Skip to content

Enable writing rspec-puppet tests in YAML rather than Ruby

License

Notifications You must be signed in to change notification settings

wwkimball/rspec-puppet-yaml

Repository files navigation

rspec-puppet-yaml

Build Status Documentation Coverage

This gem enables Puppet module authors to write RSpec unit tests as YAML instead of Ruby (omitting the single, trivial line of code necessary to pass your YAML to RSpec). It also adds a new capability: a trivial means to create test variants (repeat 0-N tests while tweaking any set of inputs and expectations to detect unintended side-effects). If you're more comfortable with YAML than Ruby, or want to easily work with test variants, then you'll want this gem.

While this gem spares you from needing to learn Ruby just to test your Puppet module, you still need to do a little research into what RSpec tests are available to your YAML. The good news is that very knowledge is already documented for the rspec-puppet gem and you just need to know how to translate it into YAML. While not initially obvious, it really is very easy.

The source code examples in this document are expanded or direct translations of each of the matcher samples that are shown in the rspec-puppet README. Copyright for the original examples is owned by the maintainers of that gem and are duplicated here in good faith that these translations into YAML are not competitive and will benefit our common audience. This rpsec-puppet-yaml gem extends the reach of the rspec-puppet gem to include users who speak YAML better than Ruby; rpsec-puppet-yaml does not replace rspec-puppet but rather the written language that is necessary to interact with it (YAML rather than Ruby).

All following examples will be presented both in the original Ruby and in the new YAML for comparison. In the most general terms, you can express an existing RSpec entity in YAML simply by transcribing its name as a Hash key and its attributes or contents as its children. Just know that I decided to use tests instead of it to identify the RSpec examples and I abstracted is_expected.to and is_expected.not_to rather than exposing them directly to YAML. This was both an aesthetic decision and to reduce complexity.

Installation

Add this line to your application's Gemfile:

gem 'rspec-puppet-yaml'

And then execute:

$ bundle

Or install it yourself as:

$ gem install rspec-puppet-yaml

Usage

As per the existing documentation for rspec-puppet, you will still create RSpec entry-point files at your_module/spec/**/*_spec.rb (else rake won't find your tests, YAML or otherwise). However, these files now need only two lines of Ruby code (usually) and no RSpec code. You'll still require your spec_helper as always, and then just call the global-scope entry-point function to parse your YAML into RSpec. The function shown here expects to receive the fully-qualified path and name of your *_spec.rb file, not your YAML file. The function will search for your YAML files based on the automatic value of the __FILE__ variable.

For example:

require 'spec_helper'
parse_yaml_from_spec(__FILE__)

Yes, that's it! You can copy-paste those two lines into every *_spec.rb file and then spend your time writing RSpec Puppet tests in YAML rather than Ruby. To do so, create another file in the same directory with the same base name as your *_spec.rb file except change the extension to .yaml or .yml. In fact, you don't even need the _spec part of the name, so for an RSpec file named my_module_spec.rb, you can use any of these YAML file-names:

  • my_module_spec.yaml
  • my_module_spec.yml
  • my_module.yaml
  • my_module.yml

Fair warning: the parser will look for all of these file-names, so if you create more than one of them, they will all be processed, in turn.

Defining RSpec Puppet YAML Tests

For the most general-case example, this Ruby:

describe 'my_class', :type => 'class' {
  let(:params) { my_attribute => 'value' }

  it { is_expected.to some_matcher.with_attribute('value').and_attribute }

  it { is_expected.not_to another_matcher}
}

becomes this YAML:

describe:
  name: my_class
  type: class
  let:
    params:
      my_attribute: value
  tests:
    some_matcher:
      with_attribute: value
      and_attribute: nil      # nil indicates a matcher method with no arguments
    '!another_matcher': {}    # ! negates the matcher and every matcher needs either a Hash or Array value

NOTE: The top-most entity of every rspec-puppet-yaml file must be a describe. Each describe must have a name attribute. The top-most describe must additionally have a type attribute unless you arrange your *_spec.rb files according to the recommended rspec-puppet directory structure (in which case the class can be automatically derived from its file-system location).

