Skip to content

phoerious/rs-backup-suite

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

rs-backup-suite

rs-backup-suite is a set of shell scripts for setting up a custom NAS on a computer in the network. It uses rsync and rsnapshot.

How it works

rs-backup-suite is designed for push backups, which means the client pushes its files to the server. This is ideal for computers which are not always on such as most desktop PCs.

It is also a user-centric backup system. That means each user creates his own backup on the NAS instead of root backing up the whole machine at once (although this is possible). That also means that each user has a UNIX account on the NAS. The NAS username is usually <hostname>-<local user name> (e.g. mymachine-johndoe).

On the client machine(s) each user can create a file called .rs-backup/include-files (name is configurable) inside his home directory which includes the list of files that should be considered by the backup. Additionally root can maintain a similar file located at /etc/rs-backup/include-files for the system files.

Setup (please read this carefully before performing any actions!)

rs-backup-suite is split into two parts: a client part for pushing the backup to the NAS and a server part which runs on the NAS itself.

NOTE: Any command that necessarily needs to be run as root is preceded by sudo in this document. If sudo is not available on your system, make sure you are running the command in a root shell (e.g. using su).

Server

For installing the server component run

sudo ./install.sh server

on your server machine. This installs all the necessary files into the right location on your system.

Tweaking the configuration file

If you need to tweak the server settings, simply edit /etc/rs-backup/server-config to your needs. There you can configure the following directives:

  • BACKUP_ROOT: The directory under which the home directories of the backup users are stored. The default is /bkp
  • FILES_DIR: The directory under which the actual backups are kept (relative to the backup user's home directory). The default is files.
  • SET_QUOTA: Whether to set disk quota for the users or not (for Ext3/4 file systems). Default is false.
  • QUOTA_SOFT_LIMIT, QUOTA_HARD_LIMIT, QUOTA_INODE_SOFT_LIMIT, QUOTA_INODE_HARD_LIMIT: The individual limits for disk quota. Ignored, if SET_QUOTA is false.
  • CONFIG_PREFIX: user-relative configuration directory prefix (default: .rs-backup)

WARNING: Adjust these settings before you create backup users, because they won't be re-applied for already existing users!

Adding a backup user

A backup user is an unprivileged UNIX account on the server. Normally each user on each client has one corresponding backup user which he uses to log into the NAS. A backup user can be created by running

sudo rs-add-user hostname username [ssh-public-key-file]

on the server where hostname is the name of the client host and username is the name of the user on that machine for whom this account is made. Of course you can use any other names for hostname and username as well, but it's generally a good idea to stick to this naming convention. The resulting UNIX username will be the combination of both.

The optional third parameter specifies the path to the SSH public key file which the user will use to log into the NAS. If you don't specify it, the user won't be able to log in at all. But you can add one later at any time by running

sudo rs-add-ssh-key hostname username ssh-public-key-file

hostname and username are the same as above and mandatory for identifying the user that should get the new key.

TIP: If you don't remember the parameters for all these commands, simply run them without any and you'll get simple usage instructions.

Making the chroot work

rs-backup-suite can chroot backup users into the backup home base directory. For this to work you need to create a few bind mounts. The install script already created the respective lines in your /etc/fstab for you. If you don't need any special configuration on your system, all you need to do is to uncomment everything between the BEGIN and END lines (do NOT change these two lines, though):

# BEGIN: rs-backup-suite
#/bin               /bkp/bin                none    bind               0    0
#/bin               /bkp/bin                none    remount,ro,bind    0    0
#/lib               /bkp/lib                none    bind               0    0
#/lib               /bkp/lib                none    remount,ro,bind    0    0
#/dev               /bkp/dev                none    bind               0    0
#/dev               /bkp/dev                none    remount,ro,bind    0    0
#/usr/bin           /bkp/usr/bin            none    bind               0    0
#/usr/bin           /bkp/usr/bin            none    remount,ro,bind    0    0
#/usr/lib           /bkp/usr/lib            none    bind               0    0
#/usr/lib           /bkp/usr/lib            none    remount,ro,bind    0    0
#/usr/share/perl5   /bkp/usr/share/perl5    none    bind               0    0
#/usr/share/perl5   /bkp/usr/share/perl5    none    remount,ro,bind    0    0
# END: rs-backup-suite

The necessary mounts may differ from system to system. For instance, Ubuntu needs /usr/share/perl instead of /usr/share/perl5. Synology DSM doesn't need /usr/share/* at all, but requires /opt/bin, /opt/lib and /opt/libexec. But in most cases you don't need to worry about that since the install script tries to make the correct decisions for you.

NOTE: If your 64-bit system doesn't have a /lib folder but only /lib64 you may need to change the /lib line in your /etc/fstab as follows:

/lib64               /bkp/lib64                none    bind               0    0
/lib64               /bkp/lib64                none    remount,ro,bind    0    0

Don't forget to rename /bkp/lib to /bkp/lib64. The do the same with /usr/lib / /usr/lib64.

