Skip to content

thanks4opensource/regbits

Repository files navigation

regbits: C++ templates for type-safe bit manipulation

regbits is a C++ template library for type-safe manipulation of bits in microcontroller peripheral registers. Compiled executable object code equals or outperforms traditional techniques in terms of size and speed, and complexity of header files describing peripheral/register layout is comparable.

Contents

License

regbits: C++ templates for type-safe bit manipulation

Copyright (C) 2019 Mark R. Rubin

This file is part of regbits.

The regbits program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

The regbits program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with the regbits program. If not, see https://www.gnu.org/licenses/gpl.html

What does regbits do?

Regbits enables easy to use, optimally efficient low-level access to microcontroller registers.

Given appropriate header files, the following all compile to executable object code of equivalent size and speed (see Performance claims, below):

    // raw address and bits
    *(int*)(0x40008008) = 0xc0;

    // symbolic names for peripheral, register, and bits
    *(TIMER1 + TIMER_CTRL_OFFSET) = TIMER_ENABLE | TIMER_COUNT_UP;

    // C struct peripheral definition with symbolic bit names
    TIMER1->CTRL = TIMER_ENABLE | TIMER_COUNT_UP;

    // C++ regbits
    timer1->ctrl = TIMER_ENABLE | TIMER_COUNT_UP;

Things get more interesting when manipulating contiguous spans of several bits:

    // raw address and bits
    *(int*)(0x400c0004) = (*(int*)(0x400c0004) & ~0xf00) | 0x600;

    // symbolic names for peripheral, register, and bits
    *(TIMER3 + TIMER_CONFIG_OFFSET) = (*(TIMER3 + TIMER_CONFIG_OFFSET) & TIMER_CLOCK_DIV_MASK) | TIMER_CLOCK_DIV_8;

    // C struct peripheral definition with symbolic bit names and bit manipulation preprocessor macro
    INSERT_BITS(USART2->CONFIG, USART_BAUD_MASK, USART_BAUD_19200);

    // C++ regbits
    usart2->config /= USART_BAUD_19200;  // or usart2->config.ins(USART_BAUD_19200)

But more important than what regbits does is what it does NOT do. All of the following will compile without error but almost certainly cause serious, hard to debug problems when executed:

    // read the manual if you want to know what this is trying to do
    *(int*)(0x40100010) = 0x802;

    // they probably use the same bit positions for all peripherals
    *(SPI0 + SPI_CONFIG_OFFSET) = I2C_ENABLE | I2C_MASTER_MODE;

    // this might do something interesting
    ADC1->CTRL = USART_PARITY_EVEN | TIMER_ENABLE_INTERRUPT;
    
    // we'll catch any problems during debug and test
    init_usb_periph(USART3);

    // hope this works when used later on
    uint32_t timer_config_settings = SPI_LSB_FIRST | I2C_NACK_ENABLE;

Compared to regbits which won't allow any of the following to compile:

    // ERROR: can't set SPI peripheral with I2C configuration constants
    spi0->ctrl = I2C_ENABLE;

    // ERROR: can't set register with another register's constant
    i2c1->interrupts = I2C_MODE_FAST;

    // ERROR: can't call function with wrong kind of peripheral
    init_usb(USART3);
    
    // ERROR: can't mix different peripherals' constants
    uint32_t timer_config_settings = (TIMER_COUNT_DOWN | USART_BAUD_9600).bits();

These are contrived, exaggerated examples. However, the point remains that this kind of error is easy to make, hard to detect by source code inspection, and possibly even harder to find during runtime testing and debugging. A one-letter typo can easily hide in thousands of lines of code:

    I2C3->CTRL = I2C_TIMEOUT_ON | I2S_ENABLE | I2C_MASTER_MODE;

What is regbits for?

Microcontrollers (MCUs / "Systems On A Chip" / SOCs) typically include peripherals: Hardware functionality such as input/output ports, timers, serial communications, analog-to-digital and digital-to-analog conversion, etc.

These peripherals typically contain multiple registers: Sets of memory locations (usually contiguous) which when written to and read from control the peripheral and access its data. Additionally, the MCU itself -- clock speed, interrupts, I/O configuration -- is configured via similar sets of registers.

Single and spans of multiple (usually contiguous) bits within each register typically control or access specific capabilities of the peripheral or MCU. A register for a serial communications peripheral might be structured:

      31  30  29  28  27  26  25  24  23  22  21  20  19  18  17  16  15  14  13  12  11  10  9   8   7   6   5   4   3   2   1   0
    |   |   |   |   |   |   |   | P |   |   |       PORT        |   | TR| RR|  CLK  |   |   | TI| RI|   |   |   |   SPEED   | M | E |

    bit(s)  label   functionality   
      0       E     Enable peripheral
      1       M     Mode (0==transmit, 1==receive)
     2-4    SPEED   Speed (0==slowest, 7==fastest)
      8      RI     Enable receive interrupt
      9      TI     Enable transmit interrupt
    12-13    CLK    Clock source (0==peripherals, 1==main, 2==external)
     14      RR     Receive data available
     15      TR     Transmit ready
    17-21   PORT    I/O port
     24      P      Polarity (0=positive, 1=negative)

Although the examples in this README.md and the unittest code are for 32-bit architectures, all are equally applicable to 64-bit and other word widths. And although designed for register access, regbits and similar methods are not limited to such usage.

Hardware/software limitations

All or almost all contemporary MCU hardware permits accessing memory by words (32/64/etc bits), bytes (8 bits), shorts (typically 16 bits) and other fixed, multiples-of-8, bit widths (32 bits on 64-bit architecture, etc).

Software frequently needs to access register bits (single or multiple) as separate, isolated atomic units, changing only those bits without affecting others in the same register. Hardware does not support this, and with the exception of C bitfields (see below), neither do the C and C++ languages. Regbits and other software techniques (see below) address these limitations.

Register memory accesses

Although registers are accessed as memory locations, they may or may not behave as such. C and C++ declarations should always include the volatile keyword because register bits may change independent of the CPU activity and the C/C++ execution model. There can be further differences; see Future enhancements, below.

How is regbits used?

Given a microcontroller definition file based on the regbits C++ class templates (see below), the set of operators and functions defined in regbits.hxx can be used in client code.

The examples below are based on the sample definition file included in this repository's unit test directory, mcu_regbits.hxx (see Unit test, below). This file contains a small set of example peripheral and register definitions describing a fictitious MCU and some of its peripherals.

The examples show correct regbits usage. The type-safe design of regbits will intentionally produce compilation failures in case of mismatches between regbits objects, as per above. Also see "Type-safe error detection" in the unittest documentation, below.

Many of the examples (and the unit test suite) show regbits' operator and function/method syntaxes, both of which produce the same results and can be used interchangeably.

Single bits vs bit spans

Regbits defines two C++ classes for manipulating regisers: Bits and Mskd.

Bits are used for setting/clearing/testing/etc single bits. The Bits (from regbits.hxx used in the following examples are:

    Serial::Config::POLARITY   // bit: 1<<6
    Serial::Config::ENDIAN     // bit: 1<<5
    Serial::Config::MODE       // bit: 1<<0

Mskd objects represent a (usually) contiguous bit span and contain a bit mask:

    Serial::Config::DATALEN_16_BITS         // bits:  1<<1   mask: 0x03<<1
    Timer::Prescale::PRESCALER_HIGH<17>()   // bits: 17<<25  mask: 0x1f<<25

The bit mask allows setting/testing/etc bit spans to the exact "bits" pattern, both setting and clearing bits within the mask, as necessary.

Single Bits and Mskd bit spans can largely be used interchangeably, with a few exceptions. Bits and Mskd objects can be combined with the | operator in either order, but the type of the result is different:

    Serial::Config::DATALEN_16_BITS | Serial::Config::MODE   // Mskd|Bits returns Mskd
    Serial::Config::MODE | Serial::Config::DATALEN_16_BITS   // Bits|Mskd returns Bits, losing mask information

The Mskd type's mask information is important for operations such as /=, ins(), all(), >, >=, <, and <=, described below. Bits objects will be automatically be converted to Mskd as required, but with a trivial mask equal to the bits themselves; thus losing a Mskd's mask via the | operator may produce unexpected results. In practice these issues are largely intuitive and obvious. Note, however, that when masking information is not needed, Bits are more efficient than Mskd spans.

Set register to single bit, bit span, or numeric value

    // set register to single bit
    serial2->config =   Serial::Config::POLARITY ;
    serial2->config.wrt(Serial::Config::POLARITY);

    // set register to multiple single bits
    serial2->config =   Serial::Config::ENDIAN | Serial::Config::POLARITY ;
    serial2->config.wrt(Serial::Config::ENDIAN | Serial::Config::POLARITY);

    // set register to bit span
    serial2->config =   Serial::Config::DATALEN_16_BITS ;  // datalen 8, 16, or 32 encoded in 2 bits
    serial2->config.wrt(Serial::Config::DATALEN_16_BITS);

    // set register to multiple bit spans
    serial2->config =   Serial::Config::DATALEN_16_BITS | Serial::Config::PARITY_EVEN ;  // parity EVEN, ODD, CRC encoded in 2 bits
    serial2->config.wrt(Serial::Config::DATALEN_16_BITS | Serial::Config::PARITY_EVEN);

    // set register to mix of single and bit span
    serial2->config =   Serial::Config::DATALEN_16_BITS | Serial::Config::MODE ;  // mode is single bit
    serial2->config.wrt(Serial::Config::DATALEN_16_BITS | Serial::Config::MODE);
    // order unimportant
    serial2->config =   Serial::Config::MODE | Serial::Config::DATALEN_16_BITS ;
    serial2->config.wrt(Serial::Config::MODE | Serial::Config::DATALEN_16_BITS);

    // set register to numeric value
    serial2->config =   0x12345678 ;
    serial2->config.wrt(0x12345678);

Set, clear, flip bits

    // set single/multiple bits/spans and mixtures thereof
    serial2->config |=  Serial::Config::POLARITY;
    serial2->config.set(Serial::Config::POLARITY        | Serial::Config::ENDIAN     );
    serial2->config |=  Serial::Config::DATALEN_16_BITS | Serial::Config::PARITY_EVEN ;
    serial2->config.set(Serial::Config::POLARITY        | Serial::Config::ENDIAN     );


    // clr single/multiple bits/spans and mixtures thereof
    serial2->config -=  Serial::Config::POLARITY;
    serial2->config.clr(Serial::Config::POLARITY        | Serial::Config::ENDIAN     );
    serial2->config -=  Serial::Config::DATALEN_16_BITS | Serial::Config::PARITY_EVEN ;
    serial2->config.clr(Serial::Config::POLARITY        | Serial::Config::ENDIAN     );


