deps: upgrade npm to 7.5.1

deps/npm/AUTHORS

@@ -748,3 +748,5 @@ Jeff Griffiths <jeff@eko-recordings.ca>
 Michael Garvin <gar+gh@danger.computer>
 Gar <gar+gh@danger.computer>
 dr-js <dr@dr.run>
+Pavan Bellamkonda <31280326+pavanbellamkonda@users.noreply.github.com>
+Alexander Riccio <test35965@gmail.com>

deps/npm/CHANGELOG.md

@@ -1,3 +1,45 @@
+## v7.5.1 (2021-02-01
+
+### BUG FIXES
+
+* [`0ea134e41`](https://github.com/npm/cli/commit/0ea134e4190f322138299c51672eab5387ec41bb)
+  [#2587](https://github.com/npm/cli/issues/2587)
+  pass all settings through to pacote.packument, fixes #2060
+  ([@nlf](https://github.com/nlf))
+* [`8c5ca2f51`](https://github.com/npm/cli/commit/8c5ca2f516f5ac87f3bbd7f1fd95c0b283a21f14)
+  Add test for npm-usage.js, and fix 'npm --long' output
+  ([@isaacs](https://github.com/isaacs))
+
+### DEPENDENCIES
+
+* [`7e4e88e93`](https://github.com/npm/cli/commit/7e4e88e938323e34a2a41176472d8e43e84bd4dd)
+  `@npmcli/arborist@2.1.1`, `pacote@11.2.4`
+  * Properly raise ERESOLVE errors on root dev dependencies
+  * Ignore ERESOLVE errors when performing git dep 'prepare' scripts
+  * Always reinstall packages that are explicitly requested
+  * fix global update all so it actually updates things
+  * Install bins properly when global root is a link
+  ([@isaacs](https://github.com/isaacs))
+
+### DOCUMENTATION
+
+* [`23dac2fef`](https://github.com/npm/cli/commit/23dac2feff1d02193791c7e39d9e93bc9bf8e624)
+  [#2557](https://github.com/npm/cli/issues/2557)
+  npm team revamp
+  ([@ruyadorno](https://github.com/ruyadorno))
+* [`dd05ba0c0`](https://github.com/npm/cli/commit/dd05ba0c0b2f4c70eb8558c0ecc54889efbe98f5)
+  [#2572](https://github.com/npm/cli/issues/2572)
+  add note about `--force` overriding peer dependencies
+  ([@isaacs](https://github.com/isaacs))
+* [`e27639780`](https://github.com/npm/cli/commit/e276397809aceb01cc468e02a83bc6f2265376d9)
+  [#2584](https://github.com/npm/cli/issues/2584)
+  Fixed the spelling of contributor as it was written as conributor
+  ([@pavanbellamkonda](https://github.com/pavanbellamkonda))
+* [`13a5e3178`](https://github.com/npm/cli/commit/13a5e31781cdaa37d3f007e1c8583c7cb591c62a)
+  [#2502](https://github.com/npm/cli/issues/2502)
+  elaborate that npm help uses browser
+  ([@ariccio](https://github.com/ariccio))
+
 ## v7.5.0 (2021-01-28)
 
 ### FEATURES

deps/npm/CONTRIBUTING.md

@@ -29,7 +29,7 @@ $ cd ./npm && npm install
 $ npm run test
 ```
 
-**5. Open a [Pull Request](https://github.com/npm/cli/pulls) for your work & become the newest conributor to `npm`! 🎉**
+**5. Open a [Pull Request](https://github.com/npm/cli/pulls) for your work & become the newest contributor to `npm`! 🎉**
 
 ## Test Coverage
 

deps/npm/docs/content/commands/npm-team.md

@@ -14,8 +14,6 @@ npm team add <scope:team> <user>
 npm team rm <scope:team> <user>
 
 npm team ls <scope>|<scope:team>
-
-npm team edit <scope:team>
 ```
 
 ### Description
@@ -24,31 +22,76 @@ Used to manage teams in organizations, and change team memberships. Does not
 handle permissions for packages.
 
 Teams must always be fully qualified with the organization/scope they belong to
-when operating on them, separated by a colon (`:`). That is, if you have a `wombats` team in a `wisdom` organization, you must always refer to that team as `wisdom:wombats` in these commands.
+when operating on them, separated by a colon (`:`). That is, if you have a
+`newteam` team in an `org` organization, you must always refer to that team
+as `@org:newteam` in these commands.
 
