Skip to content
/ mpdq Public

Automatic MPD "smart playlist" creator with minimal but hackable setup.

License

Notifications You must be signed in to change notification settings

uriel1998/mpdq

Repository files navigation

mpdq

Automatic MPD playlist or party mode creator to provide weighted randomness while autoqueuing MPD without relying on external services.

mpdq logo

mpdq in action

Change from prior versions!

The program has been rewritten for simplicity and to avoid subprocesses; each run will add a configurable number of tracks to the queue. Adding a self-contained idle loop is in the roadmap.

Contents

  1. About
  2. License
  3. Prerequisites
  4. Installation
  5. Setup
  6. Usage
  7. TODO

1. About

mpdq is a auto-queing system for MPD to create a flexible and configurable "party mode" effect with randomization and (re)discovery of your own music. Inspired by the eclectic soundtracks of Letterkenny, High Fidelity, Doom Patrol, and many more. (In-depth explanation at my blog).

mpdq will autoqueue random tracks from your existing music library, with per-genre weighting and simple defaults.

Because it uses mpd's own data, new tracks and changes to your music library will be incorporated when mpd is updated.

2. License

This project is licensed under the MIT License. For the full license, see LICENSE.

3. Prerequisites

These are probably already installed or are easily available from your distro on linux-like distros:

ONE or MORE of the following for artist and song information on your $PATH:

mpdq will attempt to use them automatically in the order listed.

4. Installation

Place mpdq.ini in $XDG_CONFIG_HOME/mpdq

[SERVER]
musicdir=/directory/to/music
mpdserver=localhost
mpdport=6600
mpdpass=hackme
songlength=15
queuesize=10
# in hours
rotate_time=1
# in minutes
album_mins=30
artist_mins=30
# Genres to exclude from the above two checks
genres_exclude_album_check=Sound Clip,Classical
musicinfo=/usr/bin/ffprobe

5. Setup

From the INI file

rotate_time in the ini file defines how long mpdq keeps a log for in hours -- and helps define how often each genre will be played.

no_replay_rotate in the ini file defines how long you will not hear a particular track again in hours, like how radio stations used to promise you wouldn't hear the same song twice in a workday. This checks the track filename not the title.

album_mins and artist_mins will separately define the minimum interval in minutes before a specific album or artist will be played again. These should be shorter than no_replay_rotate.

genres_exclude_album_check is a list of genres where the album_mins and artist_mins checks will be disabled, for example, if you have a genre with only one or two artists or albums in it.

Instruction files

The behavior of mpdq is governed by simple instruction files, as many (or few) as you desire. The location of the instruction file does not matter, and must be specified on the command line. Without an instruction file, mpdq will just shuffle through your entire library with an equal weight to each genre.

Each instruction file is a series of lines in the format genre=weight like so:

Default=1
Rock=3
Classical=0

That "weight" is the maximum number of times that genre will be played in the interval you put for rotate_time in the ini file. The Default line is applied to all genres that are not explicitly named in the instruction file.

In the example above, all genres will be played a maximum of 1 time per rotate_time, except Rock, which may be played up to three times per rotate_time, and Classical, which will never be played per rotate_time.

Additionally, the weight will increase the chances of that genre being selected; it increases the number of chances of that genre being selected as well as the maximum number of times per rotate_time. Without that, the playlists are very eclectic at first, then slowly get more and more homogenous, which isn't what we want here.

This allows for both very eclectic selections (as with the example above) or very focused selections, such as with the example below:

Default=0
Industrial=1
Gothic=1

Capitalization Matters

mpdq can also create an example instruction file with all genres listed so that you can check your genre names properly. It won't hurt to have all the genres listed, but it is totally unneeded.

The instruction file should end in a newline. If it does not, mpdq will add one automatically.

If the instruction "default.cfg" exists in the configuration directory, it will automatically be used. If that file does not exist, the default value ("1") will be applied to all genres.

6. Usage

mpdq [-d #][-c /path/to/file][-khe]

mpdq has the following command line switches:

  • -c : Which instruction file to use
  • -d : Override the default priority in the instruction file
  • -k : Kill a currently running mpdq process.
  • -e : Create an example instruction file at $XDG_CONFIG_HOME/mpdq/example_instruction.
  • -f : Force MPD to have the right playback settings (see Pausing the program below).
  • -h : Show a short help message.
  • --loud: Give more feedback to terminal (yes, this means the default is quiet mode)

It should be run as a single run process or using the watch command (e.g. watch -n 60 mpdq).

With each run, mpdq will add queuesize (from the ini file) tracks to MPD queue and then exit.

  • If mpdq.ini is set up properly, you can even just do "random mode" by running mpdq by itself, and setting the frequency using -d.
  • If you've got default.cfg set up as well, you can just run mpdq with no switches.

Because you define the hostname, it does not have to be on the same machine running MPD, but because it does check file existence, you'll have to have an identical music library structure. For example, I use a shared NFS mount.

mpdq logs what songs it has played, and will not repeat the same song during the time specified in mpdq.ini. It does not log songs played or added in any other way.

Pausing the program

Whether being run in single-run mode or the (upcoming) ongoing loop mode, mpdq will keep checking the queue and adding tracks, which isn't always what you want to have happen.

mpdq will not add any tracks to the queue unless:

  • random is off
  • repeat is off
  • consume is on

If you toggle any of those, then mpdq will do nothing (not even rotate the song log).

Advanced Usage

With single-run mode, mpdq reads from the instruction file with each run. This means that you can create different instruction files and either copy them to default.cfg or use the -c switch to change your upcoming (random-ish) music.

7. TODO

  • Add loop back in and utilize relay mechanism to change instruction file
  • Switch between loop mode and single-run mode
  • Add in what to do when all genres run through in logrotate timeperiod
  • Lighterweight way to handle log rotation, since I'm calling it frequently?