While it is not entirely clear why this condition is being
triggered, it does resolve a reported bug.

Fixes: #26315

PR-URL: #29912
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>

This commit removes unused using declarations in
src/node_worker.cc.

PR-URL: #29883
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>

PR-URL: #29845
Refs: #29842
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>

Closing a FileHandle almost never fails, so it was hard to
notice before that `stream.emit(err)` would not emit an error
event due to the missing event name.

Destroying the stream with the error seems like the right thing
to do in that scenario.

PR-URL: #29884
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Minwoo Jung <minwoo@nodesource.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>

PR-URL: #29823
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>

Read up to 32 directory entries in one batch when `dir.readSync()`
or `dir.read()` are called.

This increases performance significantly, although it introduces
quite a bit of edge case complexity.

                                                                 confidence improvement accuracy (*)    (**)    (***)
     fs/bench-opendir.js mode='async' dir='lib' n=100                  ***    155.93 %      ±30.05% ±40.34%  ±53.21%
     fs/bench-opendir.js mode='async' dir='test/parallel' n=100        ***    479.65 %      ±56.81% ±76.47% ±101.32%
     fs/bench-opendir.js mode='sync' dir='lib' n=100                           10.38 %      ±14.39% ±19.16%  ±24.96%
     fs/bench-opendir.js mode='sync' dir='test/parallel' n=100         ***     63.13 %      ±12.84% ±17.18%  ±22.58%

PR-URL: #29893
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>

PR-URL: #29893
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>

PR-URL: #29909
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>

During the addition of macOS support for large pages, a `memcpy` ended
up under the wrong preprocessor directive. As a result, the newly
allocated large pages were not initialized with a copy of the text
section.

Thanks to Suresh Srinivas <suresh.srinivas@intel.com>!

PR-URL: #29914
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>

Fixes: #29904

PR-URL: #29913
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>

* Fix sorting of sections.
* Fix sorting of bottom references.
* Wrap lines at 80 chars.
* Fix a heading level.

PR-URL: #29906
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>

The two-week wait period for merging npm releases is one of those rule
exceptions that would be great to get rid of (in my opinion at least).
There are too many exceptions to our rules and they tend to be scattered
across multiple documents. People don't feel confident they know the
rules, thus hampering both project velocity and Collaborator confidence.
It also means I (and perhaps others?) get lots of pings about whether
this or that can land, etc.

This particular issue has come up a few times lately, and is
specifically calling for an exception-to-the-exception so that the
latest version of npm can be released along with Node.js 13.0.0.
Refs: #29885 (comment)

I propose here reducing the wait period from two weeks to one week. If,
after some amount of time, there seems to be no problems caused by this
change, we can consider further reducing the wait period to 48 hours to
align it with all other change requests. Even if you think that is going
too far, hopefully we can at least get it reduced to a week, as the
second week of the waiting period is usually just the PR sitting around
with an occasional ping from someone about whether/when it can land.

PR-URL: #29922
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>

This removes `require('util')` from the `domain` module. There was
only a single simple type check used from the `util` module which
is now inlined instead.

PR-URL: #29825
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>

Since worker threads are complete Node.js environments, including the
ability to load native addons, and since those native addons can
allocate resources to be freed when objects go out of scope, and since,
upon worker thread exit, the engine does not invoke the weak callbacks
responsible for freeing resources which still have references, this
modification introduces tracking for weak references such that a list
of outstanding weak references is maintained. This list is traversed
during environment teardown. The callbacks for the remaining weak
references are called.

This change is also relevant for Node.js embedder scenarios, because in
those cases the process also outlives the `node::Environment` and
therefore weak callbacks should also be rendered as environment cleanup
hooks to ensure proper cleanup after native addons. This changes
introduces the means by which this can be accomplished.

A benchmark is included which measures the time it takes to execute the
weak reference callback for a given number of weak references.

Re: tc39/proposal-weakrefs#125 (comment)
PR-URL: #28428
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>

Refs: nodejs/node-gyp#1820
Refs: nodejs/node-gyp#1843

PR-URL: #29897
Reviewed-By: Christian Clauss <cclauss@me.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>

If GYP finds a string variable that can be converted to an integer,
it will do it when the variable is expanded. Use "0.0" instead of "0"
to force strings and be able to use comparison operations such as
`gas_version >= "2.26"` in Python 3.