    // flip single/multiple bits/spans and mixtures thereof
    serial2->config ^=  Serial::Config::POLARITY;
    serial2->config.flp(Serial::Config::POLARITY        | Serial::Config::ENDIAN     );
    serial2->config ^=  Serial::Config::DATALEN_16_BITS | Serial::Config::PARITY_EVEN ;
    serial2->config.flp(Serial::Config::POLARITY        | Serial::Config::ENDIAN     );

Insert bits (set without changing others)

(see Insert operator syntax, below)

    // insert span of bits into register
    serial2->config /=  Serial::Config::DATALEN_16_BITS ;
    serial2->config.ins(Serial::Config::DATALEN_16_BITS);

    // insert multiple spans of bits into register
    serial2->config /=  Serial::Config::DATALEN_16_BITS | Serial::Config::PARITY_EVEN ;
    serial2->config.ins(Serial::Config::DATALEN_16_BITS | Serial::Config::PARITY_EVEN);

    // insert mix of single and contiguous span of bits
    // note order is important: span|bits yields span, but
    // bits|span yields bits, losing mask information for span
    serial2->config /=  Serial::Config::DATALEN_16_BITS | Serial::Config::MODE ;
    serial2->config.ins(Serial::Config::DATALEN_16_BITS | Serial::Config::MODE);

    // insert single or multiple single bits into register
    // produces expected results, but identical and less efficient than using |=
    serial2->config /=  Serial::Config::ENDIAN ;
    serial2->config.ins(Serial::Config::ENDIAN);
    serial2->config /=  Serial::Config::ENDIAN | Serial::Config::POLARITY ;
    serial2->config.ins(Serial::Config::ENDIAN | Serial::Config::POLARITY);

Test register bits

Updated: Previous versions of regbits used operator syntax ( == and !=) combined with the explicit .bits() method. Although workable and supporting all capabilities, this syntax was felt to be ambigous and was replaced with the following named methods.

    // Test if any of the specified single bits are set
    if (serial2->config.any(Serial::Config::ENDIAN)) // ...
    if (serial2->config.any(Serial::Config::ENDIAN | Serial::Config::POLARITY))  // ...

    // Test if all of the specified single bits are set
    // Can be used with one single bit but identical results and less efficient than .any()
    if (serial2->config.all(Serial::Config::ENDIAN | Serial::Config::POLARITY))  // ...

    // Test one or more spans of bits (both zero and one bits within span(s))
    if (serial2->config.all(Serial::Config::DATALEN_16_BITS)) // ...
    if (serial2->config.all(Serial::Config::DATALEN_16_BITS | Serial::Config::PARITY_EVEN)) // ...
    // Note .any() cannot be implemented efficiently for spans of bits,
    // nor at all if spans are contiguous

    // Test all register bits exactly equal to specified single/multiple
    // bits and/or spans, including bits outside specified bits/spans
    if (serial2->config.is(Serial::Config::ENDIAN)) // ...
    if (serial2->config.any(Serial::Config::ENDIAN | Serial::Config::POLARITY))  // ...
    if (serial2->config.is(Serial::Config::DATALEN_16_BITS)) // ...
    if (serial2->config.is(Serial::Config::DATALEN_16_BITS | Serial::Config::PARITY_EVEN)) // ...
    if (serial2->config.is(Serial::Config::ENDIAN | Serial::Config::DATALEN_16_BITS)) // ...
    if (serial2->config.is(Serial::Config::DATALEN_16_BITS | Serial::Config::ENDIAN)) // ...

    // Test exactly equal to zero or arbitrary value
    if (serial2->config.is(0)) // ...
    if (serial2->config.is(0x12345678)) // ...

    // Compare numeric values of bit spans
    // Note that if used with multiple bit spans, MSBs take precedence
    if (serial2->config >  Serial::Config::DATALEN_16_BITS) // ...
    if (serial2->config >= Serial::Config::DATALEN_16_BITS) // ...
    if (serial2->config <  Serial::Config::DATALEN_16_BITS) // ...
    if (serial2->config <= Serial::Config::DATALEN_16_BITS) // ...

Extract single and multiple bit spans from a register

    // extract all bits from register
    Serial::Config::bits_t  config_bits = serial2->config;

    // extract all bits from register into bit span (maintaining bit span masking information)
    Serial::Config::mskd_t  config_mskd = Serial::Config::DATALEN_16_BITS;  // or any other DATALEN_XX_BITS constant
                            config_mskd = serial2->config                ;

Atomic (single) read of hardware register

See discussion below about self-modifying registers.

    // hardware register might change between accesses
    if (serial2->config.any(Serial::Config::ENDIAN) || serial2->config >= Serial::Config::DATALEN_16_BITS) // ...

    // single atomic read
    Serial::config_t  config(serial2->config);
    if (config.any(Serial::Config::ENDIAN) || config >= Serial::Config::DATALEN_16_BITS) // ...

Working with multiple bit spans containing arbitrary values

(see rationale for syntax below)

    timer1->prescale = Timer::Prescale::PRESCALER_HIGH<17>();
    if (timer1->prescale.all(Timer::Prescale::PRESCALER_HIGH<17>())) // ...

Shifted values

Regbits canonically works with multiple bit spans in their hardware-defined position within the register, avoiding unnecessary shift operations. (See C bitfields, below.) Cases exist, however, where shifting is required:

      31  30  29  28  27  26  25  24  23  22  21  20  19  18  17  16  15  14  13  12  11  10  9   8   7   6   5   4   3   2   1   0
    |   |   |   |   |   |   |   |   |   |   |             DATA              |   |   |   |   |   |   |   |   |   |  |   |   |STATUS |
            
    Usart::rxdata_t  rxdata(usart3->rxdata);
    if (rxdata.any(Usart::Rxdata::STATUS_DATA_RCVD))
        return copy >> Usart::Rxdata::DATA_SHIFTED;  // 0..255
        // or copy.shifted(Usart::Rxdata::DATA_SHIFTED);

How is regbits implemented?

The C++ class templates defining regbits are contained in the file regbits.hxx. This file is intended for inclusion in an MCU peripheral/register/bits definition file such as the mcu_regbits.hxx example in the unittest subdirectory (see Unit test, below).

Following are some commented excerpts from mcu_regbits.hxx illustrating use of the templates:

Include the regbits.hxx templates:

    #include <regbits.hxx>

Typically, MCU regbits definitions should go in their own namespace -- a manufacturer or chip name such as stm32f767xx or lpc824 would replace the example's generic "mcu" namespace name:

    namespace mcu {

Start definition of a peripheral:

    struct Serial {

Start definition of a register in the peripheral.:

        struct Config {

MCU regbits definitions implement type-safety by instantiating several classes templated on each specific register. Other instantiated template classes' methods will only accept objects template-instantiated on the same register.

pos_t is a type-safe wrapper for unsigned integers. It ensures that the values can only be used with the classes/register they are intended for

            using  pos_t = Pos<uint32_t, Config>;

Define bit positions of individual bits and spans of bits within the register ...

Note that these, and all other definitions, are static constexpr. Combined with the regbits constexpr constructors in the regbits.hxx class templates (and when compiled with appropriate optimization flags) they become compile-time only constants -- no runtime storage is allocated for them.

Note also that these values are externally visible in case client code has use for them.

Bit positions:

            static constexpr pos_t  MODE_POS     = pos_t( 0),
                                    DATALEN_POS  = pos_t( 1),
                                    PARITY_POS   = pos_t( 3),
                                    ENDIAN_POS   = pos_t( 5),
                                    POLARITY_POS = pos_t( 6),
                                    RXPORT_POS   = pos_t( 7),
                                    TXPORT_POS   = pos_t(12);

Define bitmasks describing the size of multi-bit spans:

            static const uint32_t   DATALEN_MASK = 0x03,
                                    PARITY_MASK  = 0x03,
                                    RXPORT_MASK  = 0x1f,
                                    TXPORT_MASK  = 0x1f;

Instantiation of the regbits templated classes. Bits is used for single bits (although when object instances are combined with others via the "|" operator they can contain multiple single bits). Mskd is used for spans of multiple bits. Shft is used to normalize (right shift to LSB) masked values.

            using bits_t = Bits<uint32_t, Config>;
            using mskd_t = Mskd<uint32_t, Config>;
            using shft_t = Shft<uint32_t, Config>;

The fact that Mskd objects hold both a bitmask and an bit value allows it to be used as a standalone object that supports bit span insertion into a register. Expressions using regbits insertion operators/methods objects such as:

    serial2->config /= Serial::Config::DATALEN_16_BITS

compile to executable object code identical that generated when not using regbits:

    serial2_register = (serial2_register & ~datalen_mask) | datalen_bits;

Continuing with the example definition file, define constants for single bits:

    static constexpr bits_t MODE     = bits_t(1, MODE_POS    ),
                            ENDIAN   = bits_t(1, ENDIAN_POS  ),
                            POLARITY = bits_t(1, POLARITY_POS);

Defining constants for multiple bit spans:

    static constexpr mskd_t
            DATALEN_8_BITS  = mskd_t(DATALEN_MASK, 0, DATALEN_POS),
            DATALEN_16_BITS = mskd_t(DATALEN_MASK, 1, DATALEN_POS),
            DATALEN_32_BITS = mskd_t(DATALEN_MASK, 2, DATALEN_POS),
            PARITY_ODD      = mskd_t(PARITY_MASK,  0, PARITY_POS ),
            PARITY_EVEN     = mskd_t(PARITY_MASK,  1, PARITY_POS ),
            PARITY_CRC      = mskd_t(PARITY_MASK,  2, PARITY_POS );

Defining multiple bit spans with arbitrary values, limit checking, and bit shifting (see Shifted values, above, and Templates for numerically-defined constants, below).

    REGBITS_MSKD_RANGE("Serial::Config",
                       RXPORT,
                       rxport,
                       RXPORT_MASK,
                       RXPORT_POS,
                       MAX_PORT_NUM);

End the register definition, define a type name for possible external use, and allocate storage for the register. This where the peripheral struct gets a finite size (and layout) to match the actual hardware peripheral when a pointer to its address is declared.

        };    // struct Config
        using config_t = Reg<uint32_t, Config>;
        config_t    config;

More register definitions:

        struct Interrupts {
        // ...

End peripheral definition and check that size is correct:

    };    // struct Serial
    static_assert(sizeof(Serial) == 24, "sizeof(Serial)");

Define pointers to actual hardware peripherals:

    static const uint32_t   PERIPH_BASE     = 0x40000000;

    static const uint32_t   SERIAL_BASE     = PERIPH_BASE + 0x00a00000;

    static const uint32_t   SERIAL0_BASE    = SERIAL_BASE + 0x00000000,
                            SERIAL1_BASE    = SERIAL_BASE + 0x00001000,
                            SERIAL1_BASE    = SERIAL_BASE + 0x00002000;

    static Serial* const    serial0 = reinterpret_cast<Serial*>(SERIAL0_BASE);
    static Serial* const    serial1 = reinterpret_cast<Serial*>(SERIAL1_BASE);
    static Serial* const    serial2 = reinterpret_cast<Serial*>(SERIAL2_BASE);

Comparison with other approaches

(This material is included as background for the design of regbits. Experienced microcontroller programmers will be very familiar with the approaches and should skip ahead to the Requirements, limitations, problems section, below.)

