docs(i18n): new Crowdin updates (#5869)

* New translations readme.md (French)

* New translations readme.md (Spanish)

* New translations readme.md (Arabic)

* New translations readme.md (German)

* New translations readme.md (Italian)

* New translations readme.md (Japanese)

* New translations readme.md (Korean)

* New translations readme.md (Dutch)

* New translations readme.md (Norwegian)

* New translations readme.md (Polish)

* New translations readme.md (Portuguese)

* New translations readme.md (Russian)

* New translations readme.md (Turkish)

* New translations readme.md (Ukrainian)

* New translations readme.md (Chinese Simplified)

* New translations readme.md (Chinese Traditional)

* New translations readme.md (Vietnamese)

* New translations readme.md (Portuguese, Brazilian)

* New translations readme.md (Indonesian)

* New translations readme.md (Bengali)

* New translations readme.md (Sorani (Kurdish))

* New translations readme.md (French)

* New translations readme.md (Spanish)

* New translations readme.md (Arabic)

* New translations readme.md (German)

* New translations readme.md (Italian)

* New translations readme.md (Japanese)

* New translations readme.md (Korean)

* New translations readme.md (Dutch)

* New translations readme.md (Norwegian)

* New translations readme.md (Polish)

* New translations readme.md (Portuguese)

* New translations readme.md (Russian)

* New translations readme.md (Turkish)

* New translations readme.md (Ukrainian)

* New translations readme.md (Chinese Simplified)

* New translations readme.md (Chinese Traditional)

* New translations readme.md (Vietnamese)

* New translations readme.md (Portuguese, Brazilian)

* New translations readme.md (Indonesian)

* New translations readme.md (Bengali)

* New translations readme.md (Sorani (Kurdish))

docs/ar-SA/advanced-config/README.md

@@ -82,7 +82,7 @@ enable_transience
 
 ## TransientPrompt and TransientRightPrompt in Bash
 
-The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
+The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework at v0.4 or higher allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
 
 The \<value\> here is a colon-separated list of `always`, `same-dir` and `trim`. When `prompt_ps1_final` is empty and this option has a non-empty value, the prompt specified by `PS1` is erased on leaving the current command line. If the value contains a field `trim`, only the last line of multiline `PS1` is preserved and the other lines are erased. Otherwise, the command line will be redrawn as if `PS1=` is specified. When a field `same-dir` is contained in the value and the current working directory is different from the final directory of the previous command line, this option `prompt_ps1_transient` is ignored.
 
@@ -227,7 +227,7 @@ Note: The right prompt is a single line following the input location. To right a
 
 `right_format` is currently supported for the following shells: elvish, fish, zsh, xonsh, cmd, nushell, bash.
 
-Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework should be installed in order to use right prompt in bash.
+Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework v0.4 or higher should be installed in order to use right prompt in bash.
 
 ### مثال
 

docs/ar-SA/faq/README.md

@@ -72,7 +72,7 @@ You can enable the debug logs by using the `STARSHIP_LOG` env var. These logs ca
 env STARSHIP_LOG=trace starship module rust
 ```
 
-If starship is being slow you can try using the `timings` command to see if there is a particular module or command that to blame.
+If starship is being slow you can try using the `timings` command to see if there is a particular module or command that is to blame.
 
 ```sh
 env STARSHIP_LOG=trace starship timings

docs/bn-BD/advanced-config/README.md

@@ -82,7 +82,7 @@ enable_transience
 
 ## TransientPrompt and TransientRightPrompt in Bash
 
-The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
+The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework at v0.4 or higher allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
 
 The \<value\> here is a colon-separated list of `always`, `same-dir` and `trim`. When `prompt_ps1_final` is empty and this option has a non-empty value, the prompt specified by `PS1` is erased on leaving the current command line. If the value contains a field `trim`, only the last line of multiline `PS1` is preserved and the other lines are erased. Otherwise, the command line will be redrawn as if `PS1=` is specified. When a field `same-dir` is contained in the value and the current working directory is different from the final directory of the previous command line, this option `prompt_ps1_transient` is ignored.
 
