Skip to content

Python code to interact with the maplin robot arm.

Notifications You must be signed in to change notification settings

tazjel/robot_arm

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

8 Commits
 
 
 
 
 
 

Repository files navigation

Python Code to drive the Maplin/OWI USB Robot arm

Tested on:

  • Linux
  • OSX (Lion, Mountain Lion) May work on Windows,.

Requirements

  • Python 2.7
  • Libusb
  • pyusb

Usage

As a library:

>>> import arm

To initialise libusb and the arm

>>> arm = usb_arm.Arm()

This will tell you if all the dependencies work, and will throw an exception if it fails to find the arm and connect to it.

Now lets test it by turning on the LED

>>> arm.move(usb_arm.LedOn)

It will turn on for 1 second, and automatically turn off. The moveArm function automatically turns off after each move. You can optionally specify another time, but since the Maplin arm doesn't have any sensors, beware that if it reaches limits before the time finishes, then it won't stop.

Actual movement

>>> arm.move(usb_arm.ElbowUp)

The elbow will move up. The movements possible:

OpenGrips CloseGrips WristUp WristDown ElbowUp ElbowDown ShoulderUp ShoulderDown BaseClockWise BaseCtrClockWise

Stop

Combining Movements

Movements are based upon the BitPattern class, and you can feed arbitrary bitpatterns to it, but all those the arm is currently capable of are represented above.

However, you may want to make more than one movement at the same time. You can do this by combining patterns with the or operator:

>>> arm.move(usb_arm.ElbowDown | usb_arm.BaseClockWise, 0.5)

The arm should turn clockwise and bring the elbow up simultaneously for half a second.

Gear Lash

The unmodified arm has a few flaws - it has fairly loose gear chains in the "servos" it uses for the movements. To see what I mean try the following:

>>> arm.move(usb_arm.ShoulderUp, 0.5)
>>> arm.move(usb_arm.ShoulderDown, 0.5)

You will note the arm moves, but when it returns, it does not quite return to the same position - there is an error, which you will need to account for as you use the arm and in programmed sequences.

You should now know enough to move the arm to any location.

Sequences of Actions

You can create programmed sequences of actions for the robot. However, before you issue one of these, ensure you know the position of the arm, and wont move it past its limits - which could cause damage to it,

Sequences are created as arrays of commands. Each command is an array of the bitpattern, followed by the optional time (defaulting to 1 second):

>>> actions = [[usb_arm.ElbowDown, 0.5], [usb_arm.CloseGrips, 0.5], [usb_arm.ElbowUp]]

To issue the action list:

>>> arm.doActions(actions)

Note you can ctrl-c stop the movements. There are a couple of canned actions already in the module:

block_left
block_right
left_and_blink

Troubleshooting

Linux - permissions

You will either need to run as root (not recommended) or modify your system to allow all users access to the device.

sudo nano /etc/udev/rules.d/42-usb-arm-permissions.rules

and add:

SUBSYSTEM=="usb", ATTR{idVendor}=="1267", ATTR{idProduct}=="0000", MODE:="0666"

Plug in the device and you should be able to access it. Tested on Ubuntu and Mint Linux versions.

About

Python code to interact with the maplin robot arm.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published