Two different sets of information need to be provided to client code:

  1. Registers order/layout within peripherals
  2. Bits within the registers

Some current approaches for addressing both of these requirements are described (somewhat intermixed) in the following sections.

Raw numeric register addresses and bits

source (.c) file:

    *(int*)(0x400080a2) = 0xc0;

This is sadomasochism: Sadism inflicted on anyone else who has to work with the code, and masochism on the part of the original developer who needs to maintain or debug it in the future.

pros:
  • no definition file needed
cons:
  • completely opaque; inherently undocumented
  • requires constant reference to external manuals
  • error prone, typos almost impossible to detect

Preprocessor symbolic peripheral addresses and register offsets

source (.c) file:
    *(TIMER1 + TIMER_CTRL_OFFSET) = //...
definition (.h) file:
    #define TIMER_BASE              ((PERIPH_BASE) + 0x00200000)

    #define TIMER0_BASE             ((TIMER_BASE)  + 0x00000000)
    #define TIMER1_BASE             ((TIMER_BASE)  + 0x00001000)
    #define TIMER2_BASE             ((TIMER_BASE)  + 0x00002000)

    #define TIMER0                  ((volatile uint32_t*)(TIMER0_BASE))
    #define TIMER1                  ((volatile uint32_t*)(TIMER1_BASE))
    #define TIMER2                  ((volatile uint32_t*)(TIMER2_BASE))

    #define TIMER_CONTROL_OFFSET    0
    #define TIMER_PRESCALE_OFFSET   1
    #define TIMER_AUTORELOAD_OFFSET 2
pros:
  • more readable / self-documenting
cons:
  • verbose and error-prone
  • not type-safe, no error detection

Preprocessor symbolic bit definitions

source (.c) file:
    // set_bits
    /*...*/ = TIMER_CONTROL_ENABLE | TIMER_CONTROL_CLOCK_SOURCE_PLL;

    // clear bits
    /*...*/ &= ~(TIMER_CONTROL_ENABLE | TIMER_CONTROL_DIRECTION);

    // insert field
    /*...*/ = (/*...*/ & ~TIMER_CONTROL_CLOCK_SOURCE_MSK) | TIMER_CONTROL_CLOCK_SOURCE_PLL;
definition (.h) file:
    #define TIMER_CONTROL_ENABLE_POS          4
    #define TIMER_CONTROL_SINGLE_CYCLE_POS    5
    #define TIMER_CONTROL_ARR_ENABLE_POS      6
    #define TIMER_CONTROL_CLOCK_SOURCE_POS    7
    #define TIMER_CONTROL_DIRECTION_POS       10

    #define TIMER_CONTROL_ENABLE_MSK          (1 << TIMER_CONTROL_ENABLE_POS)
    #define TIMER_CONTROL_SINGLE_CYCLE_MSK    (1<< TIMER_CONTROL_SINGLE_CYCLE_POS)
    #define TIMER_CONTROL_SINGLE_CYCLE        TIMER_CONTROL_SINGLE_CYCLE_MSK
    #define TIMER_CONTROL_ARR_ENABLE_MSK      (1 << TIMER_CONTROL_ARR_ENABLE_POS)
    #define TIMER_CONTROL_ARR_ENABLE          TIMER_CONTROL_ARR_ENABLE_MSK
    #define TIMER_CONTROL_ENABLE              TIMER_CONTROL_ENABLE_MSK
    #define TIMER_CONTROL_CLOCK_SOURCE_MSK    (0x7 << TIMER_CONTROL_CLOCK_SOURCE_POS)
    #define TIMER_CONTROL_CLOCK_SOURCE_MAIN   (0x0 << TIMER_CONTROL_CLOCK_SOURCE_POS)
    #define TIMER_CONTROL_CLOCK_SOURCE_PLL    (0x1 << TIMER_CONTROL_CLOCK_SOURCE_POS)
    #define TIMER_CONTROL_CLOCK_SOURCE_EXTERN (0x2 << TIMER_CONTROL_CLOCK_SOURCE_POS)
    #define TIMER_CONTROL_DIRECTION_MSK       (1 << TIMER_CONTROL_DIRECTION_POS)
    #define TIMER_CONTROL_DIRECTION           TIMER_CONTROL_DIRECTION_MSK

    #define TIMER_MAX_PRESCALER_VAL           0xff
    #define TIMER_PRESCALE_PRESCALER_POS      24
    #define TIMER_PRESCALE_PRESCALER_MSK      (0xff << TIMER_PRESCALE_PRESCALER_POS)

    #define TIMER_MAX_AUTORELOAD_VAL          0x00ffffff
    #define TIMER_AUTORELOAD_AUTORELOAD_POS   0
    #define TIMER_AUTORELOAD_AUTORELOAD_MSK   (0xffffff << TIMER_AUTORELOAD_AUTORELOAD_POS)
pros:
  • self-documenting
cons:
  • global scope
  • verbose (due to need to prefix/disambiguate many similar names)
  • not type-safe
  • no error checking
  • not visible in debuggers (exception: gcc "-g3" flag)

Static consts

source (.c) file:

(same as Preprocessor symbolic peripheral addresses and register offsets and Preprocessor symbolic bit definitions, above.)

definition (.h) file:
    static const uint8_t    TIMER_CONTROL_ENABLE_POS       =  4,
                            TIMER_CONTROL_SINGLE_CYCLE_POS =  5,
                            TIMER_CONTROL_ARR_ENABLE_POS   =  6,
                            TIMER_CONTROL_CLOCK_SOURCE_POS =  7,
                            TIMER_CONTROL_DIRECTION_POS    = 10;

    static const uint32_t   TIMER_CONTROL_ENABLE_MSK          = (1 << TIMER_CONTROL_ENABLE_POS)              ,
                            TIMER_CONTROL_SINGLE_CYCLE_MSK    = (1<< TIMER_CONTROL_SINGLE_CYCLE_POS)         ,
                            TIMER_CONTROL_SINGLE_CYCLE        = TIMER_CONTROL_SINGLE_CYCLE_MSK               ,
                            TIMER_CONTROL_ARR_ENABLE_MSK      = (1 << TIMER_CONTROL_ARR_ENABLE_POS)          ,
                            TIMER_CONTROL_ARR_ENABLE          = TIMER_CONTROL_ARR_ENABLE_MSK                 ,
                            TIMER_CONTROL_ENABLE              = TIMER_CONTROL_ENABLE_MSK                     ,
                            TIMER_CONTROL_CLOCK_SOURCE_MSK    = (0x7 << TIMER_CONTROL_CLOCK_SOURCE_POS)      ,
                            TIMER_CONTROL_CLOCK_SOURCE_MAIN   = (0x0 << TIMER_CONTROL_CLOCK_SOURCE_POS)      ,
                            TIMER_CONTROL_CLOCK_SOURCE_PLL    = (0x1 << TIMER_CONTROL_CLOCK_SOURCE_POS)      ,
                            TIMER_CONTROL_CLOCK_SOURCE_EXTERN = (0x2 << TIMER_CONTROL_CLOCK_SOURCE_POS)      ,
                            TIMER_CONTROL_DIRECTION_MSK       = (1 << TIMER_CONTROL_DIRECTION_POS)           ,
                            TIMER_CONTROL_DIRECTION           = TIMER_CONTROL_DIRECTION_MSK                  ,
                                                              = TIMER_MAX_PRESCALER_VAL= 0xff                ,
                            TIMER_PRESCALE_PRESCALER_POS      = 24                                           ,
                            TIMER_PRESCALE_PRESCALER_MSK      = (0xff << TIMER_PRESCALE_PRESCALER_POS)       ,
                                                              =                                              ,
                            TIMER_MAX_AUTORELOAD_VAL          = 0x00ffffff                                   ,
                            TIMER_AUTORELOAD_AUTORELOAD_POS   = 0                                            ,
                            TIMER_AUTORELOAD_AUTORELOAD_MSK   = (0xffffff << TIMER_AUTORELOAD_AUTORELOAD_POS);

and if used for raw numeric register addresses and bits ([above[(raw_numeric_values)):

    static const uint32_t   TIMER_BASE  = PERIPH_BASE + 0x00c00000;

    static const uint32_t   TIMER0_BASE = TIMER_BASE  + 0x00000000,
                            TIMER1_BASE = TIMER_BASE  + 0x00001000,
                            TIMER2_BASE = TIMER_BASE  + 0x00002000;

    static volatile uint32_t* const   TIMER0 = (volatile uint32_t*)TIMER0_BASE;
    static volatile uint32_t* const   TIMER1 = (volatile uint32_t*)TIMER1_BASE;
    static volatile uint32_t* const   TIMER2 = (volatile uint32_t*)TIMER2_BASE;

    static const uint32_t   TIMER_CONTROL_OFFSET    = 0,
                            TIMER_PRESCALE_OFFSET   = 1,
                            TIMER_AUTORELOAD_OFFSET = 2;
pros:
  • self-documenting
  • type-safe
  • can be namespace-scoped (C++, short, non-prefixed names)
cons:
  • (in C) global scope, verbose (due to need to prefix/disambiguate many similar names)
  • no error checking
  • memory space for variables (potentially thousands) in executable binary if appropriate compiler flags not used

C/C++ enums

source (.c) file:

(same as Preprocessor symbolic peripheral addresses, register offsets and Preprocessor symbolic bit definitions, and Static consts above.)

