwise.
(require 'hide-mode-line)
(add-hook 'pdf-view-mode-hook #'hide-mode-line-mode)https://github.com/bnbeckwith/writegood-mode
This is a minor mode to aid in finding common writing problems.
It highlights text based on a set of weasel-words, passive-voice and duplicate words.
https://github.com/hpdeifel/synosaurus/
Synosaurus is a thesaurus front-end with pluggable back-end.
Use the openthesaurus.de back-end.
(setq synosaurus-backend 'synosaurus-backend-openthesaurus)
(defalias 'thesaurus-openthesaurus-de 'synosaurus-lookup)Emacs has built-in functionality for checking and correcting spelling
called ispell.el. On top of that, there’s a built-in minor mode for
for on-the-fly spell checking. called flyspell-mode.
Flyspell can use multiple back-ends (for example ispell, aspell or hunspell).
Do not order not by the default of alphabetical ordering.
(setq flyspell-sort-corrections nil)When checking the entire buffer, don’t print messages for every word. This is a major performance gain.
(setq flyspell-issue-message-flag nil)Here in Switzerland, there are four official languages: Swiss German, French, Italian and Romansh. Also, we converse a lot in German and English. Hence, it’s a regular occurrence to have one file with multiple languages in them. Especially for these situations it’s still to have proper spell checking. Fortunately, Emacs has us covered!
Hunspell is a free spell checker and used by LibreOffice, Firefox and
Chromium. It allows to set multiple dictionaries - even different
dictionaries per language (aspell, for example also allows multiple
dictionaries, but only for the same language). It also can be used as
an ispell.el backend.
To use hunspell, install it first:
apt install hunspell hunspell-de-de hunspell-en-gb hunspell-en-us hunspell-de-ch-frami
(with-eval-after-load "ispell"
;; Configure `LANG`, otherwise ispell.el cannot find a 'default
;; dictionary' even though multiple dictionaries will be configured
;; in next line.
(setenv "LANG" "en_US.UTF-8")
(setq ispell-program-name "hunspell")
;; Configure German, Swiss German, and two variants of English.
(setq ispell-dictionary "de_DE,de_CH,en_GB,en_US")
;; ispell-set-spellchecker-params has to be called
;; before ispell-hunspell-add-multi-dic will work
(ispell-set-spellchecker-params)
(ispell-hunspell-add-multi-dic "de_DE,de_CH,en_GB,en_US"))
;; For saving words to the personal dictionary, don't infer it from
;; the locale, otherwise it would save to ~/.hunspell_de_DE.
(setq ispell-personal-dictionary "~/.hunspell_personal")
;; The personal dictionary file has to exist, otherwise hunspell will
;; silently not use it.
(unless (file-exists-p ispell-personal-dictionary)
(write-region "" nil ispell-personal-dictionary))Advice to re-check the buffer after a word has been added to the dictionary. This has the benefit of the word actually being cleared, but the downside that the whole buffer has to be re-checked which an take some time.
;; (defun flyspell-buffer-after-pdict-save (&rest _)
;; (flyspell-buffer))
;; (advice-add 'ispell-pdict-save :after #'flyspell-buffer-after-pdict-save)The proper solution (for which I don’t have time now) is to just mark all further occurrences of the word you just saved as correct (without having to recheck the whole buffer).
Alternatively to using hunspell, here’s an option to switch the
dictionary between German and English.
The German dictionary is from here.
;; (defun flyspell-switch-dictionary()
;; "Switch between German and English dictionaries"
;; (interactive)
;; (let* ((dic ispell-current-dictionary)
;; (change (if (string= dic "deutsch") "english" "deutsch")))
;; (ispell-change-dictionary change)
;; (message "Dictionary switched from %s to %s" dic change)))My preferred font is “Fira Code Retina”. In Debian, the package is
called fonts-firacode, in Guix it’s font-fira-code.