-If you have two-factor authentication enabled in `auth-and-writes` mode, then you can provide a code from your authenticator with `[--otp <otpcode>]`. If you don't include this then you will be prompted.
+If you have two-factor authentication enabled in `auth-and-writes` mode, then
+you can provide a code from your authenticator with `[--otp <otpcode>]`.
+If you don't include this then you will be prompted.
 
 * create / destroy:
-  Create a new team, or destroy an existing one. Note: You cannot remove the `developers` team, <a href="https://docs.npmjs.com/about-developers-team" target="_blank">learn more.</a>
-* add / rm:
-  Add a user to an existing team, or remove a user from a team they belong to.
+  Create a new team, or destroy an existing one. Note: You cannot remove the
+  `developers` team, <a href="https://docs.npmjs.com/about-developers-team" target="_blank">learn more.</a>
+
+  Here's how to create a new team `newteam` under the `org` org:
+
+  ```bash
+  npm team create @org:newteam
+  ```
+
+  You should see a confirming message such as: `+@org:newteam` once the new
+  team has been created.
+
+* add:
+  Add a user to an existing team.
+
+  Adding a new user `username` to a team named `newteam` under the `org` org:
+
+  ```bash
+  npm team add @org:newteam username
+  ```
+
+  On success, you should see a message: `username added to @org:newteam`
+
+* rm:
+  Using `npm team rm` you can also remove users from a team they belong to.
+
+  Here's an example removing user `username` from `newteam` team
+  in `org` organization:
+
+  ```bash
+  npm team rm @org:newteam username
+  ```
+
+  Once the user is removed a confirmation message is displayed:
+  `username removed from @org:newteam`
 
 * ls:
   If performed on an organization name, will return a list of existing teams
   under that organization. If performed on a team, it will instead return a list
   of all users belonging to that particular team.
 
-* edit:
-  Edit a current team.
+  Here's an example of how to list all teams from an org named `org`:
+
+  ```bash
+  npm team ls @org
+  ```
+
+  Example listing all members of a team named `newteam`:
+
+  ```bash
+  npm team ls @org:newteam
+  ```
 
 ### Details
 
 `npm team` always operates directly on the current registry, configurable from
 the command line using `--registry=<registry url>`.
 
-In order to create teams and manage team membership, you must be a *team admin*
-under the given organization. Listing teams and team memberships may be done by
-any member of the organizations.
+You must be a *team admin* to create teams and manage team membership, under
+the given organization. Listing teams and team memberships may be done by
+any member of the organization.
 
 Organization creation and management of team admins and *organization* members
 is done through the website, not the npm CLI.
@@ -59,4 +102,5 @@ use the `npm access` command to grant or revoke the appropriate permissions.
 ### See Also
 
 * [npm access](/commands/npm-access)
+* [npm config](/commands/npm-config)
 * [npm registry](/using-npm/registry)

deps/npm/docs/content/using-npm/config.md

@@ -472,6 +472,7 @@ mistakes, unnecessary performance degradation, and malicious input.
   range (including SemVer-major changes).
 * Allow a module to be installed as a direct dependency of itself.
 * Allow unpublishing all versions of a published package.
+* Allow conflicting peerDependencies to be installed in the root project.
 
 If you don't have a clear idea of what you want to do, it is strongly
 recommended that you do not use this option!

deps/npm/docs/output/commands/npm-ls.html

@@ -159,7 +159,7 @@ <h3 id="description">Description</h3>
 the results to only the paths to the packages named.  Note that nested
 packages will <em>also</em> show the paths to the specified packages.  For
 example, running <code>npm ls promzard</code> in npm’s source tree will show:</p>
-<pre lang="bash"><code>npm@7.5.0 /path/to/npm
+<pre lang="bash"><code>npm@7.5.1 /path/to/npm
 └─┬ init-package-json@0.0.4
   └── promzard@0.1.5
 </code></pre>

deps/npm/docs/output/commands/npm-team.html

@@ -152,48 +152,73 @@ <h2 id="table-of-contents">Table of contents</h2>
 npm team rm &lt;scope:team&gt; &lt;user&gt;
 