definition (.h) file (C code):
    enum TIMER_CONTROL_POS {
        TIMER_CONTROL_ENABLE_POS       =   4,
        TIMER_CONTROL_SINGLE_CYCLE_POS =   5,
        TIMER_CONTROL_ARR_ENABLE_POS   =   6,
        TIMER_CONTROL_CLOCK_SOURCE_POS =   7,
        TIMER_CONTROL_DIRECTION_POS    =  10,
    };

    enum TIMER_CONTROL_BITS {
        TIMER_CONTROL_ENABLE_MSK          = (1 << TIMER_CONTROL_ENABLE_POS),
        TIMER_CONTROL_SINGLE_CYCLE_MSK    = (1<< TIMER_CONTROL_SINGLE_CYCLE_POS),
        TIMER_CONTROL_SINGLE_CYCLE        = TIMER_CONTROL_SINGLE_CYCLE_MSK,
        TIMER_CONTROL_ARR_ENABLE_MSK      = (1 << TIMER_CONTROL_ARR_ENABLE_POS),
        TIMER_CONTROL_ARR_ENABLE          = TIMER_CONTROL_ARR_ENABLE_MSK,
        TIMER_CONTROL_ENABLE              = TIMER_CONTROL_ENABLE_MSK,
        TIMER_CONTROL_CLOCK_SOURCE_MSK    = (0x7 << TIMER_CONTROL_CLOCK_SOURCE_POS),
        TIMER_CONTROL_CLOCK_SOURCE_MAIN   = (0x0 << TIMER_CONTROL_CLOCK_SOURCE_POS),
        TIMER_CONTROL_CLOCK_SOURCE_PLL    = (0x1 << TIMER_CONTROL_CLOCK_SOURCE_POS),
        TIMER_CONTROL_CLOCK_SOURCE_EXTERN = (0x2 << TIMER_CONTROL_CLOCK_SOURCE_POS),
        TIMER_CONTROL_DIRECTION_MSK       = (1 << TIMER_CONTROL_DIRECTION_POS),
        TIMER_CONTROL_DIRECTION           = TIMER_CONTROL_DIRECTION_MSK,
    };

    enum TIMER_PRESCALE_BITS {
        TIMER_MAX_PRESCALER_VAL      = 0xff,
        TIMER_PRESCALE_PRESCALER_POS = 16,
        TIMER_PRESCALE_PRESCALER_MSK = 0xff << TIMER_PRESCALE_PRESCALER_POS,
    };

    enum TIMER_AUTORELOAD_BTIS {
        TIMER_MAX_AUTORELOAD_VAL        = 0x00ffffff,
        TIMER_AUTORELOAD_AUTORELOAD     = 0,
        TIMER_AUTORELOAD_AUTORELOAD_MSK = 0xffffff<< << TIMER_AUTORELOAD_AUTORELOAD_POS,
    };
definition (.h) file (C++ code):
    enum class TIMER_CONTROL {
        ENABLE       =  4,
        SINGLE_CYCLE =  5,
        ARR_ENABLE   =  6,
        CLOCK_SOURCE =  7,
        DIRECTION    = 10,
    };

    enum class TIMER_CONTROL_BITS {
        ENABLE_MSK          = (1 << static_cast<uint32_t>(TIMER_CONTROL::ENABLE)),
        ENABLE              = ENABLE_MSK,
        SINGLE_CYCLE_MSK    = (1<< static_cast<uint32_t>(TIMER_CONTROL::SINGLE_CYCLE)),
        SINGLE_CYCLE        = SINGLE_CYCLE_MSK,
        ARR_ENABLE_MSK      = (1 << static_cast<uint32_t>(TIMER_CONTROL::ARR_ENABLE)),
        ARR_ENABLE          = ARR_ENABLE_MSK,
        CLOCK_SOURCE_MSK    = (0x7 << static_cast<uint32_t>(TIMER_CONTROL::CLOCK_SOURCE)),
        CLOCK_SOURCE_MAIN   = (0x0 << static_cast<uint32_t>(TIMER_CONTROL::CLOCK_SOURCE)),
        CLOCK_SOURCE_PLL    = (0x1 << static_cast<uint32_t>(TIMER_CONTROL::CLOCK_SOURCE)),
        CLOCK_SOURCE_EXTERN = (0x2 << static_cast<uint32_t>(TIMER_CONTROL::CLOCK_SOURCE)),
        DIRECTION_MSK       = (1 << static_cast<uint32_t>(TIMER_CONTROL::DIRECTION)),
        DIRECTION            = DIRECTION_MSK,
    };


    enum class TIMER_PRESCALE_BITS {
        MAX_PRESCALER_VAL  = 0xff,
        PRESCALER_POS      = 16,
        PRESCALER_MSK      = (0xff << static_cast<uint32_t>(PRESCALER_POS),
    };

    enum class TIMER_AUTORELOAD_BTIS {
        AUTORELOAD_VAL  =  0x00ffffff,
        AUTORELOAD_POS  =  0,
        AUTORELOAD_MSK  = (0xffffff  << static_cast<uint32_t>(AUTORELOAD_POS),
    };
pros:
  • self-documenting
  • short class-scoped names (C++)
  • type-safe (C++) (but not really due to need to cast before use)
cons:
  • requires casting before use (C++)
  • requires C++11 or higher (C++)
  • global scope, verbose (due to need to prefix/disambiguate many similar names) (C)
  • not type-safe (C)
  • no error checking (C)

C structs

(The most commonly used technique.)

source (.c) file:
    // set value
    TIMER1->CTRL = value;

    // set bits without affecting others
    GPIO1->SET |= value;

    // clear bits without affecting others
    SYS->INTERRUPTS &= ~value;

    // insert bits without affecting others
    USART1->SPEED = (USART1->SPEED & mask) | value;

(values via numeric values, #defines, static consts, enums, etc)

definition (.h) file:
    typedef struct serial {
            volatile uint32_t       CONTROL  ;
            volatile uint32_t       CONFIG   ;
            volatile uint32_t       INTERRUPT;
            volatile uint32_t       STATUS   ;
            volatile uint32_t       RXBUFFER ;
            volatile uint32_t       TXBUFFER ;
    } serial_t;

    #ifdef USE_PREPROCESSOR_ADDRESSES
    #define SERIAL_BASE     ((PERIPH_BASE) + 0x00a00000)

    #define SERIAL0_BASE    ((SERIAL_BASE) + 0x00000000)
    #define SERIAL1_BASE    ((SERIAL_BASE) + 0x00001000)
    #define SERIAL2_BASE    ((SERIAL_BASE) + 0x00002000)

    #define SERIAL0         ((serial_t*)(SERIAL0_BASE))
    #define SERIAL1         ((serial_t*)(SERIAL1_BASE))
    #define SERIAL2         ((serial_t*)(SERIAL2_BASE))
    #endif

    #ifdef USE_STATIC_CONST_ADDRESSES
    static const uint32_t   SERIAL_BASE     = PERIPH_BASE + 0x00a00000;

    static const uint32_t   SERIAL0_BASE    = SERIAL_BASE + 0x00000000,
                            SERIAL1_BASE    = SERIAL_BASE + 0x00001000,
                            SERIAL1_BASE    = SERIAL_BASE + 0x00002000;

    
    static serial_t* const  SERIAL0         = (serial_t*)SERIAL0_BASE;
    static serial_t* const  SERIAL1         = (serial_t*)SERIAL1_BASE;
    static serial_t* const  SERIAL2         = (serial_t*)SERIAL2_BASE;
    #endif

    // constants via #defines, static consts, enums, etc)
    // ...
pros:
  • self-documenting
  • type-safe peripheral and register definitions
cons:
  • bit values not type-safe
  • struct name frequently omitted (superceded by typedef) thus not allowing forward declaration

C bitfields

C bitfields would seem to solve all requirements for independent/atomic/isolated register bit access:

source (.c) file:
    // set single bit
    SERIAL2->config.polarity = 1;
    
    // clear single bit
    SERIAL2->config.polarity = 0;

    // set span of bits
    SERIAL2->config.datalen = SERIAL_CONFIG_DATALEN_8_BITS;

    // clear span of bits
    SERIAL2->config.datalen = 0;
definition (.h) file:
    typedef struct serial {
        volatile struct {
            unsigned    enable :  1,
                        recv   :  1,
                        xmit   :  1,
                               : 29;
            };
        } control;

        volatile struct {
            unsigned    mode     :  1,
                        datalen  :  2,
                        parity   :  2,
                        endian   :  1,
                        polarity :  1,
                        rxport   :  5,
                        txport   :  5,
                                 : 15;
        } config;
    } serial_t;

    // (addresses of peripheral instances as per [C structs](#c_structs_definition_file), above)

    // (values for multi-bit fields via numeric values, #defines, static consts, enums, etc)

Unfortunately, there are several problems with this feature of C/C++. First, testing bitfield values generates more executable/object code than other approaches by necessitating large amounts of bit masking and shifting:

    // other approaches
    SERIAL2->parity = ODD_PARITY;
    if (SERIAL2->parity == ODD_PARITY) // ...

    //  bitfield
    register = 0;
    SERIAL2->config.parity = ODD_PARITY;
    if (SERIAL2->config.parity == ODD_PARITY) // ...

    // equivalent code to that generated by bitfield approach
    SERIAL2->config = ODD_PARITY << PARITY_POSITION;
    if (((SERIAL2->config & 0x18) >> 3) == ODD_PARITY) // ...

(In the other approaches ODD_PARITY has been pre-shifted to its correct bit position.)

But a much worse inefficiency, both in source code verbosity and more importantly executable/object code size and speed, occurs when multiple individual bit fields need to be set/cleared/modified:

    // other approaches
    SERIAL2->parity = ODD_PARITY | BIG_ENDIAN;

    // bitfields
    SERIAL2->config.parity = ODD_PARITY;
    SERIAL2->config.endian = 1;

    // equivalent bitfield code -- two writes to register instead of one
    SERIAL2->config = (SERIAL2->config & ~PARITY_MASK) | (ODD_PARITY << PARITY_POSITION);
    SERIAL2->config = (SERIAL2->config & ~ENDIAN_MASK) | (1          << ENDIAN_POSITION);

Some of this inefficiency can be avoided by creating a union between the C bitfields and a variable of the architecture's native word size:

    union CONFIG_T {
        volatile uint32_t    word;
        volatile struct {
            unsigned    mode     :  1,
                        datalen  :  2,
                        parity   :  2,
                        endian   :  1,
                        polarity :  1,
                        rxport   :  5,
                        txport   :  5,
                                 : 15;
        };
    } config;

In this way at least the entire register can be cleared in one operation. But setting or clearing multiple fields at once requires including #define or static const definitions as per the other approaches. This effectively doubles the size and complexity of the definition file and the effort to create it, and introduces the risk of mismatched definitions, etc.

Finally, there does exist the possibility that a very "smart" compiler could detect the multiple settings and coalesce them into a single or at least smaller set of operations.

pros:
  • self-documenting
  • type-safe, intuitive access to register bits/fields
cons:
  • inefficient
  • may require duplicate, possibly mismatched definitions
  • multi-bit values not type-safe

Helper functions

Helper functions can simplify usage of many of the above approaches, particularly for inserting single bits and multiple fields (not needed for C bitfields).