@@ -227,7 +227,7 @@ Note: The right prompt is a single line following the input location. To right a
 
 `right_format` is currently supported for the following shells: elvish, fish, zsh, xonsh, cmd, nushell, bash.
 
-Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework should be installed in order to use right prompt in bash.
+Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework v0.4 or higher should be installed in order to use right prompt in bash.
 
 ### Example
 

docs/bn-BD/faq/README.md

@@ -72,7 +72,7 @@ You can enable the debug logs by using the `STARSHIP_LOG` env var. These logs ca
 env STARSHIP_LOG=trace starship module rust
 ```
 
-If starship is being slow you can try using the `timings` command to see if there is a particular module or command that to blame.
+If starship is being slow you can try using the `timings` command to see if there is a particular module or command that is to blame.
 
 ```sh
 env STARSHIP_LOG=trace starship timings

docs/ckb-IR/advanced-config/README.md

@@ -82,7 +82,7 @@ enable_transience
 
 ## TransientPrompt and TransientRightPrompt in Bash
 
-The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
+The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework at v0.4 or higher allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
 
 The \<value\> here is a colon-separated list of `always`, `same-dir` and `trim`. When `prompt_ps1_final` is empty and this option has a non-empty value, the prompt specified by `PS1` is erased on leaving the current command line. If the value contains a field `trim`, only the last line of multiline `PS1` is preserved and the other lines are erased. Otherwise, the command line will be redrawn as if `PS1=` is specified. When a field `same-dir` is contained in the value and the current working directory is different from the final directory of the previous command line, this option `prompt_ps1_transient` is ignored.
 
@@ -227,7 +227,7 @@ Note: The right prompt is a single line following the input location. To right a
 
 `right_format` is currently supported for the following shells: elvish, fish, zsh, xonsh, cmd, nushell, bash.
 
-Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework should be installed in order to use right prompt in bash.
+Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework v0.4 or higher should be installed in order to use right prompt in bash.
 
 ### نموونە
 

docs/ckb-IR/faq/README.md

@@ -72,7 +72,7 @@ You can enable the debug logs by using the `STARSHIP_LOG` env var. These logs ca
 env STARSHIP_LOG=trace starship module rust
 ```
 
-If starship is being slow you can try using the `timings` command to see if there is a particular module or command that to blame.
+If starship is being slow you can try using the `timings` command to see if there is a particular module or command that is to blame.
 
 ```sh
 env STARSHIP_LOG=trace starship timings

docs/de-DE/advanced-config/README.md

@@ -82,7 +82,7 @@ enable_transience
 
 ## TransientPrompt and TransientRightPrompt in Bash
 
-The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
+The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework at v0.4 or higher allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
 
 The \<value\> here is a colon-separated list of `always`, `same-dir` and `trim`. When `prompt_ps1_final` is empty and this option has a non-empty value, the prompt specified by `PS1` is erased on leaving the current command line. If the value contains a field `trim`, only the last line of multiline `PS1` is preserved and the other lines are erased. Otherwise, the command line will be redrawn as if `PS1=` is specified. When a field `same-dir` is contained in the value and the current working directory is different from the final directory of the previous command line, this option `prompt_ps1_transient` is ignored.
 
@@ -227,7 +227,7 @@ Note: The right prompt is a single line following the input location. To right a
 
 `right_format` is currently supported for the following shells: elvish, fish, zsh, xonsh, cmd, nushell, bash.
 
-Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework should be installed in order to use right prompt in bash.
+Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework v0.4 or higher should be installed in order to use right prompt in bash.
 
 ### Beispiel
 

docs/de-DE/faq/README.md

@@ -72,7 +72,7 @@ You can enable the debug logs by using the `STARSHIP_LOG` env var. These logs ca
 env STARSHIP_LOG=trace starship module rust
 ```
 
-If starship is being slow you can try using the `timings` command to see if there is a particular module or command that to blame.
+If starship is being slow you can try using the `timings` command to see if there is a particular module or command that is to blame.
 