PR-URL: #29897
Reviewed-By: Christian Clauss <cclauss@me.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>

PR-URL: #29897
Reviewed-By: Christian Clauss <cclauss@me.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>

PR-URL: #29956
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>

Make `distutils.version.StrictVersion` available as a helper to
gyp expressions so they can do proper version checks and update
the gyp files accordingly.

Caveat emptor: `StrictVersion` does *not* like empty strings so
this commit adds truthiness guards. The helper could deal with
those but I felt it better to make it explicit.

Fixes: #29927

PR-URL: #29931
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>

Without the line lengths of in-memory transpiled source, it's not
possible to convert from byte ofsets to line/column offsets.

PR-URL: #29863
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>

Add missing option "mode". Alphabetize options for easier maintenance.

PR-URL: #29967
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>

Prepare the final few documents that haven't been updated to always use
`[]` with reference links and to escape `[` and `]` for things that
aren't links in markdown files.

PR-URL: #29963
Reviewed-By: Masashi Hirano <shisama07@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>

Doctool tests have been failing a lot in CI on Win2008 R2. It appears
async functions and callback-based functions are being used in
combination such that the callback-based function cannot guarantee that
it will invoke its callback. Convert the callback-based functions to
async functions so we have one paradigm and reliable results.

PR-URL: #29979
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>

PR-URL: #29962
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>

PR-URL: #29961
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>

PR-URL: #29961
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>

Provides some missing test coverage.

PR-URL: #29970
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>

Multiple sections may be marked as "r-xp" and with the executable's
path. We use the location of the `__nodetext` symbol added by the linker
script to ensure that the range we retrieve from the maps file does
indeed contain the Node.js text section.

Thanks to Suresh Srinivas <suresh.srinivas@intel.com>!

PR-URL: #29973
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>

PR-URL: #29950
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>

Currently `--es-module-specifier-resolution=node` has an alternative
resolution order than the default in common.js, this causes
inconsistencies. As discussed in @nodejs/modules we want to preserve
resolution order between implementations.

PR-URL: #29974
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Guy Bedford <guybedford@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>

Build the addons for benchmarks in the same way that the addons for
tests are built.

PR-URL: #29995
Fixes: nodejs/build#1961
Refs: 53ca0b9#commitcomment-35494896
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Beth Griggs <Bethany.Griggs@uk.ibm.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>

Fixes: #29927
Refs: #29931

PR-URL: #29965
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>

PR-URL: #29984
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>

common.skipIfInspectorEnabled() is only used once in all of the tests.
The test is more clear (in my opinion, at least) without the abstraction
so put the check directly in the test. Additionally, it honestly looks
like an error (which is how I noticed it in the first place) and that
someone mistyped the far more common skipIfInspectorDisabled().

PR-URL: #29993
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>

For compatibility with OpenSSL 1.1.0 and 1.0.1 a series of
initialization wrappers were being called, many deprecated, and many
calling each other internally already. Compatibility is unnecessary in
12.x and later, which support only OpenSSL 1.1.1, and the multiple calls
cause the configuration file to be loaded multiple times.

Fixes: #29702

See:
- https://mta.openssl.org/pipermail/openssl-users/2019-October/011303.html
- https://www.openssl.org/docs/man1.1.1/man3/OPENSSL_init_ssl.html
- https://www.openssl.org/docs/man1.1.1/man3/OPENSSL_init_crypto.html

PR-URL: #29999
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Shelley Vohr <codebytere@gmail.com>

update collaborator email address

PR-URL: #30007
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>

Explicitly open files with utf8 encoding, otherwise the system could use
another encoding such as latin1 by default.

PR-URL: #30023
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Christian Clauss <cclauss@me.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>

Notable changes:

- uv_random() has been added.
- More work to read those pesky Windows
  environment variables.
- Several build fixes for Tier 3 platforms (Android,
  NetBSD, OpenBSD, Haiku).
- Stop using fsevents to watch files (using kqueue again).

PR-URL: #29996
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>

This commit removes the include of the IO manipulators header as I can't
find that it is used anywhere.