Setting custom facts, parameters, titles, and any other let setting

Ruby:

describe 'my_module' do
  let(:title) { 'baz' }

  let(:params) do
    { 'value'   => 'foo',
      'user'    => :undef,
      'require' => ref('Package', 'sudoku'),
      'nodes'   => {
        ref('Node', 'dbnode') => ref('Myapp::Mycomponent', 'myapp')
      }
    }
  end

  let(:node) { 'testhost.example.com' }

  let(:environment) { 'production' }

  let(:facts) do
    { 'os' => {
        'family'  => 'RedHat',
        'release' => {
          'major' => '7',
          'minor' => '1',
          'full'  => '7.1.1503'
        }
      }
    }
  end

  let(:node_params) do
    { 'hostgroup' => 'webservers',
      'rack'      => 'KK04',
      'status'    => 'maintenance' }
  end

  let(:pre_condition) { 'include other_class' }

  let(:post_condition) { 'include another_class' }

  let(:module_path) { '/path/to/your/module/dir' }

  let(:trusted_facts) do
    { 'pp_uuid' => 'ED803750-E3C7-44F5-BB08-41A04433FE2E',
      '1.3.6.1.4.1.34380.1.2.1' => 'ssl-termination' }
  end
end

YAML:

describe:
  name: my_module
  let:
    title: baz
    node: testhost.example.com
    environment: production
    params:
      value: foo
      user: !ruby/symbol undef  # The symbol-form of `undef` must be used to specify an :undef value
      require: '%{eval:ref("Package", "my-package")}': # %{eval:...} expands into a command and its arguments which is run via `eval`, capturing its return value.  `'` or `"` demarcation of `%{}` is required only because YAML values are forbidden from starting with a `%`.
      nodes:
        '%{eval:ref("Node", "dbnode")}': '%{eval:ref("Myapp::Mycomponent", "myapp")}'
    facts:
      os:
        family: RedHat
        release:
          major: 7
          minor: 1
          full: 7.1.1503
    node_params:
      hostgroup: webservers
      rack: KK04
      status: maintenance
    pre_condition: include other_class
    post_condition: include another_class
    module_path: /path/to/your/module/dir
    trusted_facts:
      pp_uuid: ED803750-E3C7-44F5-BB08-41A04433FE2E
      '1.3.6.1.4.1.34380.1.2.1': ssl-termination

The compile matcher

Ruby:

# Plain test to ensure the module compiles without error
describe "my_module" {
  it { is_expected.to compile }
}

# Expanded test to ensure it compiles with all dependencies
describe "my_module" {
  it { is_expected.to compile.with_all_deps }
}

# Ensure the module *fails* to compile, issuing an expected error message
describe "my_module" {
  it { is_expected.to compile.and_raise_error(/error message match/) }
}

YAML:

# Plain test to ensure the module compiles without error
describe:
  name: my_module
  tests:
    compile: {}


# Expanded test to ensure it compiles with all dependencies
# Multiple ways to achieve the same net effect!
describe:
  name: my_module
  tests:
    compile: true  # `with_all_deps` is the default test when the `compile` matcher is given any "truthy" value

describe:
  name: my_module
  tests:
    compile:  # Methods that don't accept arguments can be called from an Array
      - with_all_deps

describe:
  name: my_module
  tests:
    compile:  # Methods that don't accept arguments can be called from a Hash with nil as their value
      with_all_deps: nil


# Ensure the module *fails* to compile, issuing an expected error message.
# Method 1:  Use a Regular Expression to match part of the error message.  Note
# that in this case, you must identify your value as being a Ruby Regular
# Expression data type with the leading `!ruby/regexp` marker.
describe:
  name: my_module
  tests:
    compile:
      and_raise_error: !ruby/regexp /error message match/