(when (eq system-type 'gnu/linux)
(add-to-list 'default-frame-alist
'(font . "Fira Code Retina 9"))
;; In the past, this was the name for the same font:
;; (add-to-list 'default-frame-alist
;; '(font . "Fira CodeSource Code Pro Retina 9"))
;; (set-face-attribute 'default t :font "Fira Code Retina 9")
;; This is a great fallback font. It looks very similar and
;; comes preinstalled on many systems.
;; (add-to-list 'default-frame-alist
;; '(font . "DejaVu Sans Mono 9"))
;; Manually setting the font
;; (set-frame-font "Fira Code Retina 9")
;; Default Browser
(setq browse-url-browser-function 'browse-url-generic
browse-url-generic-program "firefox"
browse-url-new-window-flag t)
(menu-bar-mode -1)
;; enable pdf-tools
(pdf-tools-install))"font-fira-code"
"fontconfig"
Requires the fonts-symbola Debian package
;; (set-fontset-font t nil "Symbola" nil 'prepend)(set-fontset-font t nil "Noto Color Emoji" nil 'prepend)
;; (set-fontset-font t '(#x1f000 . #x1faff)
;; (font-spec :family "Noto Color Emoji"))"font-google-noto"
(when (eq system-type 'darwin)
(set-frame-font "Menlo 14")
; Use Spotlight to search with M-x locate
(setq locate-command "mdfind"))(setq custom-safe-themes
(quote
("df3e05e16180d77732ceab47a43f2fcdb099714c1c47e91e8089d2fcf5882ea3"
"d09467d742f713443c7699a546c0300db1a75fed347e09e3f178ab2f3aa2c617"
"8db4b03b9ae654d4a57804286eb3e332725c84d7cdab38463cb6b97d5762ad26"
"85c59044bd46f4a0deedc8315ffe23aa46d2a967a81750360fb8600b53519b8a"
default)))(defun dark-mode ()
"Default theme and font size. Pendant: (presentation-mode)."
(interactive)
(mapcar 'disable-theme custom-enabled-themes)
(set-face-attribute 'default nil :height 150)
;; Themes
;; (set-frame-parameter nil 'background-mode 'dark)
;; Dark, High Contrast <- favorite
(load-theme 'wombat)
(setq frame-background-mode (quote dark))
;; Dark, Low contrast
;; (load-theme 'darktooth)
;; Dark, Lowest contrast
;; (load-theme 'zenburn)
)
(defun light-mode ()
"Enables a light theme."
(interactive)
;; (set-face-attribute 'default nil :height 100)
(mapcar 'disable-theme custom-enabled-themes)
(load-theme 'spacemacs-light t))(defun presentation-mode ()
"Presentation friendly theme and font size."
(interactive)
(load-theme 'leuven t)
(mapcar 'disable-theme custom-enabled-themes)
(set-face-attribute 'default nil :height 150))"emacs-spacemacs-theme"
(add-hook 'server-after-make-frame-hook 'light-mode)
(light-mode)Note: If I wanted to make a distinction between GUI and terminal modes, this would be reasonable boilerplate:
(add-hook 'after-make-frame-functions
(lambda ()
;; we want some font only in GUI Emacs
(when (display-graphics-p)
(set-frame-font "DejaVu Sans Mono 28")))
Create a customized time table ready for CSV export.
Usage:
#+name: ok-timetable
#+BEGIN_SRC elisp
(ok-export-org-timetable "2018-05-09")
#+END_SRC
When evaluating the src-block above, it’ll yield a table like:
#+RESULTS: ok-timetable
| date | hours | task |
|------------+--------+----------------------------------|
| 2018-05-09 | 0:02 | #support |
| 2018-05-09 | 0:17 | #support |
|------------+--------+----------------------------------|
(require 'seq)
(defun ok-filter-table-by-date (tbl from-date table-row)
"Filter a TBL by FROM-DATE which is found in TABLE-ROW."
;; Sort by date
(seq-sort '(lambda (e1 e2)
(string-lessp (nth table-row e1)
(nth table-row e2)))
;; Filter to start with FROM-DATE
(seq-filter (lambda (elem)
(let ((date-elem (nth table-row elem)))
;; >=
(when (or (string-greaterp date-elem from-date)
(string-equal date-elem from-date))
elem)))
tbl)))
(defun ok-hm-to-hours (worktime)
"Casts HH:MM WORKTIME into a floating point number."