When you're done, add this to the end of your /etc/ssh/sshd_config:

Match Group backup 
    ChrootDirectory /bkp/

and restart OpenSSH. Your backup users are now chrooted into /bkp.

NOTE: When using a chroot environment and you change anything in your user configuration (e.g. the username) you need to run rs-update-passwd or your user might not be able to log in anymore.

NOTE about logging: Be aware that logging of backup success or failure on the server side will not work in a chroot environment since we mounted all our binds read-only. Additionally, certain files and libraries needed by the syslog facility may not be available. So if you want server-side logging, you cannot use chroot. Client-side logging will still work, of course.

Changing the rotation options/backup levels

To change how many increments of which level are kept, edit the file /bkp/etc/rsnapshot.global.conf. This is the global configuration file for rsnapshot which will be included in each user-specific configuration. There you can tweak the names and numbers for all backup levels.

If you add or remove any backup levels, make sure you also update the cron scripts. By default three cron scripts are installed: /etc/cron.daily/rs-backup-rotate, /etc/cron.weekly/rs-backup-rotate and /etc/cron.monthly/rs-backup-rotate.

Quota support

rs-backup-suite directly supports Linux file system quota. To make use of it, you need to enable quota for your backup drive first (i.e install the necessary utility packages, mount the backup drive with needed mount options and initialize quota files). This is pretty much straight-forward and not in any way different to any other Linux system. If you need assistance with setting up quota, I recommend you read this quota guide.

Once disk quota are set up, you can change the value of SET_QUOTA in /etc/rs-backup/server-config to true and tweak the QUOTA_* directives to your liking. Any new user you create with rs-add-user will now be assigned these initial default quota.

Of course you can change these default quota at any time using rs-setquota. For instance:

sudo rs-setquota local-username 500G 505G 4M 5M

This sets soft quota for the user local-username to 500GiB, hard quota to 505GiB, inode soft limit to 4194304 and inode hard limit to 5242880. You can, of course, set quota like this even when SET_QUOTA is false.

Editing quota using native Linux quota tools (i.e. setquota or edquota) is also possible (in fact, rs-setquota only provides a more user-friendly frontend to setquota).

Client

To set up the client you simply need to run

sudo ./install.sh client

on your client machine. Then open the file /etc/rs-backup/client-config as root and replace the value of REMOTE_HOST with the hostname or IP address of your NAS.

On the client machines the script /usr/bin/rs-backup-run is used for performing the backups. This script can either be run as root or as an unprivileged user. The behavior differs in both cases:

  • If run as root, all files and folder specified in /etc/rs-backup/include-files will be backed up. The backup user used for logging into the NAS is hostname-root by default (where hostname is the hostname of the current machine). Additionally the home directories of all users will be scanned. If a home directory contains a file called .rs-backup/include-files all files and folders specified inside that file will be backed up under this user's privileges. The username used for logging into the NAS is hostname-username (where hostname is again substituted for the hostname of the current machine and username for the user whose home directory is being backed up).
  • If run as a normal user, only the files that are specified in your own .rs-backup/include-files will be backed up.

Changing the default configuration

All the client configuration options are defined in /etc/rs-backup/client-config. You can edit the file as you wish. All parameters are documented clearly by comments. Most of these configuration options can also be overridden at runtime by passing command line arguments to rs-backup-run. For a list and a description of all possible command line arguments run

rs-backup-run --help

Installing client and server on the same machine

You can of course also install server and client on the same machine. This may be useful if you want, e.g. save your data to an external USB drive instead of a real NAS. A shortcut for running both sudo ./install server and sudo ./install client is simply running

sudo ./install all

Uninstalling

For uninstalling run

sudo ./uninstall.sh [all|server|client]

This removes all the scripts but preserves the data in /bkp (or whatever your backup folder is).

Backup strategies

The intended use case for rs-backup-suite is as follows: you set up the server part on your NAS. Then you create a backup user for each user on each client machine.

Cron

In the next step you edit the crontab for root on each client and add a job for running /usr/bin/rs-backup-run at certain times. You can of course also create a shell script that calls rs-backup-run and put it in /etc/cron.daily to perform a global backup once a day.

Alternative: systemd

Since version 0.2.5, rs-backup-run comes with systemd unit files which you can use for automatically running daily backups instead. To enable the timer, run

systemctl enable rs-backup-run.timer
systemctl start rs-backup-run.timer

This will enable the timer when booting the system. By default, the timer is set to run once every day (or immediately if the system was down during the last timer tick).

