This repository contains scripts which allow MikroTik RouterOS devices to have its OS, packages, and firmware always up to date. About all updates and failures email notifications are sent.
These scripts perform these operations:
- Check if package updates available (same as
System -> PackagesandCheck For Updates) - If updates available, send start update notification email
- Initialize packages update
- After updates the device reboots
- On start check if RouterOS updated, and notify this by email
- Initialize firmware upgrade (same as
System -> RouterboardandUpgrade) - Wait firmware installed and reboot
- After rebooted, send email notification about update completion
Email sending requires valid POP server configuration. You can configure it once using Email Settings of WinBox or WebFig by opening:
Tools -> Email
Or use terminal and /tool email commands.
Update process requires reboots after RouterOS and firmware updates. Email notification requires internet connection to send notifications. That's why WAN status check exists in system-upgrade.rsc script. The scripts waits when Internet connection established and then continues update. Current version of the script checks PPPoE connection state. Connection name is set in local variable which you need to update with your connection name:
:local connection "connection-name";
If your WAN is not PPPoE, set your type of connection at line 19:
/interface pppoe-client monitor $connection
Instead of pppoe-client there could be ppp-client, ovpn-client, or else. Maybe your "wait for internet connection" logic will be different.
Script system-email.rsc contains email of updates email recipient. Update it it with your email:
:local to "notification.email@example.com"
Add scripts using System -> Scripts window. Give them names of script files without extensions:
- system-update
- system-upgrade
- system-email
In order to run updates periodically, create one scheduler entry using System -> Scheduler window. Give it any name, and set On Event property to this command:
/system script run system-update
Please note that during RouterOS updates the device will be down and rebooted two times, so take this into consideration when configuring scheduler trigger time. Usual downtime is up to 5 minutes, including wait for PPPoE connections after reboots. Updates happen only when there are new packages available, otherwise the device stays up without interruptions.