(condition-case worktime
(let* ((time (split-string worktime ":"))
(minutes (/ (string-to-number (second time))
60.0))
(hours (string-to-number (first time))))
(format "%.3f" (+ hours minutes)))
(error 0)))
(defun ok-split-hash-and-description (text)
"Given a TEXT like '#tag1 #tag2 some description' and return tags and description as a list."
;; The concat is a little hack, so that there's always a minimum
;; description to be found
(let ((text (concat text " ")))
;; A hashtag can have numbers, dashes and a-z
(if (string-match "\\(#[a-z-0-9]+ \\)+" text)
(let* ((hashtags (match-string 0 text))
;; Couldn't figure out how to get the description
;; through an elisp regexp, so I'm just reading the
;; remainder of the text after all hashtags here
(description (substring text (length hashtags) (length text))))
(list
(string-trim hashtags)
(string-trim description))))))
(defun ok-find-parent-of-type (elem-type elem)
"For a child ELEM, find the closes parent element of type ELEM-TYPE."
(let ((parent-elem (org-element-property :parent elem)))
(if (eq elem-type (car parent-elem))
parent-elem
(ok-find-parent-of-type elem-type parent-elem))))
(defun ok-generate-clock-table ()
"Generate a list of org elements of type 'clock."
(let* ((ast (org-element-parse-buffer 'element)))
;; Map a function to all elements of TYPE 'clock which extracts
;; the TITLE, DURATION and DATE of a TODO.
(org-element-map ast 'clock
(lambda (clock-elem)
(let* ((val (org-element-property :value clock-elem))
(task (ok-find-parent-of-type 'headline clock-elem))
(hash-and-description (ok-split-hash-and-description
(org-element-property :title task))))
`(,(let ((year (org-element-property :year-start val))
(month (org-element-property :month-start val))
(day (org-element-property :day-start val)))
(format "%4d-%02d-%02d" year month day ))
,(ok-hm-to-hours (org-element-property :duration clock-elem))
,(first hash-and-description)
,(second hash-and-description)))))))
(defun ok-export-org-timetable (from-date)
"Generate a list from 'org-mode' clock elements starting from FROM-DATE."
;; Concatenate header, element data and footer into one list which
;; will automatically be rendered by org-mode as a table.
(append
'(("date" "duration" "hashtags" "description"))
'(hline)
;; Generate tree of all visible elements within buffer (narrowing
;; works).
(ok-filter-table-by-date (ok-generate-clock-table) from-date 0)))
(defun ok-export-table-to (table-name target-path)
"Exports the contents of a table called TABLE-NAME to a CSV file at TARGET-PATH."
(progn
(save-excursion
(goto-char (point-min))
(search-forward (concat "RESULTS: " table-name))
(org-cycle)
(evil-next-line)
(org-table-export target-path "orgtbl-to-csv")
(evil-previous-line))
(org-cycle))
(message "Table export completed"))
(setq ok-export-org-estimations-file "~/src/200ok/admin/src/org-ok-estimations/org-ok-estimations.el")
(unless (file-exists-p ok-export-org-estimations-file)
(load-file ok-export-org-estimations-file))Don’t export the html-validation-link
(setq org-html-validation-link nil)(setq org-export-with-planning t)This exports the Org mode Agenda to a ICS file, so that it can be consumed by any calendar application.
;; Setting dummy vars for private variables.
(setq org-agenda-private-local-path "/tmp/dummy.ics")
(setq org-agenda-private-remote-path "/sshx:user@host:path/dummy.ics")
;; Export the agenda for the next month (default is week)
(setq org-agenda-span (quote month))
;; Override the dummy values from above.
(if (file-exists-p "~/.emacs.d/private_config.el")
(load-file "~/.emacs.d/private_config.el"))
(setq org-agenda-custom-commands
`(;; Agenda to only show personal GTD files and filter work
;; related files which is easy to add with `#+FILETAGS: 200ok`.
