Skip to content

SourceCred instance for the MakerDAO trial

License

Unknown and 2 other licenses found

Licenses found

Unknown
LICENSE
Apache-2.0
LICENSE-APACHE
MIT
LICENSE-MIT
Notifications You must be signed in to change notification settings

sourcecred/makerdao-cred

SourceCred Template Instance

This repository contains a template for running a SourceCred instance.

New users of SourceCred are encouraged to fork this repo to start their own instance.

This repo comes with a GitHub action configured that will run SourceCred automatically every 6 hours, as well as any time you change the configuration.

About SourceCred Instances

SourceCred is organized around "instances". Every instance must have a sourcecred.json file at root, which specifies which plugins are active in the instance. Config and permanent data (e.g. the Ledger) are stored in the master branch. All output or site data gets stored in the gh-pages branch by the Github Action.

Configuration files:

  • config/grain.json specifies how much Grain to distribute every week. The maxSimultaneousDistributions parameter determines how many weeks of "back-distributions" to generate if the command hasn't been run in a while (or ever).
  • config/currencyDetails.json By default, SourceCred uses "Grain" as the name for the currency it distributes to participants. If you would like to change it to something custom for your community, you can do so by editing this file.
  • config/plugins/$PLUGIN_OWNER/$PLUGIN_NAME stores plugin-specific data. Each plugin has its own directory. See the plugin section below to learn how to configure them.

Permanent Data:

  • data/ledger.json keeps a history of all grain distributions and transfers as well as identities added / merged.

Generated Data:

  • cache/ stores intermediate produced by the plugins. This directory should not be checked into Git at all.
  • output/ stores output data generated by SourceCred, including the Cred Graph and Cred Scores. This directory should be checked into Git; when needed, it may be removed and re-generated by SourceCred.
  • site/ which stores the compiled SourceCred frontend, which can display data stored in the instance.

Setup and Usage

Using this instance as a starting point, you can update the config to include the plugins you want, pointing at the data you care about. We recommend setting up your instance locally first and make sure its working before pushing your changes to master and using the Github Action.

  1. Hit the big green "Use this template" button on github. (do not fork)

  2. Use a git client to clone your new repo locally.

  3. Get Yarn, navigate to the cloned repo directory in a terminal, and then run yarn to install SourceCred and dependencies.

  4. Enable the plugins you want to use by updating the sourcecred.json file. e.g. to enable all the plugins:

{
  "bundledPlugins": ["sourcecred/discourse", "sourcecred/discord", "sourcecred/github"]
}
  1. If you are using the GitHub or Discord plugin, copy the .env.example file to a .env file:
cp .env.example .env
  1. Follow the steps in the plugin guides below to setup the config files and generate access tokens for each plugin and then paste them into the .env file after the = sign.

  2. Use the following commands to run your instance locally:

Load Data

  • yarn load loads the data from each plugin into the cache. Run this anytime you want to re-load the data from your plugins.

Run SourceCred

  • yarn start creates the cred graph, computes cred scores and runs the front end interface which you can access at localhost:6006 in your browser.

NOTE: this command will not load any new data from Discord / GitHub / Discourse, etc. If you want to re-load all the latest user activity, run yarn load again.

Clear Cache

  • yarn clean will clear any cached data that was loaded by the plugins. You can run this if any plugins fail to load. Run yarn load after this to re-load the data.

If you want to restart from a clean slate and remove all the generated graphs, you can do so via:

  • yarn clean-all

Run yarn clean-all if the yarn start command fails due to a change in the config or breaking changes in a new version of SourceCred.

Distributing Grain

  • yarn grain distributes Grain according to the current Cred scores, and the config in config/grain.json.

This repo also contains a GitHub action for automatically distributing grain. It will run every Sunday and create a Pull Request with the ledger updated with the new grain balances based on the users Cred scores. The amount of grain to get distributed every week can be defined in the config/grain.json file.

There are three different policies that can be used to control how the grain gets distributed: immediatePerWeek, balancedPerWeek, and recentPerWeek. For info on what each policy does, how to choose the right policy for your community, and how Grain operates in general, see How Grain Works.

Below is an example grain.json file for a configuration that uses a combination of all three policies. Here we tell SourceCred to distribute 1,000 grain every week, with 25% (250 grain) distributed according to immediatePerWeek, 25% (250 grain) distributed according to balancedPerWeek, and 50% (500 grain) distributed according to recentPerWeek.

{
 "immediatePerWeek": 250,
 "balancedPerWeek": 250,
 "recentPerWeek": 500,
 "recentWeeklyDecayRate": 0.5,
 "maxSimultaneousDistributions": 100
}

Low-level CLI

If you want to go deeper, you can access lower-level commands in the sourcecred CLI in the form of: yarn sourcecred <command>. For a list of what's available, and what each command does, run yarn sourcecred help.

Publishing on GitHub pages

Once you've got the instance configured to your satisfaction (see instructions on plugins below), commit and push your changes to master (or make a pull request). The Github Action will then generate the frontend and deploy it to GitHub Pages. To enable GitHub Pages for your instance, check out this guide. Make sure you select gh-pages as the branch to publish from.

Supported Plugins

GitHub

The GitHub plugin loads GitHub repositories.

You can specify the repositories to load in config/plugins/sourcecred/github/config.json.

In order for SourceCred to access your GitHub repos, you must have a GitHub API key in your .env file as SOURCECRED_GITHUB_TOKEN=<token> (copy the .env.example file for reference). The key should be read-only without any special scopes or permissions (unless you are loading a private GitHub repository, in which case the key needs access to your private repositories). You will also need to add it to your GitHub Action secrets.

You can generate a GitHub API key here.

Discourse

The Discourse plugin loads Discourse forums; currently, only one forum can be loaded in any single instance. This does not require any special API keys or permissions. You just need to set the server url in config/plugins/sourcecred/discourse/config.json.

Discord

The Discord plugin loads Discord servers, and mints Cred on Discord reactions. In order for SourceCred to access your Discord server, you need to generate a "bot token" and paste it in the .env file as SOURCECRED_DISCORD_TOKEN=<token> (copy the .env.example file for reference). You will also need to add it to your GitHub Action secrets.

The full instructions for setting up the Discord plugin can be found in the Discord plugin page in the SourceCred documentation.

Removing plugins

To deactivate a plugin, just remove it from the bundledPlugins array in the sourcecred.json file. You can also remove its config/plugins/OWNER/NAME directory for good measure.

About

SourceCred instance for the MakerDAO trial

Resources

License

Unknown and 2 other licenses found

Licenses found

Unknown
LICENSE
Apache-2.0
LICENSE-APACHE
MIT
LICENSE-MIT

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published