 npm team ls &lt;scope&gt;|&lt;scope:team&gt;
-
-npm team edit &lt;scope:team&gt;
 </code></pre>
 <h3 id="description">Description</h3>
 <p>Used to manage teams in organizations, and change team memberships. Does not
 handle permissions for packages.</p>
 <p>Teams must always be fully qualified with the organization/scope they belong to
-when operating on them, separated by a colon (<code>:</code>). That is, if you have a <code>wombats</code> team in a <code>wisdom</code> organization, you must always refer to that team as <code>wisdom:wombats</code> in these commands.</p>
-<p>If you have two-factor authentication enabled in <code>auth-and-writes</code> mode, then you can provide a code from your authenticator with <code>[--otp &lt;otpcode&gt;]</code>. If you don’t include this then you will be prompted.</p>
+when operating on them, separated by a colon (<code>:</code>). That is, if you have a
+<code>newteam</code> team in an <code>org</code> organization, you must always refer to that team
+as <code>@org:newteam</code> in these commands.</p>
+<p>If you have two-factor authentication enabled in <code>auth-and-writes</code> mode, then
+you can provide a code from your authenticator with <code>[--otp &lt;otpcode&gt;]</code>.
+If you don’t include this then you will be prompted.</p>
 <ul>
 <li>
 <p>create / destroy:
-Create a new team, or destroy an existing one. Note: You cannot remove the <code>developers</code> team, <!-- raw HTML omitted -->learn more.<!-- raw HTML omitted --></p>
+Create a new team, or destroy an existing one. Note: You cannot remove the
+<code>developers</code> team, <!-- raw HTML omitted -->learn more.<!-- raw HTML omitted --></p>
+<p>Here’s how to create a new team <code>newteam</code> under the <code>org</code> org:</p>
+<pre lang="bash"><code>npm team create @org:newteam
+</code></pre>
+<p>You should see a confirming message such as: <code>+@org:newteam</code> once the new
+team has been created.</p>
+</li>
+<li>
+<p>add:
+Add a user to an existing team.</p>
+<p>Adding a new user <code>username</code> to a team named <code>newteam</code> under the <code>org</code> org:</p>
+<pre lang="bash"><code>npm team add @org:newteam username
+</code></pre>
+<p>On success, you should see a message: <code>username added to @org:newteam</code></p>
 </li>
 <li>
-<p>add / rm:
-Add a user to an existing team, or remove a user from a team they belong to.</p>
+<p>rm:
+Using <code>npm team rm</code> you can also remove users from a team they belong to.</p>
+<p>Here’s an example removing user <code>username</code> from <code>newteam</code> team
+in <code>org</code> organization:</p>
+<pre lang="bash"><code>npm team rm @org:newteam username
+</code></pre>
+<p>Once the user is removed a confirmation message is displayed:
+<code>username removed from @org:newteam</code></p>
 </li>
 <li>
 <p>ls:
 If performed on an organization name, will return a list of existing teams
 under that organization. If performed on a team, it will instead return a list
 of all users belonging to that particular team.</p>
-</li>
-<li>
-<p>edit:
-Edit a current team.</p>
+<p>Here’s an example of how to list all teams from an org named <code>org</code>:</p>
+<pre lang="bash"><code>npm team ls @org
+</code></pre>
+<p>Example listing all members of a team named <code>newteam</code>:</p>
+<pre lang="bash"><code>npm team ls @org:newteam
+</code></pre>
 </li>
 </ul>
 <h3 id="details">Details</h3>
 <p><code>npm team</code> always operates directly on the current registry, configurable from
 the command line using <code>--registry=&lt;registry url&gt;</code>.</p>
-<p>In order to create teams and manage team membership, you must be a <em>team admin</em>
-under the given organization. Listing teams and team memberships may be done by
-any member of the organizations.</p>
+<p>You must be a <em>team admin</em> to create teams and manage team membership, under
+the given organization. Listing teams and team memberships may be done by
+any member of the organization.</p>
 <p>Organization creation and management of team admins and <em>organization</em> members
 is done through the website, not the npm CLI.</p>
 <p>To use teams to manage permissions on packages belonging to your organization,
 use the <code>npm access</code> command to grant or revoke the appropriate permissions.</p>
 <h3 id="see-also">See Also</h3>
 <ul>
 <li><a href="../commands/npm-access.html">npm access</a></li>
+<li><a href="../commands/npm-config.html">npm config</a></li>
 <li><a href="../using-npm/registry.html">npm registry</a></li>
 </ul>
 </div>

deps/npm/docs/output/commands/npm.html

@@ -148,7 +148,7 @@ <h2 id="table-of-contents">Table of contents</h2>
 <pre lang="bash"><code>npm &lt;command&gt; [args]
 </code></pre>
 <h3 id="version">Version</h3>
-<p>7.5.0</p>
+<p>7.5.1</p>
 <h3 id="description">Description</h3>
 <p>npm is the package manager for the Node JavaScript platform.  It puts
 modules in place so that node can find them, and manages dependency