("c" "Custom agenda, ignore 200ok tag"
((agenda ""))
((org-agenda-tag-filter-preset '("-200ok"))))
;; Define a custom command to save the org agenda to a file
("X" agenda "" nil ,(list org-agenda-private-local-path))))
(defun org-agenda-export-to-ics ()
(set-org-agenda-files)
;; Run all custom agenda commands that have a file argument.
(org-batch-store-agenda-views)
;; Org mode correctly exports TODO keywords as VTODO events in ICS.
;; However, some proprietary calendars do not really work with
;; standards (looking at you Google), so VTODO is ignored and only
;; VEVENT is read.
(with-current-buffer (find-file-noselect org-agenda-private-local-path)
(goto-char (point-min))
(while (re-search-forward "VTODO" nil t)
(replace-match "VEVENT"))
(save-buffer))
;; Copy the ICS file to a remote server (Tramp paths work).
(copy-file org-agenda-private-local-path org-agenda-private-remote-path t))Since I’m editing my Org files not just with Emacs, but also with organice, I’m doing this on a regular basis in a cron job which runs this code:
#!/bin/bash
emacs -batch -l ~/.emacs.d/init.el -eval "(org-agenda-export-to-ics)" -kill
if [[ "$?" != 0 ]]; then
notify-send -u critical "exporting org agenda failed"
fiThe hourly cron job looks like this:
0 * * * * /home/munen/bin/export-org-agenda.sh
Google calendar supports subscribing to ICS feeds out of the box. However, it only updates the feed “every few hours” which seems to be 12-24h. With this Google AppsScript, this can be configured in a fine grained way: https://github.com/derekantrican/GAS-ICS-Sync
https://github.com/tarsius/hl-todo
In the past, I’ve used comment-tags-mode. It’s last commit is 2017, while hl-todo is still actively developed in 2022 by tarsius.
hl-todo highlights and lists comment tags such as ‘TODO’, ‘FIXME’, ‘XXX’.
(require 'hl-todo)
(setq hl-todo-keyword-faces
'(("TODO" . "#DF5427") ; A concrete TODO with actionable steps
("FIXME" . "#DF5427") ; A non-concrete TODO. We only know something is broken/amiss.
("HACK" . "#DF5427") ; Works, but is a code smell (quick fix). Might break down the line.
("CHECK" . "#CC6437") ; Assumption that needs to be verified.
("NOTE" . "#1FDA9A") ; Use to highlight a regular, but especially important, comment.
("INFO" . "#1FDA9A") ; Use to highlight a regular, but especially important, comment.
))
Define helpful shortcuts:
(define-key hl-todo-mode-map (kbd "C-c t p") 'hl-todo-previous)
(define-key hl-todo-mode-map (kbd "C-c t n") 'hl-todo-next)
(define-key hl-todo-mode-map (kbd "C-c t o") 'hl-todo-occur)
(define-key hl-todo-mode-map (kbd "C-c t i") 'hl-todo-insert)Enable hl-todo mode where required:
(add-hook 'prog-mode-hook 'hl-todo-mode)
(add-hook 'conf-mode-hook 'hl-todo-mode)"emacs-hl-todo"
The following packages would be nice, in theory. In practice something is yet amiss, but it might be different in the future. That’s why I’m keeping them around and will try them at another time.
https://github.com/bburns/clipmon
Proposition: Monitors system clipboard and puts everything in the kill-ring.
Caveat: In theory, I liked the package. However, it seemed to cause racing conditions and crashed Emacs multiple times a day. When this is re-implemented in a non-blocking mode, this would be nice.
;; (add-to-list 'after-init-hook 'clipmon-mode-start)Theoretically this is really nice to have functionality. However, I couldn’t run it for long. Emacs started freezing a lot on the day when I added this lib. I assume, because clipmon is blocking - and I always run multiple instances of Emacs in parallel. They might be in for a classic racing condition. Might be just another bug.
- A business partners configuration: https://github.com/SirPscl/emacs.d
Modes I probably could use, but haven’t tried out, yet.
Kudos SirPscl