v2rayDocker = v2ray (vmess + ws + tls) / xray (VLESS + tcp + xtls & VLESS + ws + tls & trojan + tcp + tls) / trojan (trojan + tcp + tls) + caddy2 + qrcode
- 同时支持三种核心（默认 xray 作为 core_type）：
- v2ray（vmess + ws + tls）
- xray（VLESS + tcp + xtls & VLESS + ws + tls & trojan + tcp + tls，三种协议同时运行）
- trojan（trojan + tcp + tls），
- 自动生成 user_id、 ws_path （ws_path 亦是 trojan_password） 和 user_alertId （仅限 vmess），也支持自定义
- 与 v2ray 搭配时，默认使用 caddy2 自动生成证书
- 自动生成 安卓 v2rayNG vmess 链接和二维码
- 自动生成 iOS shadowrocket vmess 链接和二维码
- 已屏蔽非相关文件的访问
- 选择 xray 时使用共享内存高效进程转发（相比较与端口转发）
- dockerhub: c258c4fff5f9/v2ray_ws:v0.9.4
- v2ray: v4.40.1
- xray: v1.4.2
- trojan-go: v0.10.4
- Caddy: v2.4.3
- alpine: v3.14
- golang: v1.16.5
- 提前准备
1. 给域名，如 www.yourdomain.com，添加 A 记录，确保正确解析到 Docker 所在服务器的 IP 地址。具体设置方法可参看：https://help.aliyun.com/knowledge_detail/29725.html
"$HOME/.caddy/acme/acme-v02.api.letsencrypt.org/sites/ws_domain/ws_domain.crt""$HOME/.caddy/acme/acme-v02.api.letsencrypt.org/sites/ws_domain/ws_domain.key"Error: No such container: v2raydocker exec -i -t v2ray bash将证书复制到指定位置（路径中的 www.yourdomain.com 需替换成自己的域名）。注意：此操作是将 Docker 内的证书文件复制到和 Docker 所在服务器共享的文件夹中，以便留作后用。因此，启动 docker 前，需将 SELinux 设为 permissive 模式。
cp -r $HOME/.local/share/caddy/certificates/acme-v02.api.letsencrypt.org-directory/www.yourdomain.com /root/.caddy/acme/acme-v02.api.letsencrypt.org/sites - 安装 Docker
curl -fsSL https://get.docker.com -o get-docker.sh && bash get-docker.sh - 启动 Docker
sudo docker run -d --rm --name v2ray -p 443:443 -p 80:80 -v $HOME/.caddy:/root/.caddy c258c4fff5f9/v2ray_ws:v0.9.4 ws_domain(add/host) ws_name(ps) [user_id(id)] [ws_path/trojan_password(path)] [user_alertId(aid)] [core_type(bin)] && sleep 3s && sudo docker logs v2ray2. 务必将 ws_domain 替换成自己的域名，如 www.yourdomain.com。
3. 可留空（将会自动生成）或自行替换 user_id （如 0890b53a-e3d4-4726-bd2b-52574e8588c4）、 ws_path （如 3o38nn5h）和 user_alertId (如 0，仅限 vmess)。
sudo docker run -d --rm --name v2ray -p 443:443 -p 80:80 -v $HOME/.caddy:/root/.caddy c258c4fff5f9/v2ray_ws:v0.9.4 www.yourdomain.com V2RAY_WS 0890b53a-e3d4-4726-bd2b-52574e8588c4 3o38nn5h 0 v2ray && sleep 3s && sudo docker logs v2ray - 查看 Docker
sudo docker logs v2ray - 停止 Docker
sudo docker stop v2ray - 查看链接和二维码（注意：VLESS 并没有正式的链接和二维码标准，使用前仍需手动修改）
docker exec -i -t v2ray node link-qrcode.js
参考并感谢原作者 https://github.com/pengchujin/v2rayDocker
v2rayDocker = v2ray (vmess + ws + tls) / xray (VLESS + tcp + xtls & VLESS + ws + tls & trojan + tcp + tls) / trojan (trojan + tcp + tls) + caddy2 + qrcode
- Supporting 3 core types (take xray as core_type by default):
- v2ray (vmess + ws + tls)
- xray (VLESS + tcp + xtls & VLESS + ws + tls & trojan + tcp + tls, 3 protocols are running side by side)
- trojan (trojan + tcp + tls),
- Auto generate user_id, ws_path (take ws_path as trojan_password) and user_alertId (only for vmess)，which also can be customized
