Skip to content

samtools/htscodecs

Repository files navigation

Htscodecs

See the NEWS file for a list of updates and version details.

Build Status

This repository implements the custom CRAM codecs used for "EXTERNAL" block types. These consist of two variants of the rANS codec (8-bit and 16-bit renormalisation, with run-length encoding and bit-packing also supported in the latter), a dynamic arithmetic coder, and custom codecs for name/ID compression and quality score compression derived from fqzcomp.

They come with small command line test tools to act as both compression exploration programs and as part of the test harness.

Building

If building from git, you'll need to recreate the configure script using autoconf. "autoreconf -i" should work if you have the appropriate tools.

From then on, it follows the normal "./configure; make" or "mkdir build; cd build; ../configure; make" rule.

The library can be used as a git sub-module or as a completely separate entity. If you are attempting to make use of these codecs within your own library, such as we do within Staden io_lib, it may be useful to configure this with `--disable-shared --with-pic'.

Intel GDS/Downfall

The new Intel microcode to patch the Gather Data Sampling (GDS) bug has severely impacted the performance of the AVX2 and AVX512 gather SIMD intrinsics. So much so that simulating vector gather instructions using traditional scalar code is now more performant. Due to the slower AVX512 gathers on AMD Zen4, the simulated gather code is faster there too, even without having a Downfall mitigation.

Unfortunately this simulated code is slower than the original gather code when run on an unpatched CPUs. Without the GDS microcode patch on Intel CPUs, the simulated gathers slows the rate of decode by 10-30% and the rate of encode for AVX512 by up to 50%. The GDS microcode patch however can slow AVX2 decode and AVX512 encode by 2-3x.

Ideally we would auto-detect and select the optimal algorithm, but the easy solution is simply to pick the method with the most uniform performance without having bad worst-case rates.

Hence by default the simulated gather implementation is now the default. The old code can be reenabled by building with:

make CPPFLAGS=-DUSE_GATHER

Testing

There is a "make check" rule. If you're using a modern clang you can also cd to the tests directory and do "make fuzz" to build some fuzz testing targets, but you'll likely need to modify Makefile.am first as this has some hard-coded local paths.

We also provide test data and some command line tools to demonstrate usage of the compression codecs. These are in the tests directory also. Example usage:

./fqzcomp_qual -s 1 < dat/q40+dir > /tmp/q40.comp
./fqzcomp_qual  -d < /tmp/q40.comp > /tmp/q40.uncomp
awk '{print $1}' dat/q40+dir | md5sum;    # f91473032dd6942e72abec0868f17161
awk '{print $1}' /tmp/q40.uncomp | md5sum;# f91473032dd6942e72abec0868f17161

The fqzcomp test format is one quality values per line, with an optional additional parameter (0 or 1) to indicate READ1 or READ2 flag status.

There is a larger set of test data in the htscodecs-corpus repository (https://github.com/jkbonfield/htscodecs-corpus). If this is cloned into the tests subdirectory of htscodecs then the htscodecs "make check" will also use that larger data set for testing purposes.

API

Many functions just take an input buffer and size and return an output buffer, setting *out_size with the decoded size. NULL is returned for error. This buffer is malloced and is expected to be freed by the caller. These are the *compress and *uncompress functions.

A second variant sometimes exists where the output buffer is optionally allocated by the caller (it may be NULL in which case it has the same operation as above). If specified, *out_size must also be set to the allocated size of out. These are the compress_to and uncompress_to functions.

The compress size sometimes needs additional options. For the rANS and arithmetic coder this is the "order". Values of 0 and 1 are simple order-0 and order-1 entropy encoder, but this is a bit field and the more advanced codecs have additional options to pass in order (so it should really be renamed to flags). See below. Fqzcomp requires more input data - also see below. In all cases, sufficient information is stored in the compressed byte stream such that the decompression will work without needing these input paramaters.

Finally the various compress_bound functions give the size of buffer needed to be allocated when compressing a block of data.

Static rANS 4x8 (introduced in CRAM v3.0)

#include "htscodecs/rANS_static.h"

unsigned char *rans_compress(unsigned char *in, unsigned int in_size,
                             unsigned int *out_size, int order);
unsigned char *rans_uncompress(unsigned char *in, unsigned int in_size,
                               unsigned int *out_size);

This is the earlier rANS entropy encoder using 4 rANS states and 8-bit renormalisation, with Order-0 and Order-1 entropy models.

No (un)compress_to functions exist for this older codec.

