Git clone URL: git://github.com/dokai/gitctl.git
Project page: http://github.com/dokai/gitctl
- Added a new --from-file option which tells to read the names of components from a given file. The command then applies to the given components only. [rnd]
- Added "gitctl path" command which prints path(s) to directories for given component name(s). [rnd]
- Added "gitctl sh" command which performs specified shell commands (given with -c option) in each component's directory. E.g. gitctl sh -c 'git status' will execute "git status" for each component. [rnd]
- Refactored the "gitctl pending" command to support only the comparison between the pinned down revisions in the externals configuration and the HEADs of the production branches. In practice this means the the former --production switch is the default behavior and the --production, --staging and --dev options have been removed. The refactored "gitctl status" replaces the former functionality. [dokai]
- Refactored the "gitctl status" command to give more elaborate information about the status of the repository. [dokai]
- Refactored the pretty printer to include a space between the component name and the dotted justification. This will make it easier to use the output of gitctl in other scripts. [dokai]
- Added a new --verbose global option. Providing the --verbose option will give the same output as 2.0a5. Without the option the gitctl will only report changed components which will reduce the output significantly and make it easier to see what changed.
- Print normal program output to stdout and only errors to stderr. [dokai]
- When updating a hard-pinned revision perform a "git reset --hard" to enforce the revision. This fixes some issue where the working directory was in an inconsistent state and the checkout failed. [dokai]
- Refactored the
generate_externals
function to guarantee the order of sections in the generated configuration file. [dokai]
- Changed 'gitctl update' to attempt a fast-forward merge on all configured branches. If fast-forward is not possible a message will be shown and the branch left unchanged. [dokai]
- Fixed 'gitctl pending --production' which compared the wrong trees. When using pinned down revisions (HEADless working directories) we need to always compare against the remote branches. [dokai]
- Fixed a bug in 'gitctl pending' if not all branches were available. [dokai]
- Added the '-v' switch to show the version of the gitctl. [dokai]
- Added support for specifying the initial commit message by using 'gitctl create --message'. [dokai]
- Fixed 'gitctl create' to not leave the upstream repository's HEAD in broken state. [dokai]
- Added support for specifying which projects to operate on in addition to performing an operation on all the projects in the externals configuration. [dokai]
- Added a --no-fetch option to 'gitctl pending' to avoid fetching. [dokai]
- 'gitctl update' now shows which projects were updated and which were not when using pinned down revisions [dokai]
- Fixed a critical bug with 'gitctl update' when using pinned down revisions. [dokai]
- Complete overhaul to implement (a particular) Git workflow process in addition to custom externals handling. This breaks backward compatibility with the 1.x version but provides somewhat equivalent functionality. [dokai]
- Initial public release [dokai]
The purpose of this package is to implement a particular workflow for using Git to manage a project that consists of multiple independent subprojects. The original motivation is a zc.buildout driven system, but the implementation is not dependent on this. This is not a 100% generic tool, but the workflow is fairly common so it may be adaptable for other use cases also.
The workflow consists of using three pre-defined branches to model the development
, staging
and production
phases of code. We assume the use of a canonical central repository that developers use to sync their official changes. This repository is considered to be the canonical source and provides the "official" state of the projects. Developers are free to use any number of branches, tags and repositories as part of their daily work.
The code normally flows from development
to staging
to production
and the package provides tools to facilitate this process. Each individual Git repository is managed using any of the tools that Git provides.
In addition, the package provides a light-weight "externals" mechanism for easily pulling in and managing the subprojects. This differs from the functionality provided by git-submodule
in that both pinned-down and open dependencies can be defined. This resembles the way externals are handled in Subversion. Also, the individual Git repositories are not aware of the externals and the externals configuration is kept in a single location.
The package uses two different configuration files. The gitctl.cfg
file provides the higher level configuration and allows you to specify things like the canonical repository and the names of your development
, staging
and production
branches. The gitexternals.cfg
defines your project specific configuration of required sub-components.
upstream
The name used to refer to the canonical repository server, e.g. "origin".
upstream-url
The address of the canonical repository server. This address needs to point to the server in a manner that supports pushing. Currently only SSH is tested. Example: git@my.gitserver.com
branches
List of newline separated branches that will be tracked in the local repository. When the repositories are clone for each branch listed here a local tracking branch will be automatically created.
development-branch
Name of the development branch. The above
branches
listing will be made to implicitly contain this branch.
staging-branch
Name of the staging branch. The above
branches
listing will be made to implicitly contain this branch.
production-branch
Name of the production branch. The above
branches
listing will be made to implicitly contain this branch.
commit-email
Email address where commit emails will be sent. Only used when creating new repositories.
commit-email-prefix
The commit email prefix. Only used when creating new repositories.