- Auto generate CA by caddy2 when working with v2ray
- Auto generate vmess link and QR code for v2rayNG on Android
- Auto generate vmess link and QR code for shadowrocket on iOS
- Block access from nonessential files
- Use Shared Memory high performance process forwarding (comparing to port forwarding) when working with xray
- dockerhub: c258c4fff5f9/v2ray_ws:v0.9.4
- v2ray: v4.40.1
- xray: v1.4.2
- trojan-go: v0.10.4
- Caddy: v2.4.3
- alpine: v3.14
- golang: v1.16.5
- Prerequisites
1. Create an A record for the domain, e.g. www.yourdomain.com, with the IP of docker server.
3. Make sure both files (replace ws_domain in the path with your domain), as follows, exist on docker server when choose xray (with trojan protocol) or trojan
"$HOME/.caddy/acme/acme-v02.api.letsencrypt.org/sites/ws_domain/ws_domain.crt""$HOME/.caddy/acme/acme-v02.api.letsencrypt.org/sites/ws_domain/ws_domain.key"Error: No such container: v2rayyou could get these 2 files from letsencrypt with running v2ray (vmess + ws + tls) once (or just copying from other locations).
docker exec -i -t v2ray bashCopy those 2 file to target locations (replace www.yourdomain.com in the path with your domain). Note：this procedure will copy certificates files from docker inside into a folder shared with docker server outside, so files can be kept and reused later. Must set SELinux to permissive model before start docker.
cp -r $HOME/.local/share/caddy/certificates/acme-v02.api.letsencrypt.org-directory/www.yourdomain.com /root/.caddy/acme/acme-v02.api.letsencrypt.org/sites - Install Docker
curl -fsSL https://get.docker.com -o get-docker.sh && bash get-docker.sh - Start Docker
sudo docker run -d --rm --name v2ray -p 443:443 -p 80:80 -v $HOME/.caddy:/root/.caddy c258c4fff5f9/v2ray_ws:v0.9.4 ws_domain(add/host) ws_name(ps) [user_id(id)] [ws_path/trojan_password(path)] [user_alertId(aid)] [core_type(bin)] && sleep 3s && sudo docker logs v2ray2. Must replace ws_domain with your domain, e.g. www.yourdomain.com.
3. Keep user_id (e.g. 0890b53a-e3d4-4726-bd2b-52574e8588c4), ws_path (e.g. 3o38nn5h) and user_alertId (e.g. 0, only for vmess) empty (which will be auto-generated) or replace them by your own.
4. The value of ws_path will used as trojan_password when choose xray (with trojan protocol) or trojan as core_type.
sudo docker run -d --rm --name v2ray -p 443:443 -p 80:80 -v $HOME/.caddy:/root/.caddy c258c4fff5f9/v2ray_ws:v0.9.4 www.yourdomain.com V2RAY_WS 0890b53a-e3d4-4726-bd2b-52574e8588c4 3o38nn5h 0 v2ray && sleep 3s && sudo docker logs v2ray - Check Docker
sudo docker logs v2ray - Stop Docker
sudo docker stop v2ray - Display links and QR codes (Attention: There is no official standards for VLESS link or QR code, you need modify it manually before use)
docker exec -i -t v2ray node link-qrcode.js
Thanks for the inspiration from https://github.com/pengchujin/v2rayDocker