Functions may be implemented as parameterized preprocessor macros:

    #define GET_BITS(REG, MASK) ((REG) & (MASK))

    #define SET_BITS(REG, BITS) ((REG) |= (BITS))

    #define CLR_BITS(REG, BITS) ((REG) &= ~(BITS))

    #define FLIP_BITS(REG, BITS) (REG) ^= (BITS)

    #define INSERT_BITS(REG, MASK, BITS) ((REG) = ((REG & ~(MASK)) | (BITS)))

or as C inline functions:

    inline uint32_t GET_BITS(
    volatile uint32_t   &reg,
    const    uint32_t    mask)
    {
        return reg & mask;
    };

    inline void SET_BITS(
    volatile uint32_t   &reg,
    const    uint32_t    bits)
    {
        reg |= bits;
    };


    inline void CLR_BITS(
    volatile uint32_t   &reg,
    const    uint32_t    bits)
    {
        reg &= ~bits;
    };

    inline void FLP_BITS(
    volatile uint32_t    &reg,
    const    uint32_t     bits)
    {
        reg |= bits;
    };

    inline void INS_BITS(
    volatile uint32_t   &reg,
    const    uint32_t    mask,
    const    uint32_t    bits)
    {
        reg = (reg & ~mask) | bits;
    };

or as C++ inline function templates:

    template <typename UINT_T> inline UINT_T GET_BITS(
    volatile UINT_T   &reg,
    const    UINT_T    mask)
    {
        return reg & mask;
    };

    template <typename UINT_T> inline void SET_BITS(
    volatile UINT_T   &reg,
    const    UINT_T    bits)
    {
        reg |= bits;
    };


    template <typename UINT_T> inline void CLR_BITS(
    volatile UINT_T   &reg,
    const    UINT_T    bits)
    {
        reg &= ~bits;
    };

    template <typename UINT_T> inline void FLP_BITS(
    volatile UINT_T    &reg,
    const    UINT_T     bits)
    {
        reg |= bits;
    };

    template <typename UINT_T> inline void INS_BITS(
    volatile UINT_T   &reg,
    const    UINT_T    mask,
    const    UINT_T    bits)
    {
        reg = (reg & ~mask) | bits;
    };
pros:
  • reduces source code verbosity
  • simplifies accesses
  • reduces liklihood of errors
  • C++ version type-safe
cons:
  • C version not type-safe

Higher-level wrappers

Regbits and the existing approaches described above are intended for low-level, "bare metal" ("bare silicon"?) programming. There also exist higher-level libraries which attempt to make programming microcontrollers easier, simpler, and more generic and portable,

Some examples include:

It is this author's opinion that such libraries rarely achieve their goals. They introduce entirely new/large/complex APIs on top of the native MCU's and do not remove the need to fully understand the underlying hardware. They are also inefficient, introducing additional levels of function calls and frequently a requirement to allocate (statically, on the stack, or in dynamic memory) large data structures to be passed to the library's functions. They often do not support much if any compile time type-safety, instead replacing it with runtime checks which subsequently requires solving the difficult problem of how to handle fatal coding errors in (possibly safety-critical) embedded applications.

Regbits requirements, limitations, problems

Compiler optimization

Regbits requires a C++11 or later compiler. It should run correctly at any optimization level; however gcc optimization -O1 or higher is needed as otherwise storage is allocated for the peripheral/register constant objects. (There are likely individual optimization flags which would allow -O0 without the excess allocations.)

Parameter passing

Regbits is specifically designed for passing its (usually constant) objects to functions by value, not by reference. The objects are either one (regbits::Bits) or two (regbits::Mskd) processor native words in size, and at least on ARM architectures they should be passed in registers. If optimization is not enabled, gcc passes them on the stack.

Note that with at least with:

    (GNU Tools for Arm Embedded Processors 8-2018-q4-major) 8.2.1 20181213 (release) [gcc-8-branch revision 267074]

-mabi=apcs-gnu or -mabi=atpcs must be specified in order to force passing regbits objects in registers. Code will compile and run without these flags, however it will not be as small/fast/efficient as possible (and possibly less efficient in that case than other approaches, such as C structs).

Forcing use of constants

Further, gcc/g++ will sometimes require a static constexpr regbits object to be instantiated in memory instead of being treated as a compile-time-only constant. This requires a (small amount) of unnecessary storage, and unless defined manually causes an undefined variable error at runtime.

To work around the problem, regbits implements a unary operator+() for its objects. Client code should use this as needed, typically only when passing objects as parameters to functions:

    // do this:
    func(+Serial::Config::DATALEN_16_BITS);

    // ... instead of this:
    func(Serial::Config::DATALEN_16_BITS);

There is no runtime cost for using the operator; in fact the opposite (it forces the object to be passed in registers instead of the stack). Suggestions for a better solution are hereby solicited.

Insert operator syntax

Choice of syntax for regbits's insert operator is difficult and debatable.

To match what the operator actually does, the following ("invert mask, AND with register, then OR in bits.) would be intuitive:

    serial2->config ~&|= Serial::Config::DATALEN_16_BITS

This is of course impossible in C/C++. Perhaps better (but even further removed from permissible C/C++ syntax) would be:

    serial2->config @= Serial::Config::DATALEN_16_BITS

An earlier release of regbits used:

    serial2->config <<= Serial::Config::DATALEN_16_BITS

which somewhat matched the C++ Standard Libary's ostream<< operator. That particular syntax is unworkable due to C/C++ operator precedence rules which work perfectly for ostreams:

    // plain
    std::cout << a << b << c << std::endl;

    // equivalent explicitly parenthesized
    ((((std::cout << a) << b) << c) << std::endl);

but very poorly for regbits' insert:

    // parentheses required:
    serial2->config << (Serial::Config::DATALEN_16_BITS | Serial);

because without parentheses:

    serial2->config << Serial::Config::DATALEN_16_BITS | Serial;

would following equivalent would be compiled:

    (serial2->config << Serial::Config::DATALEN_16_BITS) | Serial;

Regbit's insert operator intentionally returns void (not regbits::Reg&) because otherwise the above would result in two operations to the hardware register, which would be inefficient and possible problematic (see below regarding non-memory-like semantics of microcontroller registers).

This release of regbits -- for lack of a better alternative -- uses "/=":

    serial2->config /= Serial::Config::DATALEN_16_BITS;

Not ideal, but possibly the best of the various poor options. An (unconvincing) argument can be made that the operator "divides" the register before subsequently inserting the mskd_t object's value.

Admittedly, there is possible confusion between:

    serial2->config /= Serial::Config::DATALEN_16_BITS;
    serial2->config |= Serial::Config::DATALEN_16_BITS;

both of which are valid, useful, but different operators. The fact that the glyphs are sufficiently distinct in most software-coding fonts partly alleviates the problem. And finally, to close out this overly-long section:

    serial2->config %= Serial::Config::DATALEN_16_BITS;

was considered too ugly and confusing. Alternate suggestions (if any exist) welcome, and please feel free to use the equivalent, verbose regbits ins method:

    serial2->config.ins(Serial::Config::DATALEN_16_BITS);

Templates for numerically-defined constants

Constants defining regbits Bits and Mskd objects are intended to generally be declared with semantically-meaningful names, as per above.

This scheme is workable (though tedious) up through, for example, defining 32 individual bits in a 32-bit register:

    static constexpr pos_t  PORT_0_POS  = pos_t( 0),
                            PORT_1_POS  = pos_t( 1),
                            PORT_2_POS  = pos_t( 2),
                            PORT_3_POS  = pos_t( 3),
                            PORT_4_POS  = pos_t( 4),
                            PORT_5_POS  = pos_t( 5),
                            PORT_6_POS  = pos_t( 6),
                            PORT_7_POS  = pos_t( 7),
                            PORT_8_POS  = pos_t( 8),
                            PORT_9_POS  = pos_t( 9),
                            PORT_10_POS = pos_t(10),
                            PORT_11_POS = pos_t(11),
                            PORT_12_POS = pos_t(12),
                            PORT_13_POS = pos_t(13),
                            PORT_14_POS = pos_t(14),
                            PORT_15_POS = pos_t(15),
                            PORT_16_POS = pos_t(16),
                            PORT_17_POS = pos_t(17),
                            PORT_18_POS = pos_t(18),
                            PORT_19_POS = pos_t(19),
                            PORT_20_POS = pos_t(20),
                            PORT_21_POS = pos_t(21),
                            PORT_22_POS = pos_t(22),
                            PORT_23_POS = pos_t(23),
                            PORT_24_POS = pos_t(24),
                            PORT_25_POS = pos_t(25),
                            PORT_26_POS = pos_t(26),
                            PORT_27_POS = pos_t(27),
                            PORT_28_POS = pos_t(28),
                            PORT_29_POS = pos_t(29),
                            PORT_30_POS = pos_t(30),
                            PORT_31_POS = pos_t(31);

    static constexpr bits_t PORT_0  = bits_t(1, PORT_0_POS ),
                            PORT_1  = bits_t(1, PORT_1_POS ),
                            PORT_2  = bits_t(1, PORT_2_POS ),
                            PORT_3  = bits_t(1, PORT_3_POS ),
                            PORT_4  = bits_t(1, PORT_4_POS ),
                            PORT_5  = bits_t(1, PORT_5_POS ),
                            PORT_6  = bits_t(1, PORT_6_POS ),
                            PORT_7  = bits_t(1, PORT_7_POS ),
                            PORT_8  = bits_t(1, PORT_8_POS ),
                            PORT_9  = bits_t(1, PORT_9_POS ),
                            PORT_10 = bits_t(1, PORT_10_POS),
                            PORT_11 = bits_t(1, PORT_11_POS),
                            PORT_12 = bits_t(1, PORT_12_POS),
                            PORT_13 = bits_t(1, PORT_13_POS),
                            PORT_14 = bits_t(1, PORT_14_POS),
                            PORT_15 = bits_t(1, PORT_15_POS),
                            PORT_16 = bits_t(1, PORT_16_POS),
                            PORT_17 = bits_t(1, PORT_17_POS),
                            PORT_18 = bits_t(1, PORT_18_POS),
                            PORT_19 = bits_t(1, PORT_19_POS),
                            PORT_20 = bits_t(1, PORT_20_POS),
                            PORT_21 = bits_t(1, PORT_21_POS),
                            PORT_22 = bits_t(1, PORT_22_POS),
                            PORT_23 = bits_t(1, PORT_23_POS),
                            PORT_24 = bits_t(1, PORT_24_POS),
                            PORT_25 = bits_t(1, PORT_25_POS),
                            PORT_26 = bits_t(1, PORT_26_POS),
                            PORT_27 = bits_t(1, PORT_27_POS),
                            PORT_28 = bits_t(1, PORT_28_POS),
                            PORT_29 = bits_t(1, PORT_29_POS),
                            PORT_30 = bits_t(1, PORT_30_POS),
                            PORT_31 = bits_t(1, PORT_31_POS);

It becomes completely untenable with larger potential numbers of constants:

    static constexpr pos_t      AUTORELOADER_POS = pos_t(0);

    static const uint32_t       AUTORELOAD_MASK   = 0x00ffffff;

    static constexpr mskd_t     AUTORELOAD_0(AUTORELOAD_MASK, 0, AUTORELOADER_POS),
                                AUTORELOAD_1(AUTORELOAD_MASK, 1, AUTORELOADER_POS),
                                AUTORELOAD_2(AUTORELOAD_MASK, 2, AUTORELOADER_POS),
                                // 16777212 more ...
                                AUTORELOAD_ffffff(AUTORELOAD_MASK, 0xffffff, AUTORELOADER_POS);