PR-URL: #30004
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>

PR-URL: #30029
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Minwoo Jung <nodecorelab@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>

This test would be broken by V8 7.9 due to the changed `ArrayBuffer`
backing store management (the same way that V8 7.8 broke this for
`SharedArrayBuffer`s). While working on a solution, it would be
good to already have this test in Node.js to avoid unnecessary
accidental breakage.

Refs: nodejs/node-v8#115

PR-URL: #30044
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>

`String.prototype.split()` returns an array of strings so the branch is
never taken.

Fixes: #30040

PR-URL: #30041
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>

The fallback code is no longer used when exporting to readable-stream.

Refs: #29514

PR-URL: #30041
Fixes: #30040
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Matteo Collina <matteo.collina@gmail.com>

Also eliminate some redundancy.

PR-URL: #30038
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>

`configure` will log a warning if the detected compiler is not new
enough. Take some of the guesswork out of it by also logging the
version of the compiler that was detected.

PR-URL: #30028
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>

Make ListNode<T> postmortem easier to find last items in the queue.

PR-URL: #30027
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>

Fold `CancelPendingDelayedTasks()` into `UnregisterIsolate()` and
make implementing it optional.

It makes sense for these two operations to happen at the same time,
so it is sufficient to provide a single operation instead of two
separate ones.

PR-URL: #30034
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Shelley Vohr <codebytere@gmail.com>

Linter failures in the `test-doc` make target were not failing the
build if the subsequent `doctools` test passed as its exit code
wasn't being preserved.

Make the `lint` target a dependency of `test-doc` so that it is
outside of the `node_use_openssl` guard -- its own dependencies
have their own guards where necessary and the targets that don't
require an available node (e.g. the C++ linters) will be allowed
to run.

PR-URL: #30012
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>

This commit removes a few std::endl that could be replaced by '\n' as it
does not look like the buffer needs to be flushed in these places.

This is only done in error handling, and once when the report has been
generated, so this is very minor but I thought I'd bring it up in case
it was overlooked.

PR-URL: #30003
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>

document the fact that --enable-source-maps and prepareStackTrace are
incompatible, see #29994

PR-URL: #30046
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>

This should keep the npm warning at bay until it is patched
upstream.

Refs: npm/cli#269
Refs: #30066

PR-URL: #30079
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>

Turn tasks scheduled on the `v8::Isolate` or on the given platform
into no-ops if the underlying `MainThreadInterface` has gone away
before the task could be run (which would happen when the
`Environment` instance and with it the `inspector::Agent` instance
are destroyed).

This addresses an issue that Electron has been having with
inspector support, and generally just seems like the right thing
to do, as we may not fully be in control of the relative timing
of Environment teardown, platform tasksexecution, and the
execution of `RequestInterrupt()` callbacks (although
the former two always happen in the same order in our own code).

PR-URL: #30031
Reviewed-By: Eugene Ostroukhov <eostroukhov@google.com>
Reviewed-By: Shelley Vohr <codebytere@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>

PR-URL: #30047
Reviewed-By: Christian Clauss <cclauss@me.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: David Carlier <devnexen@gmail.com>

PR-URL: #30050
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>

Original commit message:

    [regexp] Fix the order of named captures on the groups object

    Named capture properties on the groups object should be ordered by the
    capture index (and not alpha-sorted). This was accidentally broken in
    https://crrev.com/c/1687413.

    Bug: v8:9822,v8:9423
    Change-Id: Iac6f866f077a1b7ce557ba47e8ba5d7e7014b3ce
    Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1864829
    Auto-Submit: Jakob Gruber <jgruber@chromium.org>
    Reviewed-by: Peter Marshall <petermarshall@chromium.org>
    Commit-Queue: Peter Marshall <petermarshall@chromium.org>
    Cr-Commit-Position: refs/heads/master@{#64306}

Refs: v8/v8@ed40ab1
Fixes: #29878

PR-URL: #30064
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>

Original commit message:

    Add missing null condition in Proxy GetPrototypeof

    Bug: v8:9781
    Change-Id: I1f82a828f103cc2aa3f9553214f6b4867ffc3b17
    Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1829897
    Commit-Queue: Z Nguyen-Huu <duongn@microsoft.com>
    Reviewed-by: Georg Neis <neis@chromium.org>
    Cr-Commit-Position: refs/heads/master@{#64049}

Refs: v8/v8@c721203
Fixes: #29730

PR-URL: #30065
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Beth Griggs <Bethany.Griggs@uk.ibm.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>

This adds a test that makes sure than running `npm` from a release does
not print warnings to the console.