An example configuration follows:
[gitctl]
upstream = origin
upstream-url = git@myserver.com
branches =
development
staging
production
development-branch = development
staging-branch = staging
production-branch = production
commit-email = commit@myserver.com
commit-email-prefix = [GIT]
The externals configuration consists of one or more sections that have the following properties. Each section name will be used to name the directory where the external will be cloned into.
url
(mandatory)
Full URL to the remote repository, e.g git@myserver.com:my.project.git
type
(optional)
The type of the remote repository. Currently only
git
is supported.
treeish
(optional)
The name of a "treeish" object that is checked out by default when first cloning the remote repository. The treeish object may refer, for example, to a branch or a tag. Defaults to
master
.
container
(optional)
The name of the directory where the project will be checked out into. An additional directory will be created under this one where the project files will be located so it is safe to use the same value for multiple projects. Relative paths are considered relative to the location of the config file.
An example configuration follows:
[my.project]
url = git@myserver.com:my.project.git
type = git
treeish = v1.0-dev
container = src
This results in the my.project.git repository to be cloned into ./src/my.project and the v1.0-dev to be checked out into the working directory.
The gitctl
script provides subcommands to implement the workflow. Each subcommand provides additional options. See gitctl [subcommand] --help
for details:
usage: gitctl [-h] [-v] [--config CONFIG] [--externals EXTERNALS] [--verbose]
{status,create,update,sh,branch,path,fetch,pending} ...
Git workflow utility for managing projects containing multiple git
repositories.
positional arguments:
{status,create,update,sh,branch,path,fetch,pending}
Commands
create Initializes a new local repository and creates a
matching upstream repository.
update Updates the configured repositories by either
attempting a fast-forward merge on existing project
branches or cloning new projects.
path Shows the path to the project directory.
sh Executes shell command for specified projects.
status Shows the status of each external project and alerts
if any are out of sync with the upstream repository.
branch Provides information and operates on the branches of
the projects.
pending Checks if there are any pending changes in the
production branches compared to the pinned down
versions in externals configuration.
fetch Updates the remote branches on all projects without
merging.
optional arguments:
-h, --help show this help message and exit
-v, --version show program's version number and exit
--config CONFIG Location of the configuration file. If omitted the
following locations will be search: $PWD/gitctl.cfg,
~/.gitctl.cfg.
--externals EXTERNALS
Location of the externals configuration file. Defaults
to $PWD/gitexternals.cfg
--verbose Prints more verbose output about repositories.
Using setuptools:
$ easy_install gitctl
Outputs the path(s) of the project directories:
$ cd /Users/rnd/buildout/
$ gitctl path -f refactoring_these_projects
/Users/rnd/buildout/products/Project1
/Users/rnd/buildout/products/Project2
/Users/rnd/buildout/src/Project3
where the refactoring_these_projects
file contains project names, one per line:
ProjectI
ProjectII
ProjectIII
These project names map to the sections in the gitexternals.cfg
configuration.
Without providing project names, all project paths will be output.
Executes shell command in each project directory (that is, the directory with path gitctl path
shows). Some examples (using the same file refactoring_these_projects
as above).
Show branches for each project (PROJECT
environment variable holds the name of the project):
gitctl sh -f refactoring_these_projects -c 'echo $PROJECT; git branch'
Making feature branch:
gitctl sh -f refactoring_these_projects -c 'git checkout -b my_f_branch'
Mass-check out certain feature branch (first, all projects to development, then checkout feature branch only for projects under refacture):
gitctl sh -c 'git checkout development'
gitctl sh -f refactoring_these_projects -c 'git checkout my_f_branch'
Get a list of projects which have production different from development (N.B. checked via commit, not diff, so, some listed project may really be textually identical):
gitctl sh -f refactoring_these_projects -c '[ `git rev-parse development` != `git rev-parse origin/production` ] && echo $PROJECT' 2> /dev/null
Make some operations on selected projects:
gitctl sh -f refactoring_these_projects -c 'git commit -m "Added newfeature"'
- Kai Lautaportti, Author [dokai]
- Roman Susi, [rnd]