senseBox MCU S2 x PlatformIO

This repository is an example project for the senseBox MCU S2 with PlatformIO. It just prints "Hello semseBox" on the display

Hardware

You need the following hardware to run this project:

• senseBox MCU S2
• senseBox Display
• Qwiic Cable
• USB-C Cable

Install PlatformIO

To install PlatformIO, follow the instructions on the PlatformIO website.

I personally recommend to create a new VSCode Profile for PlatformIO, so you can easily switch between PlatformIO and other VSCode extensions.

Clone this repository

Clone this repository to your local machine.

git clone git@github.com:sensebox/sensebox-mcu-s2-platformio.git

Open the project in VSCode

Open the project in VSCode.

code sensebox-mcu-s2-platformio

Build the project

Build the project by clicking the Build (✔) button in the lower toolbar, pressing Ctrl + Alt + B or by running the following command in the terminal.

pio run

Upload the project

Upload the project by clicking the Upload (→) button in the lower toolbar, pressing Ctrl + Alt + U or by running the following command in the terminal.

pio run --target upload