 ```sh
 env STARSHIP_LOG=trace starship timings

docs/es-ES/advanced-config/README.md

@@ -82,7 +82,7 @@ enable_transience
 
 ## TransientPrompt and TransientRightPrompt in Bash
 
-The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework allows you to replace the previous-printed prompt with custom strings. Esto es útil en los casos en que la información del prompt no es siempre necesaria. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
+The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework at v0.4 or higher allows you to replace the previous-printed prompt with custom strings. Esto es útil en los casos en que la información del prompt no es siempre necesaria. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
 
 The \<value\> here is a colon-separated list of `always`, `same-dir` and `trim`. When `prompt_ps1_final` is empty and this option has a non-empty value, the prompt specified by `PS1` is erased on leaving the current command line. If the value contains a field `trim`, only the last line of multiline `PS1` is preserved and the other lines are erased. Otherwise, the command line will be redrawn as if `PS1=` is specified. When a field `same-dir` is contained in the value and the current working directory is different from the final directory of the previous command line, this option `prompt_ps1_transient` is ignored.
 
@@ -227,7 +227,7 @@ Nota: El prompt derecho es una sola línea siguiendo la ubicación de entrada. P
 
 `right_format` is currently supported for the following shells: elvish, fish, zsh, xonsh, cmd, nushell, bash.
 
-Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework should be installed in order to use right prompt in bash.
+Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework v0.4 or higher should be installed in order to use right prompt in bash.
 
 ### Ejemplo
 

docs/es-ES/faq/README.md

@@ -72,7 +72,7 @@ Puede habilitar los registros de depuración usando la variable de entorno `STAR
 env STARSHIP_LOG=trace starship module rust
 ```
 
-Si starship está siendo lento, puedes intentar usar el comando `timings` para ver si hay un módulo en particular o un comando a culpar.
+If starship is being slow you can try using the `timings` command to see if there is a particular module or command that is to blame.
 
 ```sh
 env STARSHIP_LOG=trace starship timings

docs/fr-FR/advanced-config/README.md

@@ -82,7 +82,7 @@ enable_transience
 
 ## TransientPrompt and TransientRightPrompt in Bash
 
-The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
+The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework at v0.4 or higher allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
 
 The \<value\> here is a colon-separated list of `always`, `same-dir` and `trim`. When `prompt_ps1_final` is empty and this option has a non-empty value, the prompt specified by `PS1` is erased on leaving the current command line. If the value contains a field `trim`, only the last line of multiline `PS1` is preserved and the other lines are erased. Otherwise, the command line will be redrawn as if `PS1=` is specified. When a field `same-dir` is contained in the value and the current working directory is different from the final directory of the previous command line, this option `prompt_ps1_transient` is ignored.
 
@@ -227,7 +227,7 @@ Note: l’invite à droite est une seule ligne, sur la même ligne que l’entr
 
 `right_format` is currently supported for the following shells: elvish, fish, zsh, xonsh, cmd, nushell, bash.
 
-Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework should be installed in order to use right prompt in bash.
+Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework v0.4 or higher should be installed in order to use right prompt in bash.
 
 ### Exemple
 

docs/fr-FR/faq/README.md

@@ -72,7 +72,7 @@ Vous pouvez activer les journaux de débogage en utilisant la variable d’envir
 env STARSHIP_LOG=trace starship module rust
 ```
 
-Si starship est lent, vous pouvez essayer d’utiliser la commande `timings` pour voir si un module ou une commande particulière est à blâmer.
+If starship is being slow you can try using the `timings` command to see if there is a particular module or command that is to blame.
 
 ```sh
 env STARSHIP_LOG=trace starship timings

docs/id-ID/advanced-config/README.md

@@ -82,7 +82,7 @@ enable_transience
 
 ## TransientPrompt and TransientRightPrompt in Bash
 
-The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
+The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework at v0.4 or higher allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
 
 The \<value\> here is a colon-separated list of `always`, `same-dir` and `trim`. When `prompt_ps1_final` is empty and this option has a non-empty value, the prompt specified by `PS1` is erased on leaving the current command line. If the value contains a field `trim`, only the last line of multiline `PS1` is preserved and the other lines are erased. Otherwise, the command line will be redrawn as if `PS1=` is specified. When a field `same-dir` is contained in the value and the current working directory is different from the final directory of the previous command line, this option `prompt_ps1_transient` is ignored.
 