deps/npm/docs/output/using-npm/config.html

@@ -534,6 +534,7 @@ <h4 id="force">force</h4>
 range (including SemVer-major changes).</li>
 <li>Allow a module to be installed as a direct dependency of itself.</li>
 <li>Allow unpublishing all versions of a published package.</li>
+<li>Allow conflicting peerDependencies to be installed in the root project.</li>
 </ul>
 <p>If you don’t have a clear idea of what you want to do, it is strongly
 recommended that you do not use this option!</p>

deps/npm/lib/access.js

@@ -8,7 +8,6 @@ const output = require('./utils/output.js')
 const otplease = require('./utils/otplease.js')
 const usageUtil = require('./utils/usage.js')
 const getIdentity = require('./utils/get-identity.js')
-const { prefix } = npm
 
 const usage = usageUtil(
   'npm access',
@@ -165,7 +164,7 @@ const getPackage = async (name, requireScope) => {
     return name.trim()
   else {
     try {
-      const pkg = await readPackageJson(path.resolve(prefix, 'package.json'))
+      const pkg = await readPackageJson(path.resolve(npm.prefix, 'package.json'))
       name = pkg.name
     } catch (err) {
       if (err.code === 'ENOENT') {

deps/npm/lib/ci.js

@@ -3,6 +3,8 @@ const Arborist = require('@npmcli/arborist')
 const rimraf = util.promisify(require('rimraf'))
 const reifyFinish = require('./utils/reify-finish.js')
 const runScript = require('@npmcli/run-script')
+const fs = require('fs')
+const readdir = util.promisify(fs.readdir)
 
 const log = require('npmlog')
 const npm = require('./npm.js')
@@ -13,6 +15,16 @@ const completion = require('./utils/completion/none.js')
 
 const cmd = (args, cb) => ci().then(() => cb()).catch(cb)
 
+const removeNodeModules = async where => {
+  const rimrafOpts = { glob: false }
+  process.emit('time', 'npm-ci:rm')
+  const path = `${where}/node_modules`
+  // get the list of entries so we can skip the glob for performance
+  const entries = await readdir(path, null).catch(er => [])
+  await Promise.all(entries.map(f => rimraf(`${path}/${f}`, rimrafOpts)))
+  process.emit('timeEnd', 'npm-ci:rm')
+}
+
 const ci = async () => {
   if (npm.flatOptions.global) {
     const err = new Error('`npm ci` does not work for global packages')
@@ -33,7 +45,7 @@ const ci = async () => {
         'later to generate a package-lock.json file, then try again.'
       throw new Error(msg)
     }),
-    rimraf(`${where}/node_modules/*`, { glob: { dot: true, nosort: true, silent: true } }),
+    removeNodeModules(where),
   ])
   // npm ci should never modify the lockfile or package.json
   await arb.reify({ ...npm.flatOptions, save: false })

deps/npm/lib/help-search.js

@@ -135,12 +135,11 @@ const searchFiles = async (args, data, files) => {
 
   // coverage is ignored here because the contents of results are
   // nondeterministic due to either glob or readFiles or Object.entries
-  return results.sort((a, b) =>
+  return results.sort(/* istanbul ignore next */ (a, b) =>
     a.found.length > b.found.length ? -1
     : a.found.length < b.found.length ? 1
     : a.totalHits > b.totalHits ? -1
     : a.totalHits < b.totalHits ? 1
-    /* istanbul ignore next */
     : a.lines.length > b.lines.length ? -1
     : a.lines.length < b.lines.length ? 1
     : 0).slice(0, 10)

deps/npm/lib/outdated.js

@@ -108,6 +108,7 @@ async function outdated_ (tree, deps, opts) {
 
   async function getPackument (spec) {
     const packument = await pacote.packument(spec, {
+      ...npm.flatOptions,
       fullMetadata: npm.flatOptions.long,
       preferOnline: true,
     })

deps/npm/lib/utils/ansi-trim.js

@@ -1,7 +1,3 @@
-function ansiTrim (str) {
-  var r = new RegExp('\x1b(?:\\[(?:\\d+[ABCDEFGJKSTm]|\\d+;\\d+[Hfm]|' +
-        '\\d+;\\d+;\\d+m|6n|s|u|\\?25[lh])|\\w)', 'g')
-  return str.replace(r, '')
-}
-
-module.exports = ansiTrim
+const r = new RegExp('\x1b(?:\\[(?:\\d+[ABCDEFGJKSTm]|\\d+;\\d+[Hfm]|' +
+          '\\d+;\\d+;\\d+m|6n|s|u|\\?25[lh])|\\w)', 'g')
+module.exports = str => str.replace(r, '')