Valve v1 lighthouses include a power management feature implemented over the Bluetooth LE protocol. The protocol and the message format used by this feature are briefly described (among others) here https://github.com/nairol/LighthouseRedox. How this feature works will follow.
NOTE: There is a similar Python script to control Valve v2 lighthouses here.
In the most usual setup, the lighthouses are used in a pair, where one LH is switched into "B" mode (becomes the master) and the other one into "C" mode (becomes the slave). In this configuration, "C" can only run when also "B" is running. The consequence is that powering off "B" will put "C" into stand-by, i.e. to turn off both LHs it only needs that "B" is turned off. Conversely, if "C" is in stand-by, turning "B" on will also wake up "C".
"B" can be turned off either by simply cutting the power (disconnecting from the power outlet). "B" cannot be directly turned off by a BT LE command, because the BT LE power management of the lighthouses is based on the notion of keeping the lighthouses on rather than on turning them on and off.
To keep "B" running, one needs to ping "B" regularly over BT LE. If those pings stop then "B" will turn off after the specified timeout has been reached. This setup ensures that "B" will turn off even if the controller (e.g. SteamVR running on the user's PC) crashes. This also explains why there is no command for turning the lighthouse off - it will not be reliable.
The ping itself, apart from keeping the lighthouse on, can also turn it on (from stand-by). So the only solution to turn the already running lighthouse off is to instruct it with relatively short timeout, and then let the timeout expire.
The ping uses the command described here. Following examples assume a linux machine with bluez package installed. hcitool, hciconfig, gatttool are parts of this package.
Offset | Type | Name | Description
-------|--------|------------------|------------
0x00 | uint8 | unknown | 0x12
0x01 | uint8 | cc | command: 0x00, 0x01, 0x02
0x02 | uint16 | tttt | timeout in sec. (big-endian)
0x04 | uint32 | YYXXVVUU | lighthouse ID or 0xffffffff (little-endian)
0x08 | uint8 | | 0x00
... | ... | | ...
0x13 | uint8 | | 0x00
Let's assume that aa:bb:cc:dd:ee:ff is "B" LH MAC address and UUVVXXYY is its binhex ID, which can be found either on the LH enclosure or read from OpenVR database, where the LH is identified as LHB-UUVVXXYY. Ping can be then executed as BT LE write command to the characteristic with the handle 0x0035 this way:
gatttool --device=aa:bb:cc:dd:ee:ff -I
[aa:bb:cc:dd:ee:ff][LE]> connect
[aa:bb:cc:dd:ee:ff][LE]> char-write-req 0x0035 12ccttttYYXXVVUU000000000000000000000000
Note that timeout tttt is encoded in big-endian, while lighthouse ID uses little-endian. The timeout specifies the time in seconds in which the lighthouse will go into stand-by if it does not receive another ping. For the detailed description of the communication protocol (commands) see PROTOCOL.md.
The implemented solution lhctrl.py uses Python bluepy package to access bluez BT LE API. The script runs the ping command explained above in the loop. First it wakes the LH "B" up, with the specified timeout, and then keeps pinging it, until it is either killed, or the global timeout expires.
usage: lhctrl.py [-h] -b LH_B_ID [-c LH_C_ID] [--lh_b_mac LH_B_MAC]
[--lh_c_mac LH_C_MAC] [--lh_timeout LH_TIMEOUT] [--hndl HNDL]
[-g GLOBAL_TIMEOUT] [-i INTERFACE] [-p PING_SLEEP]
[--try_count TRY_COUNT] [--try_pause TRY_PAUSE] [--cmd2 CMD2]
[-v]
Wakes up and runs Vive lighthouse(s) using BT LE power management
optional arguments:
-h, --help show this help message and exit
-b LH_B_ID, --lh_b_id LH_B_ID
BinHex ID of the "B" lighthouse (as in
LHB-<8_char_id>)
-c LH_C_ID, --lh_c_id LH_C_ID
Hex ID of the "C" lighthouse (as in LHB-<8char_id>)
--lh_b_mac LH_B_MAC BT MAC of the "B" lighthouse (in format
aa:bb:cc:dd:ee:ff)
--lh_c_mac LH_C_MAC BT MAC of the "C" lighthouse (in format
aa:bb:cc:dd:ee:ff)
--lh_timeout LH_TIMEOUT
time (sec) in which LH powers off if not pinged [60]
--hndl HNDL characteristic handle [53]
-g GLOBAL_TIMEOUT, --global_timeout GLOBAL_TIMEOUT
time (sec) how long to keep the lighthouse(s) alive
(0=forever) [0]
-i INTERFACE, --interface INTERFACE
The Bluetooth interface on which to make the
connection to be set. On Linux, 0 means /dev/hci0, 1
means /dev/hci1 and so on.
-p PING_SLEEP, --ping_sleep PING_SLEEP
time (sec) between two consecutive pings [20.0]
--try_count TRY_COUNT
number of tries to set up a connection [5]
--try_pause TRY_PAUSE
sleep time when reconnecting [2]
--cmd2 CMD2 second byte in the data written to the LH [2]
-v, --verbose increase verbosity of the log to stdout