Regardless this problem, the symbolic names provide little additional value compared to some means of specifying the objects by numeric value (as long as type-safety and range checking is maintained):

    // fictitious example, for illustration only
    timer2->autoreload = Timer::Autoreload::mskd_t(9347);

To work around the problem, regbits supports the following function template. Because it is verbose and may need to be used many times in an mcu/peripheral/register definition file, a parameterized preprocessor macro is provided:

    #define REGBITS_MSKD_RANGE(CLASS, CONSTEXPR_FUNC, RUNTIME_FUNC, VALID_FUNC, MASK, POS, LIMIT) \

The macro first defines a shft_t constant (see Shifted values, above):

    static constexpr shft_t          CONSTEXPR_NAME##_SHFT       \
                                = shft_t(CONSTEXPR_NAME##_MASK,  \
                                         CONSTEXPR_NAME##_POS ); \

It then defines a function template for compile time generation of a static mskd_t object with the appropriate .mask() and .bits() values:

    template<unsigned BITS> static constexpr mskd_t CONSTEXPR_FUNC() { \
        static_assert(BITS <= LIMIT, \
                      CLASS "::" #CONSTEXPR_FUNC "<BITS> out of range"); \
        return mskd_t(MASK, BITS, POS); \
    } \
    // macro continues, discussed below

Client code uses this to instantiate desired constant objects as follows:

    Timer::Autoreload::AUTORELOAD<9347>();

Yes, the syntax is ugly, but because C++ can currently only static_assert on template parameters it is the only way the range checking can be implemented. (Note: There may be other workarounds but the ones this author has seen far exceed his tolerance for template metaprogramming cleverness and obfuscation. Please support proposals such as this one to fix the problem in future C++ standards.)

The above function template takes care of the problem with constexpr objects, which is the main thrust of regbits. However, there may be valid use cases for generating regbits Bits and Mskd objects at runtime using variable data.

The REGBITS_MSKD_RANGE macro continues, defining two runtime, non-templated, functions. The first is:

    static const mskd_t RUNTIME_FUNC( \
    const unsigned    bits) \
    { \
        return mskd_t(MASK << POS.pos(), bits << POS.pos()); \
    } \

This generates a Mskd object with the specified bits, using the mask defined in the macro invocation. It intentionally does no range checking, for two reasons. First, regbits is intended to be maximally efficient at runtime (the whole rationale for type-safety and range checking at compile time).

Second, regbits is intended to be used in a "bare metal" ("silicon") runtime environment, generally without C++ exceptions (or virtual methods or even dynamic memory). Given that there is no possibility of throwing an exception for out-of-range values, it is felt that the alternative -- silently clamping the value to be within range -- is a poor design decision which would typically push the inevitable code failure further down the execution path where it would be harder to find. (This is even considering the fact that the out-of-range value will very probably overwrite other, possibly crucial, bits in the register.) "Fail early, fail fast."

Range checking is still desirable, so it is provided by the third and final preprocessor-macro-defined function:

    static bool VALID_FUNC( \
    const unsigned  bits) \
    { \
        return bits <= LIMIT; \
    }

In this way it is up to the client code (i.e. programmer) to decide if and when to include runtime range checking.

gcc/g++ compiler bug

Unfortunately, the Unit test suite, below, reveals what is almost certainly a bug in the following release of ARM gcc/g++:

    (GNU Tools for Arm Embedded Processors 8-2018-q4-major) 8.2.1 20181213 (release) [gcc-8-branch revision 267074]

The unit test suite, as well as the author's production code, places aliases for global objects in one or more configuration (.hxx) files. This is tested in the unit test suite's regbits.cxx via:

    namespace app_config {
    static const Serial::Config::pos_t
    SERIAL_CONFIG_POS = Serial::Config::POLARITY_POS;

    static const Serial::Config::bits_t
    SERIAL_CONFIG_BITS = Serial::Config::POLARITY;

    static const Serial::Config::mskd_t
    SERIAL_CONFIG_MSKD = Serial::Config::DATALEN_16_BITS;

    #ifdef GCC_ARM_BUG
    #include <stddef.h>
    static volatile uint32_t&          GPIO_WORD
                                    = *(  reinterpret_cast<uint32_t*>(gpio1)
                                        + (offsetof(mcu::Gpio, words) >> 2 )
                                        + 3                                   );
    #else
    static volatile uint32_t&        GPIO_WORD = gpio1->words.WORDS<3>();
    #endif

    static const Timer::Prescale::shft_t
    TIMER_PRESCALER_SHIFT = Timer::Prescale::PRESCALER_HIGH_SHFT;

    static Serial* const    SERIAL = serial2;
    }

The #else branch of the preprocessor conditional (which is not compiled by default) produces erroneous code.

This has been confirmed by running the unittests under GNU/Linux:

    g++ (SUSE Linux) 4.8.5
    Copyright (C) 2015 Free Software Foundation, Inc.

where the #else code produces slightly inefficient code (see Performance claims regarding executable object code speed and size, below) that nevertheless produces the correct results. Additionally, gdb has been used to step through the two versions of the code (resulting from use of one or the other of the unit32_t& #ifdefs) which confirmed the correct behaviors.

When compiled and run on an ARM MCU with above gcc-arm compiler, the #ifdef GCC_ARM_BUG implementation functions correctly. This has been confirmed by:

  1. Comparing the disassembled object code to that from the struct.c C structures implementation (the code is identical)

  2. Comparing the gdb results from the unittests (see Running the unittests, below)

  3. Stepping through the binary's execution using gdb, as per the following commented output:

Set breakpoint and run (continue instead of run required in embedded GDN):

    (gdb) break assign_array_global
    Breakpoint 1 at 0x10000684: file ../../../../regbits.cxx, line 1123.
    (gdb) continue
    Continuing.
    Breakpoint 1, assign_array_global () at ../../../../regbits.cxx:1123
    1123        app_config::GPIO_WORD = 189;

Hit breakpoint, disassemble code:

    (gdb) disassemble
    Dump of assembler code for function assign_array_global():
    => 0x10000684 <+0>:     ldr     r3, [pc, #8]    ; (0x10000690 <assign_array_global()+12>)
       0x10000686 <+2>:     ldr     r3, [r3, #0]
       0x10000688 <+4>:     movs    r2, #189        ; 0xbd
       0x1000068a <+6>:     str     r2, [r3, #0]
       0x1000068c <+8>:     bx      lr
       0x1000068e <+10>:    nop                     ; (mov r8, r8)
       0x10000690 <+12>:    asrs    r4, r3, #23
       0x10000692 <+14>:    asrs    r0, r0, #32
    End of assembler dump.

Note gdb is confused by the 32-bit data word at the end of the function. The two asrs instructions are actually an address to be loaded as per the instruction at address 0x10000684:

    (gdb) x/1wx 0x10000690
    0x10000690 <assign_array_global()+12>:  0x100015dc

Step through function:

    (gdb) set disassemble-next-line on
    (gdb) x/1wx 0x100015dc
    0x100015dc <_ZN10app_configL9GPIO_WORDE>:       0x00000000
    (gdb) p/x $pc
    $1 = 0x10000684
    (gdb) display/x $r3
    1: /x $r3 = 0x0
    (gdb) display/x $r2
    2: /x $r2 = 0x58
    (gdb) display
    1: /x $r3 = 0x0
    2: /x $r2 = 0x58
    (gdb) nexti
    0x10000686      1123        app_config::GPIO_WORD = 189;
       0x10000684 <assign_array_global()+0>:        02 4b   ldr     r3, [pc, #8]    ; (0x10000690 <assign_array_global()+12>)
    => 0x10000686 <assign_array_global()+2>:        1b 68   ldr     r3, [r3, #0]
       0x10000688 <assign_array_global()+4>:        bd 22   movs    r2, #189        ; 0xbd
       0x1000068a <assign_array_global()+6>:        1a 60   str     r2, [r3, #0]
       0x1000068c <assign_array_global()+8>:        70 47   bx      lr
       0x1000068e <assign_array_global()+10>:       c0 46   nop                     ; (mov r8, r8)
       0x10000690 <assign_array_global()+12>:       dc 15   asrs    r4, r3, #23
       0x10000692 <assign_array_global()+14>:       00 10   asrs    r0, r0, #32
    1: /x $r3 = 0x100015dc
    2: /x $r2 = 0x58

The address has been loaded into ARM core register r3. Continue:

    (gdb) nexti
    0x10000688      1123        app_config::GPIO_WORD = 189;
       0x10000684 <assign_array_global()+0>:        02 4b   ldr     r3, [pc, #8]    ; (0x10000690 <assign_array_global()+12>)
       0x10000686 <assign_array_global()+2>:        1b 68   ldr     r3, [r3, #0]
    => 0x10000688 <assign_array_global()+4>:        bd 22   movs    r2, #189        ; 0xbd
       0x1000068a <assign_array_global()+6>:        1a 60   str     r2, [r3, #0]
       0x1000068c <assign_array_global()+8>:        70 47   bx      lr
       0x1000068e <assign_array_global()+10>:       c0 46   nop                     ; (mov r8, r8)
       0x10000690 <assign_array_global()+12>:       dc 15   asrs    r4, r3, #23
       0x10000692 <assign_array_global()+14>:       00 10   asrs    r0, r0, #32
    1: /x $r3 = 0x0
    2: /x $r2 = 0x58

This above is where the error occurs. The value at 0x100015dc should be the address of the gpio1->words.WORDS<3>() array member. Instead, the compiler has not initialized it correctly -- in fact, in this ELF executable it is in the uninitialized .bss segment).