PR-URL: #30082
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Beth Griggs <Bethany.Griggs@uk.ibm.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>

PR-URL: #30115
Fixes: #30000
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Gabriel Schulhof <gabriel.schulhof@intel.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Yuta Hiroto <hello@hiroppy.me>

Embedders sometimes want to take control of V8 platform initialization
themselves, so we wouldn't want to experience an error if
NODE_USE_V8_PLATFORM was false necessarily. Instead, we can also gate
it with HAVE_INSPECTOR to allow embedders to define that themselves
and use Inspector without NODE_USE_V8_PLATFORM.

PR-URL: #30049
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Minwoo Jung <nodecorelab@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>

Use arrow functions for callbacks in
test/addons/make-callback-recurse/test.js.

PR-URL: #30069
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>

Adds information about tools available for building N-API addons.

Fixes: nodejs/abi-stable-node#384
PR-URL: #30032
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gabriel Schulhof <gabriel.schulhof@intel.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>

We clear the async id stack inside the uncaught exception handler and
emit `after` events in the process, so we should not emit `after`
a second time from the `runInAsyncScope()` code.

This should match the behaviour we have in C++.

Fixes: #30080

PR-URL: #30087
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>

The use of dashes -- in general, but especially in our docs -- can be
problematic. It is used inconsistently and there is always another form
of punctuation that is as good or better for the situation. In an effort
to reduce the number of variations we use to display the same types of
information, remove the various uses of dashes from the documentation.

PR-URL: #30101
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>

Delete "a number of" phrases in the docs. See what I did there? Ha ha.
Ha ha. Ha. ...heh.. <clears throat/>

PR-URL: #30103
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>

Use `tail -n 102 doc/api/n-api.md | LC_ALL=C sort -u` to establish a
systematic order for the references.

PR-URL: #30124
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: legendecas <legendecas@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>

Revise os.md, mostly making it more concise. In one case, process.md was
revised as well to be consistent with a revision in os.md.

PR-URL: #30102
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>

Instead of telling someone "It is important to do X", just tell them to
"Do X."

PR-URL: #30108
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>

Use fs.promises for read and write file
Use unified().process wich is async instead processSync
html and json are write in parallel
errors are logged and exit process with `1` code

Fixes: #30090

PR-URL: #30106
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>

PR-URL: #29983
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>

PR-URL: #30138
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>

Update ESLint to 6.6.0

PR-URL: #30123
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Yongsheng Zhang <zyszys98@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>

See: nodejs/readable-stream#420

PR-URL: #30140
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: Beth Griggs <Bethany.Griggs@uk.ibm.com>

This splits out code from InitializeContext into a
new function InitializeContextForSnapshot and
moves the callsite of InitializeContextRuntime from
NewContext to InitializeContext - embedders don't
necessarily call NewContext and so need to be able
to guarantee these functions are called regardless.

PR-URL: #30067
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>

Avoid Runtime Deprecations when an alias or a stub/no-op will suffice.
An alias or stub will have lower maintenance costs for end users.

Refs: #29989 (comment)

PR-URL: #30153
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>

As it is, if `X begins with './' or '/' or '../'` (step 3), it reads
as if it were possible for the algorithm to do a node_modules lookup
(step 4). But that doesn't seem to reflect the actual logic.

PR-URL: #29940
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Jan Krems <jan.krems@gmail.com>
Reviewed-By: Ruben Bridgewater <ruben@bridgewater.de>
Reviewed-By: Anto Aravinth <anto.aravinth.cse@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>

Describes the meaning of the boolean return in process.send()
(doc/api/process.md) and worker.send() (doc/api/cluster.md) as
described in subprocess.send() (doc/api/child_process.md)

Fixes: #26995
PR-URL: #29868
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>

Moving some relatively inactive Collaborators to emeriti. In all cases,
the Collaborator has been emailed and responded that they were fine with
this change.

