A collection of command line tools for ARM devices with Allwinner SoCs.

Android port that aims to bring both user- and developer-friendly experience in using AOSP with a set of single-board computers (SBC), phones and other devices.

SCP (power management) firmware for sunxi SoCs

miZy - tiny fast embedded linux

Device Tree overlays for sunxi devices running Armbian images with mainline kernel

This is about shaping existing GPL Linux kernel drivers for the PVR/SGX5 architecture so that they can become accepted into drivers/staging. It is NOT about reverse engineering or user-space components (firmware and libraries). Just the device driver. There may also be some glue code here for interfacing to the processor of the SoC (OMAP, Sunxi,…

advanced u-boot (for sunxi Orange Pi Zero | Zero Plus2 h3 | R1, and another sunxi boards ), ready for full load linux from spi-flash, i2c display, FEL mode, and many other improvement

NixOS on Allwinner D1 RISC-V

OS development toolkit for various ARM embedded devices

Open hardware compute module with Allwinner A13 (ARM-A8 @1GHZ), DDR3 (max 512MB) and expansions (USB, GPIO, WiFi, LCD, Audio)

miZy linux kernel 3.4.113+ mod for Orange Pi Zero h2+ / Plus2 h3 and other sunxi boards

A modified driver for using the RTL8188FTV WiFi Radio with Debian, Armbian, and Linux-derivatives for Allwinner/Sunxi (Orange Pi, Banana Pi, etc.) processors and boards.

SPI-flash firmware image builder (for sunxi Orange Pi Zero, another sunxi boards maybe work too )

TRACE32-Scripts is a collection of board specific TRACE32 .cmm scripts(U-Boot/Linux via RNDIS)

Open SBC module based on Allwinner V3s processor

Lichee RV D1 Kernel and U-Boot

Yet another Allwinner FEL Toolkit

A full function(PULL-UP, PULL-DOWN) generic GPIO driver for Allwinner SoCs.

Arm Trusted Firmware with changes for compatibility with Crust

Decompiled DDR memory init for Allwinner Tech T113-s3 SoC