Continuing, the code incorrectly sets address zero to to the desired value of 189, with potentially disastrous results:

    (gdb) nexti
    0x1000068a      1123        app_config::GPIO_WORD = 189;
       0x10000684 <assign_array_global()+0>:        02 4b   ldr     r3, [pc, #8]    ; (0x10000690 <assign_array_global()+12>)
       0x10000686 <assign_array_global()+2>:        1b 68   ldr     r3, [r3, #0]
       0x10000688 <assign_array_global()+4>:        bd 22   movs    r2, #189        ; 0xbd
    => 0x1000068a <assign_array_global()+6>:        1a 60   str     r2, [r3, #0]
       0x1000068c <assign_array_global()+8>:        70 47   bx      lr
       0x1000068e <assign_array_global()+10>:       c0 46   nop                     ; (mov r8, r8)
       0x10000690 <assign_array_global()+12>:       dc 15   asrs    r4, r3, #23
       0x10000692 <assign_array_global()+14>:       00 10   asrs    r0, r0, #32
    1: /x $r3 = 0x0
    2: /x $r2 = 0xbd
    (gdb) x/1wx 0
    0x0:    0x10002000
    (gdb) nexti
    0x1000068c      1123        app_config::GPIO_WORD = 189;
       0x10000684 <assign_array_global()+0>:        02 4b   ldr     r3, [pc, #8]    ; (0x10000690 <assign_array_global()+12>)
       0x10000686 <assign_array_global()+2>:        1b 68   ldr     r3, [r3, #0]
       0x10000688 <assign_array_global()+4>:        bd 22   movs    r2, #189        ; 0xbd
       0x1000068a <assign_array_global()+6>:        1a 60   str     r2, [r3, #0]
    => 0x1000068c <assign_array_global()+8>:        70 47   bx      lr
       0x1000068e <assign_array_global()+10>:       c0 46   nop                     ; (mov r8, r8)
       0x10000690 <assign_array_global()+12>:       dc 15   asrs    r4, r3, #23
       0x10000692 <assign_array_global()+14>:       00 10   asrs    r0, r0, #32
    1: /x $r3 = 0x0
    2: /x $r2 = 0xbd
    (gdb) x/1wx 0
    0x0:    0x000000bd

In this case (fortunately) the program doesn't crash because the LPC824 ARM Cortex-M0+ MCU it is running on has 32K of flash memory (unwritable except via special techniques) starting at address 0.

To conclude, the following is the same code running on GNU/Linux x86-64 with gcc/g++ 4.8.5 showing the correct address being loaded and stored to:

    (gdb) b assign_array_global
    Breakpoint 1 at 0x400f4b: file ../regbits.cxx, line 1125.
    (gdb) run
    ...
    Breakpoint 1, assign_array_global () at ../regbits.cxx:1125
    1125        app_config::GPIO_WORD = 189;
    Missing separate debuginfos, use: zypper install libgcc_s1-debuginfo-5.3.1+r233831-6.1.x86_64 libstdc++6-debuginfo-5.3.1+r233831-6.1.x86_64
    (gdb) disassemble 
    Dump of assembler code for function assign_array_global():
    => 0x0000000000400f4b <+0>:     mov    0x20314e(%rip),%rax        # 0x6040a0 <_ZN10app_configL9GPIO_WORDE>
       0x0000000000400f52 <+7>:     movl   $0xbd,(%rax)
       0x0000000000400f58 <+13>:    retq   
    End of assembler dump.
    (gdb) p/x $rip
    $1 = 0x400f4b
    (gdb) p/x $rax
    $2 = 0x0
    (gdb) p/x $rip + 0x20314e + 7
    $5 = 0x6040a0
    (gdb) x/1wg 0x6040a0
    0x6040a0 <_ZN10app_configL9GPIO_WORDE>: 0x000000000070012c
    (gdb) set disassemble-next-line on
    (gdb) nexti
    0x0000000000400f52      1125        app_config::GPIO_WORD = 189;
       0x0000000000400f4b <assign_array_global()+0>:        48 8b 05 4e 31 20 00    mov    0x20314e(%rip),%rax        # 0x6040a0 <_ZN10app_configL9GPIO_WORDE>
    => 0x0000000000400f52 <assign_array_global()+7>:        c7 00 bd 00 00 00       movl   $0xbd,(%rax)
       0x0000000000400f58 <assign_array_global()+13>:       c3      retq   
    (gdb) p/x $rip
    $6 = 0x400f52
    (gdb) p/x $rax
    $7 = 0x70012c
    (gdb) x/1xw 0x70012c
    0x70012c:       0x00000000
    (gdb) nexti
    0x0000000000400f58      1125        app_config::GPIO_WORD = 189;
       0x0000000000400f4b <assign_array_global()+0>:        48 8b 05 4e 31 20 00    mov    0x20314e(%rip),%rax        # 0x6040a0 <_ZN10app_configL9GPIO_WORDE>
       0x0000000000400f52 <assign_array_global()+7>:        c7 00 bd 00 00 00       movl   $0xbd,(%rax)
    => 0x0000000000400f58 <assign_array_global()+13>:       c3      retq   
    (gdb) x/1xw 0x70012c
    0x70012c:       0x000000bd

Comments and/or suggestions welcome, particularly if they identify errors in the unittest codebase which may have triggered this problem.

Unit test

A unit test suite is provided here. The suite is designed to test three aspects of regbits:

  1. Type-safe error detection
  2. Computational correctness
  3. Performance claims (executable object code speed and size)

Type-safe error detection

Type-safe (and other) error detection is tested in the linux and arm subdirectories under the bad directory.

"cd" to either of the subdirectories and run "make". The Makefile will attempt to build ("g++ -c") each of the *.cxx tests and confirm that, as intended, they fail to compile. For completeness, running "make GOOD=-DGOOD" will confirm that code without errors does compile (this detects potential bugs such as a missing include file producing an error that masks the intended regbits type-safety error).

Computational correctness

Four different implementations of the tests are included. Each consists of a header definition file (peripheral and register definitions for a fictitious MCU), and a test suite source file. Each implementation should perform the same computations and produce the same results.

Executable binaries to exercise these four versions can be built in the following directories. All four tests are run and their results compared; if any differ it is known that a problem exists.

Linux

Regbits is intended for use in standalone MCU applications. However, nothing precludes its use in other environments (and in fact it may be useful for writing device drivers, in OS kernels, etc).

The linux version of the unittest suite is included for ease of testing under the Linux operating system without the need for embedded development testbed. It reports relative sizes of the four implementations' object code,execution speed in terms of the Linux clock_gettime() system call, and sizes of the individual tests. The sizes may be useful for comparing the implementations despite the radical differences between the native Linux and the (ARM) embedded compilers, and the latter (speed) for comparison despite the non-deterministic nature of timing when running under a multitasking OS.

To run the Linux unittest, type "make" in that directory. This will build and run executables for the four versions, and collate the results (see below). The Makefile has many configuration variables that can be overridden on the make commandline.

Embedded testbed

Three sample embedded testbeds are included: An ARM Cortex-M0+ MCU lpc824, and ARM Cortex-M3 MCU stm32f103xb, and an ARM Cortex-M7 MCU stm32f767xx. Each is of course completely specific to one particular MCU, but any can be used as a template for other MCUs.

Running the unittest is broken into two steps. Typing "make" will build the four implementations' binaries, including disassembled object code (see below) and information about the resultant object code size.

The Makefile.arm has many configuration variables (including ARM-specific ones) that can be overridden on the make commandline. Additionally, an environment variable, GCC_ARM_ROOT, must be set to point to the compiler's installed location.

Actually running the executables on the target embedded system is broken out as the second step, invoked by typing "make gdb", to allow the first to run without requiring attached development hardware.

Disassembled object code

The Makefiles (specifically the embedded Makefile, Makefile.arm, but also the Linux Makefile) disassemble the four implementation executables into files such as the LPC824 versions, regbits.elf.dmp, struct.elf.dmp, raw.elf.dmp, and bitfield.elf.dmp. These listings are intended for manual inspection to confirm that each is producing object code that will produce the same results. Suggestion: Use a good visual "diff" tool like meld or kompare to view the files side-by-side.

Running the unittests

As per above, run the unittests by typing "make" in the linux directory, or "make" followed by "make gdb" in the subdirectories of the embedded directory.

The unittests are specifically written to be run under gdb in order to remove any requirements for I/O in the executables, as that would influence both speed and size performance. The unittest code calls do_test() in each version's main() (see linux main.c and embedded main.c) to initialize pseudo-/test-registers, run a single test, and store the result.

The provided GDB scripts (linux unittest.gdb and embedded unittest.gdb) run the executables under gdb, hit a breakpoint at the end of execution, dump the test results to a file, and exit. Note that the embedded version requires an environment variable, GDB_OPENOCD, naming a program (typically a UNIX shell script) which runs gdb with appropriate connection to the target embedded system. That program (not included as it is completely development environment specific) also need to pass its commandline arguments to gdb as this is how the unittest.gdb script is loaded.

The "make" (or "make gdb") command will run the unittest.py script to collate the output files from gdb. If no differences between the four implementations are found it will only output information comparing their code sizes and execution speeds. Any differences will be listed with the name of the test that failed, and data from each test's saved (pseudo/test) registers. The unittest.py script also reports the code size of each of the individual unit test functions, and specifically cases where the regbits implementation is not as efficient as others.

Performance claims

The four versions of the unit tests (regbits, C structs, raw C pointers and offsets, and C bitfields) were written in an attempt to make the comparisons "fair". For example, in the C struct implementation (struct.c) it would be "natural" to pass arguments by reference separately:

    __attribute__((noinline)) void mskd_ref(
    const uint32_t    *mask,
    const uint32_t    *bits)
    {
        CHG_BITS(SERIAL2->CONFIG, mask, bits);
        CHG_BITS(SERIAL2->CONFIG, mask, bits);
    }

    __attribute__((noinline)) void call_mskd_ref()
    {
        uint32_t    mask   = SERIAL_CONFIG_DATALEN_MSK,
                    bits_a = SERIAL_CONFIG_DATALEN_16_BITS,
                    bits_b = SERIAL_CONFIG_DATALEN_32_BITS;

        mskd_ref(mask, bits_a);
        mskd_ref(mask, bits_b);

        SERIAL2->CONFIG &= ~SERIAL_CONFIG_POLARITY; // clear for periph_reg_bits_val
    }

However, since regbits passes a single object by reference:

    __attribute__((noinline)) void mskd_ref(
    const Serial::Config::mskd_t        &config)
    {
        serial2->config /=  config;
        serial2->config.ins(config);
    }

    __attribute__((noinline)) void call_mskd_ref()
    {
        Serial::Config::mskd_t    config = Serial::Config::DATALEN_16_BITS;

        mskd_ref(config);
        mskd_ref(+Serial::Config::DATALEN_32_BITS);

        serial2->config -= Serial::Config::POLARITY; // clear for periph_reg_bits_val
    }

The struct version was written to match that as closely as possible:

    __attribute__((noinline)) void mskd_ref(
    const uint32_t* const    mask_bits)
    {
        CHG_BITS(SERIAL2->CONFIG, mask_bits[0], mask_bits[1]);
        CHG_BITS(SERIAL2->CONFIG, mask_bits[0], mask_bits[1]);
    }



    __attribute__((noinline)) void call_mskd_ref()
    {
        uint32_t    mask_bits_a[2] = {SERIAL_CONFIG_DATALEN_MSK    ,
                                      SERIAL_CONFIG_DATALEN_16_BITS},
                    mask_bits_b[2] = {SERIAL_CONFIG_DATALEN_MSK    ,
                                      SERIAL_CONFIG_DATALEN_32_BITS};

        mskd_ref(mask_bits_a);
        mskd_ref(mask_bits_b);

        SERIAL2->CONFIG &= ~SERIAL_CONFIG_POLARITY; // clear for periph_reg_bits_val
    }

Results

The testbed was run on 3 different MCUs at three different compiler optimization levels each. Compiler used was:

    (GNU Tools for Arm Embedded Processors 8-2018-q4-major) 8.2.1 20181213 (release) [gcc-8-branch revision 267074]

Each MCU was run at its default clock speed, but in any case execution times listed below are in terms of the ARM SysTick counter so should be independent of clock speed as long as there are no wait states for memory accesses (which should be the case as all tests were run with code and data in on-chip RAM).