PR-URL: #30177
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Сковорода Никита Андреевич <chalkerx@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>

PR-URL: #30164
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>

Add line in doc/http2.md for 'timeout' event which tell readers
that 'timeout' event doesn't except any arguments.

Refs: nodejs/help#877
PR-URL: #30161
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>

The configure script was searching for 'nghttp2' whereas the actual name
of the package is 'libnghttp2'.

This change also removes the hack for libcares in one fell swoop.

Co-Authored-By: legendecas <legendecas@gmail.com>

PR-URL: #30145
Fixes: #30113
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Chengzhong Wu <legendecas@gmail.com>

PR-URL: #30142
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>

Due to how the Environment class is used through the codebase,
there are a lot of includes referencing either env.h or env-inl.h.
This can cause that when any development touches those libraries,
a lot of files have to be recompiled.
This commit attempts to change those includes by forward declarations
when possible to mitigate the issue.

Refs: #27531

PR-URL: #30133
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>

PR-URL: #30149
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>

As discussed in
#30129 (comment), when
we vendor in code, we own the Syntax Errors in that code.  This PR adds
The `.flake8` config file at the root of this repo puts blinders on the
linting of our dependencies so this test disables that file before
linting.

fixup: allow_failures until dependencies pass

PR-URL: #30143
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>

Original commit message:

    [api] Fix handle leak when getting Context embedder data

    The `Context::SlowGetAlignedPointerFromEmbedderData()` method returns
    a pointer, so the fact that it allocates handles is not obvious to
    the caller.

    Since this is the slow path anyway, simply add a handle scope inside
    of it.

    The tests are also modified to perform the same check for the
    `Object` equivalent of this method.

    Change-Id: I5f03c9a7b70b3a17315609df021606a53c9feb2d
    Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1879902
    Reviewed-by: Yang Guo <yangguo@chromium.org>
    Commit-Queue: Yang Guo <yangguo@chromium.org>
    Cr-Commit-Position: refs/heads/master@{#64583}

Refs: v8/v8@e5dbc95
Fixes: #30127
PR-URL: #30130
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>

```
./tools/gyp/gyptest.py:61:47: F821 undefined name 'opts'
    extra_path = [os.path.abspath(p) for p in opts.path]
                                              ^
```
`opts.path` is an undefined name in this context while `args.path` is
used on the preceding line and is defined on line 48.  Undefined names
have the potential to raise `NameError` at runtime which will halt the
script.

PR-URL: #30144
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>

PR-URL: #30148
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>

PR-URL: #30146
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Reviewed-By: Shelley Vohr <codebytere@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>

PR-URL: #30163
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>

To redirect people to the help and website repos.

PR-URL: #30172
Refs: https://github.blog/changelog/2019-10-28-new-issue-template-configuration-options/
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Tobias Nießen <tniessen@tnie.de>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Beth Griggs <Bethany.Griggs@uk.ibm.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>

PR-URL: #30181
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gus Caplan <me@gus.host>
Reviewed-By: David Carlier <devnexen@gmail.com>

Line added in the description of http2 aborted event
that it's listener does not expect any arguments.

Refs: nodejs/help#877
PR-URL: #30179
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>

Refs: #30163
PR-URL: #30204
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>

The link is to a heading in the file, but is missing the #

PR-URL: #30188
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Trivikram Kamat <trivikr.dev@gmail.com>

PR-URL: #30208
Reviewed-By: Christian Clauss <cclauss@me.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
Reviewed-By: David Carlier <devnexen@gmail.com>

Original commit message:

    [postmortem] Load files using utf-8 to support Python 3

    Change-Id: I174d38cc33210c07d1a7596627e1b2d21bb06313
    Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1895560
    Reviewed-by: Mathias Bynens <mathias@chromium.org>
    Commit-Queue: Michaël Zasso <mic.besace@gmail.com>
    Cr-Commit-Position: refs/heads/master@{#64717}

Refs: v8/v8@a7dffcd

PR-URL: #30218
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: David Carlier <devnexen@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Chengzhong Wu <legendecas@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>