Redundancy Cells

This repository contains various modules used to add redundancy.

On-Demand Redundancy Grouping (ODRG_unit)

The ODRG_unit is designed as a configurable bridge between three ibex cores, allowing for independent operation or lock-step operation with majority voting, triggering an interrupt in case a mismatch is detected. It uses lowrisc's reggen tool to generate the required configuration registers.

Testing

ODRG is integrated in the PULP cluster and the PULP system. To test, please use the space_pulp branch.

Citing

If you are using ODRG in your academic work you can cite us:

@INPROCEEDINGS{9912026,
  author={Rogenmoser, Michael and Wistoff, Nils and Vogel, Pirmin and Gürkaynak, Frank and Benini, Luca},
  booktitle={2022 IEEE Computer Society Annual Symposium on VLSI (ISVLSI)}, 
  title={On-Demand Redundancy Grouping: Selectable Soft-Error Tolerance for a Multicore Cluster}, 
  year={2022},
  volume={},
  number={},
  pages={398-401},
  doi={10.1109/ISVLSI54635.2022.00089}
}

Maintenance

To re-generate regfile, run following command in the root directory of this repo.

make gen_ODRG

This will generate the register file SV-code, its corresponding C-code and documentation using lowrisc's reggen tool via the pulp register-interface repository.

ECC encoders and decoders

The hsiao_ecc encoder, decoder, and corrector are based on lowRISC's Hsiao ECC implementation, with an adapted algorithm to deterministically find an appropriate Hsiao matrix. They are implemented in SystemVerilog for efficient parametrization, replacing the generated lowRISC modules.

The lowRISC ECC encoders and decoders are imported using bender's vendor command. To re-import and re-generate the prim_secded_ modules run

make gen_ECC

ECC wrapper for SRAM

ecc_sram_wrap.sv is a wrapper for the tc_sram tech_cell to add ecc in a customizable fashion. It interfaces a modified TCDM_BANK_MEM_BUS.Slave defined in pulp_soc with the memory, implementing a load-and-store architecture for writes where not the full word is written. As this requires an additional cycle, a gnt signal is exposed, delaying the subsequent transaction if necessary.

ECC scrubber

ecc_scrubber.sv is a scrubber unit to attach to an ecc-protected memory bank. When triggered, read the next address to detect if a fault has occurred, correcting it if required and logging the number of corrections. It will always give way to other memory accesses and stall to avoid increased latency.

ECC translators for data bus interfaces

The BUS_enc_dec encoders and decoders add or remove ECC to the parametrized XBAR_TCDM_BUS, XBAR_PE_BUS, and XBAR_DEMUX_BUS, defined in pulp_interfaces.sv, as well as AXI_BUS.

The DropECC parameter allows for a faster signal along the decode data path, not correcting the errors but still calculating if an error exists.

Triple Modular Redundancy majority voters

The TMR_voters are Triple Modular Redundancy majority voters, based on research indicated in the corresponding files. To detect the failing module, additional signals are implemented in higher-level modules.

Testing

To run tests, execute the following command:

./run_tests.sh

A bender installation >=v0.27 is required.