The following are excerpts from the tests' output, all of which are included in full in the O1, O2, and O3 subdirectories under the unittest/arm/cortex-*/<vendor>/<mcu> directories.

    compile: lpc824 cortex-m0plus apcs-gnu -O1 -g3 -DGCC_ARM_BUG c++11
    bitfield.out            <too large to fit in 8K RAM>
    raw.out                 size: 3644      time: 8210
    regbits.out             size: 3520      time: 8050
    struct.out              size: 3652      time: 8258

    compile: lpc824 cortex-m0plus apcs-gnu -O2 -g3 -DGCC_ARM_BUG c++11
    bitfield.out            <too large to fit in 8K RAM>
    raw.out                 size: 3632      time: 7930
    regbits.out             size: 3508      time: 7734
    struct.out              size: 3636      time: 7978

    compile: lpc824 cortex-m0plus apcs-gnu -O3 -g3 -DGCC_ARM_BUG c++11
    bitfield.out            <too large to fit in 8K RAM>
    raw.out                 size: 3708      time: 7846
    regbits.out             size: 3592      time: 7668
    struct.out              size: 3712      time: 7894

    compile: stm32f103 cortex-m3 apcs-gnu -O1 -g3 -DGCC_ARM_BUG c++11
    bitfield.out            size: 5332      time: 11332
    raw.out                 size: 3452      time: 9156
    regbits.out             size: 3312      time: 8928
    struct.out              size: 3468      time: 9230

    compile: stm32f103 cortex-m3 apcs-gnu -O2 -g3 -DGCC_ARM_BUG c++11
    bitfield.out            size: 4996      time: 10974
    raw.out                 size: 3376      time: 9002
    regbits.out             size: 3200      time: 8688
    struct.out              size: 3400      time: 9080

    compile: stm32f103 cortex-m3 apcs-gnu -O3 -g3 -DGCC_ARM_BUG c++11
    bitfield.out            size: 5268      time: 10520
    raw.out                 size: 3424      time: 8878
    regbits.out             size: 3264      time: 8596
    struct.out              size: 3440      time: 8956

    compile: stm32f767xx cortex-m7 apcs-gnu -O1 -g3 -DGCC_ARM_BUG c++11
    bitfield.out            size: 5340      time: 19427
    raw.out                 size: 3460      time: 16116
    regbits.out             size: 3324      time: 16099
    struct.out              size: 3476      time: 16602

    compile: stm32f767xx cortex-m7 apcs-gnu -O2 -g3 -DGCC_ARM_BUG c++11
    bitfield.out            size: 5000      time: 17947
    raw.out                 size: 3380      time: 17022
    regbits.out             size: 3204      time: 15875
    struct.out              size: 3404      time: 16374

    compile: stm32f767xx cortex-m7 apcs-gnu -O3 -g3 -DGCC_ARM_BUG c++11
    bitfield.out            size: 5272      time: 18661
    raw.out                 size: 3432      time: 15850
    regbits.out             size: 3268      time: 15766
    struct.out              size: 3448      time: 17139

Note these overall rankings do not prove that each individual test performs in the same best-to-worst order. Also note that the constant-between-versions overhead of saving data during execution likely causes underestimation of the actual differences in speed.

To understand the exact differences, the individual *.elf.dmp files should be examined. However, as almost all ARM Thumb instructions execute in one cycle, comparing the relative sizes of the four implementation's individual tests is alternately a good indicator of their relative speeds. To that end, the unittest.py reports those sizes, and cases where the regbits implementation is larger than the corresponding struct or raw.

In almost all cases the regbits version is as small or smaller than the three C versions. Exceptions in which the C bitfield version is smallest are somewhat misleading -- most of those cases are passing values from a one function to another, and in most, the increased size of the bitfield "callee" function is larger than the decreased "caller" size. Additionally, the semantics of the bitfield version -- where separate parameters specifying which bitfield is to be operated on -- are so different from the regbits/struct/raw versions (which pass bits and bit masks) as to make comparisons somewhat meaningless. (Note that the bitfield version was written and tested for primarily for completeness` sake.)

Cases where regbits produced larger code than the C structs or raw C implementations are listed below. "*" indicates implementation(s) with the best results (smallest code size in number of bytes). The disassembled object code was closely reviewed, and observations from those analyses are included below each MCU/architecture/optimization's results:

    compile: lpc824 cortex-m0plus apcs-gnu -O1 -g3 -DGCC_ARM_BUG c++11
       regbits    struct       raw  bitfield
          26        24 *      24 *      26      check_array_range_pass
          20        20        12 *      28      return_reg
        1244      1192 *    1192 *    1192 *    run

regbits check_array_range_pass has nop for function address alignment

regbits and struct return_reg use address of peripheral and offset to register. raw uses direct address of register saving two bytes used by others for peripheral address, plus one each extra load and store instruction (two more bytes)

run unimportant

    compile: lpc824 cortex-m0plus apcs-gnu -O2 -g3 -DGCC_ARM_BUG c++11
       regbits    struct       raw  bitfield
          20        20        12 *      28      return_reg
        1236      1192 *    1192 *    1192 *    run

as per above

    compile: lpc824 cortex-m0plus apcs-gnu -O3 -g3 -DGCC_ARM_BUG c++11
       regbits    struct       raw  bitfield
          12        12         8 *       8 *    call_bits_val_const
          12         8 *       8 *       8 *    call_bits_val_global
          12        12         8 *       8 *    call_bits_val_var
          12         8 *       8 *       8 *    call_mskd_val_global
          16        12 *      12 *      12 *    call_pos_val
          12         8 *       8 *       8 *    call_pos_val_global
          12         8 *       8 *      12      call_range_val_port
          20        20        12 *      28      return_reg
        1236      1192 *    1192 *    1192 *    run

Despite all functions being declared with GCC's __attribute__((noinline)) directive, inter-call and/or link time optimization detects that they are used only with constant values. Single-purpose variants of callee functions are generated (similar to C++ partial template specializations) that work via immediate values. For unknown reasons in the regbits code generation, the original caller argument is passed in the R0 register despite being unused (extra two bytes), and has an extra NOP for code alignment (another two bytes).

    compile: stm32f103 cortex-m3 apcs-gnu -O1 -g3 -DGCC_ARM_BUG c++11
       regbits    struct       raw  bitfield
          20        20        12 *      28      return_reg
        1236      1192 *    1192 *    1192 *    run
          26        28        24 *      28      runtime_bits_array

as per above

    compile: stm32f103 cortex-m3 apcs-gnu -O2 -g3 -DGCC_ARM_BUG c++11
       regbits    struct       raw  bitfield
          20        20        12 *      28      return_reg
        1232      1192 *    1192 *    1192 *    run
          28        28        24 *      28      runtime_bits_array

as per above

    compile: stm32f103 cortex-m3 apcs-gnu -O3 -g3 -DGCC_ARM_BUG c++11
       regbits    struct       raw  bitfield
           8         4 *       4 *       4 *    call_mskd_val_global
          16        12 *      12 *      12 *    call_pos_val
          12         8 *       8 *       8 *    call_range_val
           8         4 *       4 *       8      call_range_val_port
          20        20        12 *      28      return_reg
        1232      1192 *    1192 *    1192 *    run
          28        28        24 *      28      runtime_bits_array

as per above

    compile: stm32f767xx cortex-m7 apcs-gnu -O1 -g3 -DGCC_ARM_BUG c++11
       regbits    struct       raw  bitfield
          20        20        12 *      28      return_reg
        1236      1192 *    1192 *    1192 *    run
          28        28        24 *      28      runtime_bits_array

as per above

    compile: stm32f767xx cortex-m7 apcs-gnu -O2 -g3 -DGCC_ARM_BUG c++11
       regbits    struct       raw  bitfield
          20        20        16 *      28      return_reg
        1232      1196 *    1196 *    1196 *    run
          28        28        24 *      28      runtime_bits_array

as per above

    compile: stm32f767xx cortex-m7 apcs-gnu -O3 -g3 -DGCC_ARM_BUG c++11
       regbits    struct       raw  bitfield
           8         4 *       4 *       4 *    call_mskd_val_global
          16        12 *      12 *      12 *    call_pos_val
          12         8 *       8 *       8 *    call_range_val
           8         4 *       4 *       8      call_range_val_port
          20        20        16 *      28      return_reg
        1232      1196 *    1196 *    1196 *    run
          28        28        24 *      28      runtime_bits_array

as per above

Future enhancements

Microcontroller registers, as described above, are accessed as if they were memory locations, but need not behave like normal RAM/ROM/FLASH/etc memory.

Registers, or individual bits within them, can implement the following behaviors (among others):

            initial                 final
    mode    value    read   write   value
    ----    -------  ----   -----   -----

              0       0       0       0
    normal    0       0       1       1
              1       1       0       0
              1       1       1       1

              0       0       0       0
    read      0       0       1       0
    only      1       1       0       1
              1       1       1       1

              0       0       0       0
    set       0       0       1       1
    only      1       1       0       1
              1       1       1       1

              0       0       0       0
    write     0       0       1       0
    clear     1       1       0       1
              1       1       1       0

              0       0       0       0
    read      0       0       1       0
    clear     1       1       0       0
              1       1       1       0

All of these behaviors are useful. For example, "read clear" is often used for interrupt registers, enabling software to query the status of an interrupt and clear it in one operation. (This does, however, make debugging difficult as querying the register in a debugger destroys its value, and subsequent reads by software will behave differently than they would otherwise. For this reason the author calls them "Schrodinger's Cat" registers.)

As another example, "set only" registers or bits are often used for setting state. They allow setting one or more bits as desired, without affecting other bits in the register. This eliminates the need for regbit's |= operator:

    serial2->config |= Serial::Config::ENABLE;

or the other approach's equivalent:

    SERIAL2->CONFIG |= SERIAL_CONFIG_ENABLE;

allowing the simpler and more efficient:

    serial2->config = Serial::Config::ENABLE;

    SERIAL2->CONFIG = SERIAL_CONFIG_ENABLE;

Regbits could be enhanced to allow defining the various register/bit behaviors, and use this information to chose, in a type-aware manner, the appropriate technique for accessing registers/bits, and/or disallow (compile-time error) incorrect usage such as writing to a read-only register/bit.

Releases

No releases published

Packages

No packages published