You can also start a full system backup manually at any time by running

systemctl start rs-backup-run.service

Inclusion patterns

After everything is set up that way you create the file /etc/rs-backup/include-file and write to it a list of files and folders you want to back up as root (e.g. you can specify /etc/*** to backup the whole /etc directory and all its subdirectories). Furthermore each user creates a file called .rs-backup/include-files inside his home directory that serves the same purpose for his own home directory instead of the global system. Such a file could look like this:

- /home/johndoe/.cache/***
/home
/home/johndoe/***

Lines that start with a - are treated as excludes, all other lines as includes. The three asterisks mean “Include this directory and everything below”. For more information about these globbing patterns read the FILTER RULES section of the rsync(1) man page.

NOTE: To include a directory you need to mark all parent directories for inclusion, too. For instance to include /home/johndoe you also need to include /home as shown above. But don't confuse /home with /home/! /home without the trailing slash only selects the (empty) directory itself, not its contents.

Restoring files from the NAS

To restore files from the NAS server simply run:

rsync -a -e ssh backupuser@remotehost::pull/source/path /destination/path

Replace backupuser with the proper backup user (e.g. mymachine-johndoe) and remotehost with the hostname of the NAS. /source/path is the file name on the remote side (e.g. /daily.2/home/johndoe/foobar) and /destination/path is the local destination file name.

You can also log into the NAS using SFTP or SSHFS. This is probably more convenient for browsing available files.

Be aware that both access methods are strictly read-only! Write access is only granted via rsync through the push module:

rsync -a -e ssh backupuser@remotehost::push/destination/path /source/path

Side note

Because rs-backup-suite uses rsync for the client-server communication you don't necessarily need both parts. As long as you have a working rsync server on your NAS you can use the client script to push files to it. On the other hand you can use the rs-backup-suite server part with any other rsync client, as well.

Special systems

rs-backup-suite is designed to work on most generic Linux systems, but some embedded systems may require some extra love (especially those running on busybox):

Synology DSM

To run the server component on Synology DSM, you need to install the following packages via Entware-ng / opkg:

  • rsnapshot
  • openssh-sftp-server
  • util-linux-ng
  • logger

In /etc/ssh/sshd_config make sure you replace whatever line contains the subsystem configuration for the sftp server with

Subsystem    sftp    /opt/libexec/sftp-server

and restart the SSH server using the configuration utility from the web interace. If you are using the synoservicectl utility from the command line instead, make sure you are actually starting the correct SSH server from /usr/sbin and not from /opt/sbin (although that works as well, but would have a different configuration file).

If you want to run your backups in a chroot environment please note that /etc/fstab will be reset to its defaults when rebooting the disk station. To avoid configuration loss, no mount directives are added to /etc/fstab by the install script. Instead the following entries are added to /usr/local/etc/rc.d/10-rs-backup-suite.sh (which won't be overwritten upon reboot or when performing an upgrade).

mounts() {
    mount -o bind            /bin                        ::BACKUP_ROOT::/bin
    mount -o remount,ro,bind ::BACKUP_ROOT::/bin
    mount -o bind            /lib                        ::BACKUP_ROOT::/lib
    mount -o remount,ro,bind ::BACKUP_ROOT::/lib
    mount -o bind            /dev                        ::BACKUP_ROOT::/dev
    mount -o remount,ro,bind ::BACKUP_ROOT::/dev
    mount -o bind            /usr/bin                    ::BACKUP_ROOT::/usr/bin
    mount -o remount,ro,bind ::BACKUP_ROOT::/usr/bin
    mount -o bind            /opt/bin                    ::BACKUP_ROOT::/opt/bin
    mount -o remount,ro,bind ::BACKUP_ROOT::/opt/bin
    mount -o bind            /opt/lib                    ::BACKUP_ROOT::/opt/lib
    mount -o remount,ro,bind ::BACKUP_ROOT::/opt/lib
    mount -o bind            /opt/libexec                ::BACKUP_ROOT::/opt/libexec
    mount -o remount,ro,bind ::BACKUP_ROOT::/opt/libexec
}

if [ "$1" == "start" ]; then
	#mounts
fi

To enable the mounts, uncomment the mounts call between if and fi. Afterwards either run the script by hand once or reboot. Of course, don't forget to also set the correct chroot path in /etc/ssh/sshd_config and restart the SSH daemon:

Match Group backup 
    ChrootDirectory /var/services/homes/

Cygwin

The server component is incompatible with Cygwin for several reasons, but the client component works just fine. At the moment, though, there is no root mode for backing up all home directories at once. Desktop notifications are also unsupported.

Warning to users of older versions

rs-backup used to reside in /usr/local instead of /usr. With the addition of a proper Makefile in version 0.2.0 this has changed. The consequence is that older setups won't work with the new version without modifications. In order to update your setup you need to update the path to rs-run-ssh-cmd (now at /usr/bin/rs-run-ssh-cmd) inside your users' ~/.ssh/authorized_keys files as well as the path to rs-rotate (/usr/bin/rs-rotate) inside their rsync.conf files. Alternatively just create symlinks to the old locations.

Moving rs-backup to /usr also means that for chroot setups the /bkp/usr/local mountpoint is no longer needed.