Skip to content

prateekchaudhry/amazon-ecs-init

 
 

Repository files navigation

Amazon Elastic Container Service RPM

Build Status

The Amazon Elastic Container Service RPM is software developed to support the Amazon ECS Container Agent. The Amazon ECS RPM is packaged for RPM-based systems that utilize Upstart as the init system.

Behavior

The upstart script installed by the Amazon ECS RPM runs at the completion of runlevel 3, 4, or 5 as the system starts. The script will clean up any previous copies of the Amazon ECS Container Agent, and then start a new copy. Logs from the RPM are available at /var/log/ecs/ecs-init.log, while logs from the Amazon ECS Container Agent are available at /var/log/ecs/ecs-agent.log. The Amazon ECS RPM makes the Amazon ECS Container Agent introspection endpoint available at http://127.0.0.1:51678/v1. Configuration for the Amazon ECS Container Agent is read from /etc/ecs/ecs.config. All of the configurations in this file are used as environment variables of the ECS Agent container. Additionally, some configurations can be used to configure other properties of the ECS Agent container, as described below.

Configuration Key Example Value(s) Description Default value
ECS_AGENT_LABELS {"test.label.1":"value1","test.label.2":"value2"} The labels to add to the ECS Agent container.

Additionally, the following environment variable(s) can be used to configure the behavior of the RPM:

Environment Variable Name Example Value(s) Description Default value
ECS_SKIP_LOCALHOST_TRAFFIC_FILTER <true | false> By default, the ecs-init service adds an iptable rule to drop non-local packets to localhost if they're not part of an existing forwarded connection or DNAT, and removes the rule upon stop. If ECS_SKIP_LOCALHOST_TRAFFIC_FILTER is set to true, this rule will not be added/removed. false
ECS_ALLOW_OFFHOST_INTROSPECTION_ACCESS <true | false> By default, the ecs-init service adds an iptable rule to block access to ECS Agent's introspection port from off-host (or containers in awsvpc network mode), and removes the rule upon stop. If ECS_ALLOW_OFFHOST_INTROSPECTION_ACCESS is set to true, this rule will not be added/removed. false
ECS_OFFHOST_INTROSPECTION_INTERFACE_NAME eth0 Primary network interface name to be used for blocking offhost agent introspection port access. By default, this value is eth0 eth0

The above environment variable(s) can be used in the following way

  • On Amazon Linux 1, the flag ECS_SKIP_LOCALHOST_TRAFFIC_FILTER can be turned on by adding env ECS_SKIP_LOCALHOST_TRAFFIC_FILTER=true to /etc/init/ecs.conf.
  • On Amazon Linux 2, the flag ECS_SKIP_LOCALHOST_TRAFFIC_FILTER can be turned on by adding ECS_SKIP_LOCALHOST_TRAFFIC_FILTER=true to /etc/ecs/ecs.config.

Usage

The upstart script installed by the Amazon Elastic Container Service RPM can be started or stopped with the following commands respectively:

  • sudo start ecs
  • sudo stop ecs

Updates

Updates to the Amazon ECS Container Agent should be performed through the Amazon ECS Container Agent. In the case where an update failed and the Amazon ECS Container Agent is no longer functional, a rollback can be initiated as follows:

  1. sudo stop ecs
  2. sudo /usr/libexec/amazon-ecs-init reload-cache
  3. sudo start ecs

Security disclosures

If you think you’ve found a potential security issue, please do not post it in the Issues. Instead, please follow the instructions here or email AWS security directly.

Development

Dev dependencies

Run make get-deps to get dependencies for running tests and generating mocks.

Generating mocks

Mocks can be generated using the make generate Makefile target. NOTE that this must be run on a linux machine.

License

The Amazon Elastic Container Service RPM is licensed under the Apache 2.0 License.

About

Amazon Elastic Container Service RPM

Resources

License

Code of conduct

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Go 84.9%
  • Shell 10.9%
  • Makefile 2.2%
  • Roff 1.1%
  • Other 0.9%