Static rANS 4x16 and 32x16 with bit-pack/RLE (CRAM v3.1):

#include "htscodecs/rANS_static4x16.h"

#define RANS_ORDER_X32    0x04  // 32-way unrolling instead of 4-way
#define RANS_ORDER_STRIPE 0x08  // N streams for every Nth byte (N==order>>8)
#define RANS_ORDER_NOSZ   0x10  // Don't store the original size
#define RANS_ORDER_CAT    0x20  // Nop; for tiny data segments
#define RANS_ORDER_RLE    0x40  // Run length encoding
#define RANS_ORDER_PACK   0x80  // Pack 2,4,8 or infinite symbols into a byte.

unsigned int rans_compress_bound_4x16(unsigned int size, int order);
unsigned char *rans_compress_to_4x16(unsigned char *in,  unsigned int in_size,
                                     unsigned char *out, unsigned int *out_size,
                                     int order);
unsigned char *rans_compress_4x16(unsigned char *in, unsigned int in_size,
                                  unsigned int *out_size, int order);
unsigned char *rans_uncompress_to_4x16(unsigned char *in,  unsigned int in_size,
                                       unsigned char *out, unsigned int *out_size);
unsigned char *rans_uncompress_4x16(unsigned char *in, unsigned int in_size,
                                    unsigned int *out_size);

This is a faster version with 16-bit renormalisation and optional transforms (RLE, small alphabet bit-packing, and interleaving of N streams for e.g. 32-bit integer compression). Additionally the order field may include bit RANS_ORDER_X32 in which case a 32-way unrolled version will be used instead, with automatic CPU detection and dispatching to an appropriate SIMD implementation if available.

Adaptive arithmetic coding (CRAM v3.1):

#include "htscodecs/arith_dynamic.h"

unsigned char *arith_compress(unsigned char *in, unsigned int in_size,
                              unsigned int *out_size, int order);

unsigned char *arith_uncompress(unsigned char *in, unsigned int in_size,
                                unsigned int *out_size);

unsigned char *arith_compress_to(unsigned char *in,  unsigned int in_size,
                                 unsigned char *out, unsigned int *out_size,
                                 int order);

unsigned char *arith_uncompress_to(unsigned char *in, unsigned int in_size,
                                   unsigned char *out, unsigned int *out_sz);

unsigned int arith_compress_bound(unsigned int size, int order);

These reuse the same RANS_ORDER bit fields and abilities above with the exception of X32 as there is currently no unrolling of this code.

Name tokeniser (CRAM v3.1):

#include "htscodecs/tokenise_name3.h"

uint8_t *encode_names(char *blk, int len, int level, int use_arith,
                      int *out_len, int *last_start_p);

uint8_t *decode_names(uint8_t *in, uint32_t sz, uint32_t *out_len);

This differs to the general purpose entropy encoders as it takes a specific type of data. The names should be newline or nul separated for encode_names. decode_names will alway return nul terminated names, so you may need to swap these to newlines if you do round-trip tests.

The compression level controls how hard it tries to find the optimum compression method per internal token column. By default it'll use the rANS 4x16 codec, but with non-zero use_arith it'll use the adaptive arithmetic coder instead.

If non-NULL, last_start_p can be used to point to a partial name if an arbitrary block of names were supplied that don't end of a whole read name. (Is this useful? Probably not.)

FQZComp Qual (CRAM v3.1):

#include "htscodecs/fqzcomp_qual.h"

#define FQZ_FREVERSE 16
#define FQZ_FREAD2 128

typedef struct {
    int num_records;
    uint32_t *len;    // of size num_records
    uint32_t *flags;  // of size num_records
} fqz_slice;

char *fqz_compress(int vers, fqz_slice *s, char *in, size_t uncomp_size,
                   size_t *comp_size, int strat, fqz_gparams *gp);
char *fqz_decompress(char *in, size_t comp_size, size_t *uncomp_size,
                     int *lengths, int nlengths);

This is derived from the quality compression in fqzcomp. The input buffer is a concatenated block of quality strings, without any separator. In order to achieve maximum compression it needs to know where these separators are, so they must be passed in via the fqz_slice struct.

The summation of length fields should match the input uncomp_size field. Note the len fields may not actually be the length of the original sequences as some CRAM features may additional quality values (eg the "B" feature).

It can also be beneficial to supply per-record flags so fqzcomp can determine whether orientation (complement strand) helps and whether the READ1 vs READ2 quality distributions differ. These are just sub-fields from BAM FLAG.

The fqz_gparams will normally be passed in as NULL and the encoder will automatically select parameters. If you wish to fine tune the compression methods, see the fqz_params and fqz_gparams structures in the header file. You may also find the fqz_qual_stats() utility function helpful for gathering statistics on your quality values.

For decompression, the lengths array is optional and may be specified as NULL. If passed in, it must be of size nlengths and it will be filled out with the decoded length of each quality string. Note regardless of whether lengths is NULL or not, the buffer returned will be concatenated values so there is no way to tell where one record finishes and the next starts. (CRAM itself knows this via other means.)