Skip to content

rancher/rancherd

Repository files navigation

Rancherd

WARNING

  • The project intends to be used in Harvester project at this moment. The Harvester team does its best effort to support general uses.
  • For "RancherD" (the tool came with Rancher 2.5) issues, please report them in the Rancher project.

Rancherd bootstraps a node with Kubernetes (k3s/rke2) and Rancher such that all future management of Kubernetes and Rancher can be done from Kubernetes. Rancherd will only run once per node. Once the system has been fully bootstrapped it will not run again. It is intended that the primary use of Rancherd is to be ran from cloud-init or a similar system.

Quick Start

To create a three node cluster run the following on servers named server1, server2, and server3.

On server1

mkdir -p /etc/rancher/rancherd
cat > /etc/rancher/rancherd/config.yaml << EOF
role: cluster-init
token: somethingrandom
EOF
curl -fL https://raw.githubusercontent.com/rancher/rancherd/master/install.sh | sh -

On server2

mkdir -p /etc/rancher/rancherd
cat > /etc/rancher/rancherd/config.yaml << EOF
role: server
server: https://server1:8443
token: somethingrandom
EOF
curl -fL https://raw.githubusercontent.com/rancher/rancherd/master/install.sh | sh -

On server3

mkdir -p /etc/rancher/rancherd
cat > /etc/rancher/rancherd/config.yaml << EOF
role: server
server: https://server1:8443
token: somethingrandom
EOF
curl -fL https://raw.githubusercontent.com/rancher/rancherd/master/install.sh | sh -

Installation

cloud-init

The primary way of running Rancherd is intended to be done from cloud-init. Add to your cloud-init the following for a single node cluster. All configuration that would be found in the rancherd config.yaml should be embedded in the rancherd key in the cloud-config.

#cloud-config
rancherd:
  role: cluster-init
runcmd:
  - curl -fL https://raw.githubusercontent.com/rancher/rancherd/master/install.sh | sh -

Manual

rancherd binary can be downloaded from https://github.com/rancher/rancherd/releases/latest and manually ran.

Curl script (systemd installation)

The below command will download rancherd binary and setup a systemd unit and run it.

curl -sfL https://raw.githubusercontent.com/rancher/rancherd/master/install.sh | sh -

Cluster Initialization

Creating a cluster always starts with one node initializing the cluster, by assigning the cluster-init role and then other nodes joining to the cluster. The new cluster will have a token generated for it or you can manually assign a unique string. The token for an existing cluster can be determined by running rancherd get-token.

Joining Nodes

Nodes can be joined to the cluster as the role server to add more control plane nodes or as the role agent to add more worker nodes. To join a node you must have the Rancher server URL (which is by default running on port 8443) and the token.

Node Roles

Rancherd will bootstrap a node with one of the following roles

  1. cluster-init: Every cluster must start with one node that has the cluster-init role.
  2. server: Joins the cluster as a new control-plane,etcd,worker node
  3. agent: Joins the cluster as a worker only node.

Server discovery

It can be quite cumbersome to automate bringing up a clustered system that requires one bootstrap node. Also there are more considerations around load balancing and replacing nodes in a proper production setup. Rancherd support server discovery based on https://github.com/hashicorp/go-discover.

When using server discovery the cluster-init role is not used, only server and agent. The server URL is also dropped in place of using the discovery key. The discovery configuration will be used to dynamically determine what is the server URL and if the current node should act as the cluster-init node.

Example

role: server
discovery:
  params:
    # Corresponds to go-discover provider name
    provider: "mdns"
    # All other key/values are parameters corresponding to what 
    # the go-discover provider is expecting
    service: "rancher-server"
  # If this is a new cluster it will wait until 3 server are 
  # available and they all agree on the same cluster-init node
  expectedServers: 3
  # How long servers are remembered for. It is useful for providers
  # that are not consistent in their responses, like mdns.
  serverCacheDuration: 1m

More information on how to use the discovery is in the config examples.

Configuration

Configuration for rancherd goes in /etc/rancher/rancherd/config.yaml. A full example configuration with documentation is available in config-example.yaml.

Minimal configuration

# /etc/rancher/rancherd/config.yaml

# role: Valid values cluster-init, server, agent
role: cluster-init

# token: A shared secret known by all clusters in the system
token: somethingrandom

# server: The server URL to join a cluster to. By default port 8443.
#         Only valid for roles server and agent, not cluster-init
server: https://example.com:8443

Version Channels

The kubernetesVersion and rancherVersion accept channel names instead of explict versions.

Valid kubernetesVersion channels are as follows:

Channel Name Description
stable k3s stable (default value of kubernetesVersion)
latest k3s latest
testing k3s test
stable:k3s Same as stable channel
latest:k3s Same as latest channel
testing:k3s Same as testing channel
stable:rke2 rke2 stable
latest:rke2 rke2 latest
testing:rke2 rke2 testing
v1.21 Latest k3s v1.21 release. The applies to any Kubernetes minor version
v1.21:rke2 Latest rke2 v1.21 release. The applies to any Kubernetes minor version

Valid rancherVersions channels are as follows:

Channel Name Description
stable stable helm repo (default value of rancherVersion)
latest latest helm repo

Rancher Config

By default Rancher is installed with the following values.yaml. You can override any of these settings with the rancherValues setting in the rancherd config.yaml

# Multi-Cluster Management is disabled by default, change to multi-cluster-management=true to enable
features: multi-cluster-management=false

# The Rancher UI will run on the host port 8443 by default. Set to 0 to disable
# and instead use ingress.enabled=true to route traffic through ingress
hostPort: 8443

# Accessing ingress is disabled by default.
ingress:
  enabled: false
  
# Don't create a default admin password
noDefaultAdmin: true

# The negative value means it will up to that many replicas if there are
# at least that many nodes available.  For example, if you have 2 nodes and
# `replicas` is `-3` then 2 replicas will run.  Once you add a third node
# a then 3 replicas will run
replicas: -3

# External TLS is assumed
tls: external

A full reference of all parameters in the values.yaml is available in the Rancher repo.

Dashboard/UI

The Rancher UI is running by default on port :8443. There is no default admin user password set. You must run rancherd reset-admin once to get an admin password to login.

Multi-Cluster Management

By default Multi Cluster Managmement is disabled in Rancher. To enable set the following in the rancherd config.yaml

rancherValues:
  features: multi-cluster-management=true

Upgrading

rancherd itself doesn't need to be upgraded. It is only ran once per node and then after that provides no value. What you do need to upgrade after the fact is Rancher and Kubernetes.

Rancher

Rancher is installed as a helm chart following the standard procedure. You can upgrade Rancher with the standard procedure documented at https://rancher.com/docs/rancher/v2.6/en/installation/install-rancher-on-k8s/upgrades/.

Kubernetes

To upgrade Kubernetes you will use Rancher to orchestrate the upgrade. This is a matter of changing the Kubernetes version on the fleet-local/local Cluster in the provisioning.cattle.io/v1 apiVersion. For example

kubectl edit clusters.provisioning.cattle.io -n fleet-local local
apiVersion: provisioning.cattle.io/v1
kind: Cluster
metadata:
  name: local
  namespace: fleet-local
spec:
  # Change to new valid k8s version
  kubernetesVersion: v1.21.4+k3s1

Automated

You can also use the rancherd upgrade command on a server node to automatically do the above procedure.