@@ -227,7 +227,7 @@ Catatan: Right propmt merupakan sebuah baris yang mengikuti lokasi baris inputan
 
 `right_format` is currently supported for the following shells: elvish, fish, zsh, xonsh, cmd, nushell, bash.
 
-Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework should be installed in order to use right prompt in bash.
+Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework v0.4 or higher should be installed in order to use right prompt in bash.
 
 ### Contoh
 

docs/id-ID/faq/README.md

@@ -72,7 +72,7 @@ You can enable the debug logs by using the `STARSHIP_LOG` env var. These logs ca
 env STARSHIP_LOG=trace starship module rust
 ```
 
-If starship is being slow you can try using the `timings` command to see if there is a particular module or command that to blame.
+If starship is being slow you can try using the `timings` command to see if there is a particular module or command that is to blame.
 
 ```sh
 env STARSHIP_LOG=trace starship timings

docs/it-IT/advanced-config/README.md

@@ -82,7 +82,7 @@ enable_transience
 
 ## TransientPrompt and TransientRightPrompt in Bash
 
-The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
+The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework at v0.4 or higher allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
 
 The \<value\> here is a colon-separated list of `always`, `same-dir` and `trim`. When `prompt_ps1_final` is empty and this option has a non-empty value, the prompt specified by `PS1` is erased on leaving the current command line. If the value contains a field `trim`, only the last line of multiline `PS1` is preserved and the other lines are erased. Otherwise, the command line will be redrawn as if `PS1=` is specified. When a field `same-dir` is contained in the value and the current working directory is different from the final directory of the previous command line, this option `prompt_ps1_transient` is ignored.
 
@@ -227,7 +227,7 @@ Note: The right prompt is a single line following the input location. To right a
 
 `right_format` is currently supported for the following shells: elvish, fish, zsh, xonsh, cmd, nushell, bash.
 
-Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework should be installed in order to use right prompt in bash.
+Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework v0.4 or higher should be installed in order to use right prompt in bash.
 
 ### Esempio
 

docs/it-IT/faq/README.md

@@ -72,7 +72,7 @@ You can enable the debug logs by using the `STARSHIP_LOG` env var. These logs ca
 env STARSHIP_LOG=trace starship module rust
 ```
 
-If starship is being slow you can try using the `timings` command to see if there is a particular module or command that to blame.
+If starship is being slow you can try using the `timings` command to see if there is a particular module or command that is to blame.
 
 ```sh
 env STARSHIP_LOG=trace starship timings

docs/ja-JP/advanced-config/README.md

@@ -82,7 +82,7 @@ enable_transience
 
 ## TransientPrompt and TransientRightPrompt in Bash
 
-The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
+The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework at v0.4 or higher allows you to replace the previous-printed prompt with custom strings. This is useful in cases where all the prompt information is not always needed. To enable this, put this in `~/.bashrc` `bleopt prompt_ps1_transient=<value>`:
 
 The \<value\> here is a colon-separated list of `always`, `same-dir` and `trim`. When `prompt_ps1_final` is empty and this option has a non-empty value, the prompt specified by `PS1` is erased on leaving the current command line. If the value contains a field `trim`, only the last line of multiline `PS1` is preserved and the other lines are erased. Otherwise, the command line will be redrawn as if `PS1=` is specified. When a field `same-dir` is contained in the value and the current working directory is different from the final directory of the previous command line, this option `prompt_ps1_transient` is ignored.
 
@@ -227,7 +227,7 @@ Invoke-Expression (&starship init powershell)
 
 `right_format` is currently supported for the following shells: elvish, fish, zsh, xonsh, cmd, nushell, bash.
 
-Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework should be installed in order to use right prompt in bash.
+Note: The [Ble.sh](https://github.com/akinomyoga/ble.sh) framework v0.4 or higher should be installed in order to use right prompt in bash.
 
 ### 設定例