Advanced IR Remote Application for Flipper Zero Device

Flip-Clock smart alarm-clock

MicroPython examples for YS-IRTM 5V NEC Infrared UART transceivers

AVR Library (Atmega48/88/168/328) to decode IR commands from a remote control in NEC format.

Quick IR Value Tester

Arduino IR repeater

RPi & IR: Raspberry Pi GPIO & Infrared remote controls (using pigpio instead of lirc)

This is an 'execution process' for IRPs, extended to encode and decode IR remote commands, in php.

Transparent HUD for an Airsoft gun that shows how many BBs are left in your magazine and keeps track of your number of kills and deaths during a match. A XIAO ESP32-C3 is used together with a SSD1309 transparent OLED display. An IR Transmitter LED and IR Receiver sensor is used to detect BBs. Video: https://youtu.be/BZJjDX5xyRM

This is a Quartus Prime FPGA project testing the functionality of the LogiFind Altera Cyclone IV EP4CE6E22C8N Development Board. This product can also be found on eBay where I bought it from. I hope to provide base code that will help others in their learning with this development board.

Remote control infrared signal receiver programmed in VHDL for a Terasic DE1-SoC board.

VLC/Media player IR Remote for PC (Windows 10). Project for ATtiny85 USB stick + TL1838 IR Receiver Module. Build in Arduino IDE 1.8.x

Raspberry pi HAT with fan and Ir receiver

Examples with wiring diagrams for using some sensors with ESP32-C3, programmed with Rust

Receive infrare data from ir remote with interrupt and timer capture

An Arduino based RGBW dimmer controlled by an IR remote

.NET Core library for accessing infrared (/dev/lirc) devices on a Raspberry Pi.

Communication with consumer IR "remote" signals

Add IR remote as input to any PC Decoding NEC protocol IR pulses from remote control with a Pico and perform keypress as a USB keyboard (HID).

A code for a drawing robot built over #arduino (#funduino) using Keyes L298 Drivers, with IR receiver and Servo motor. Built in #geekcon 2015.