# Method 2:  Match the *entire* error message, not just part of it.  This
# employs a normal String value that requires no additional marker.
describe:
  name: my_module
  tests:
    compile:
      and_raise_error: FULL text of the error message to match

The contain (or create) matcher

Ruby:

# Ensure a set of resources exist in the manifest, some with specific attributes
describe "my_module" {
  it { is_expected.to contain_augeas('bleh') }

  it { is_expected.to contain_class('foo') }

  it { is_expected.to contain_foo__bar('baz') }

  it { is_expected.to contain_package('mysql-server').with_ensure('present') }

  it { is_expected.to contain_package('httpd').only_with_ensure('latest') }

  it do
    is_expected.to contain_service('keystone').with(
      'ensure'     => 'running',
      'enable'     => 'true',
      'hasstatus'  => 'true',
      'hasrestart' => 'true'
    )
  end

  it do
    is_expected.to contain_user('luke').only_with(
      'ensure' => 'present',
      'uid'    => '501'
    )
  end

  it { is_expected.to contain_file('/foo/bar').without_mode }

  it { is_expected.to contain_service('keystone_2').without(
    ['restart', 'status']
  )}

  it { is_expected.to contain_file('/path/file').with_content(/foobar/) }

  it do
    is_expected.to contain_file('/other/path/file')
      .with_content(/foobar/)
      .with_content(/bazbar/)
  end
}

YAML:

# Ensure a set of resources exist in the manifest, some with specific attributes
describe:
  name: my_module
  tests:
    contain_augeas:
      bleh: {}
    contain_class:
      foo: {}
    contain_foo__bar:
      baz: {}
    contain_package:
      mysql-server: present  # `with_ensure` is the default test when packages are given any scalar value
      httpd:
        only_with_ensure: latest
    contain_service:
      keystone:
        with:
          ensure: running
          enable: true
          hasstatus: true
          hasrestart: true
      keystone_2:
        without:
          - restart
          - status
    contain_user:
      luke:
        only_with:
          ensure: present
          uid: 501
    contain_file:
      /foo/bar:
        - without_mode
      /path/file:
        with_content: !ruby/regexp /foobar/
      /other/path/file:
        with_content:
          - !ruby/regexp /foobar/
          - !ruby/regexp /bazbar/
With stipulated resource relationships

Ruby:

describe "my_module" {
  # Ensure the file, foo, has specific relationships with other resources
  it { is_expected.to contain_file('foo').that_requires('File[bar]') }

  it { is_expected.to contain_file('foo').that_comes_before('File[baz]') }

  it { is_expected.to contain_file('foo').that_notifies('File[bim]') }

  it { is_expected.to contain_file('foo').that_subscribes_to('File[bom]') }


  # Ensure the file, bar, has specific relationships with many other resources
  it { is_expected.to contain_file('bar').that_requires(['File[fim]', 'File[fu]']) }

  it { is_expected.to contain_file('bar').that_comes_before(['File[fam]','File[far]']) }

  it { is_expected.to contain_file('bar').that_notifies(['File[fiz]', 'File[faz]']) }

  it { is_expected.to contain_file('bar').that_subscribes_to(['File[fuz]', 'File[fez]']) }

  # Other relationship example
  it { is_expected.to contain_notify('bar').that_comes_before('Notify[foo]') }

  it { is_expected.to contain_notify('foo').that_requires('Notify[bar]') }
}

YAML:

describe:
  name: my_module
  tests:
    contain_file:
      # Ensure the file, foo, has specific relationships with other resources
      foo:
        that_requires: File[bar]
        that_comes_before: File[baz]
        that_notifies: File[bim]
        that_subscribes_to: File[bom]

      # Ensure the file, bar, has specific relationships with many other resources
      bar:
        that_requires:
          - File[fim]
          - File[fu]
        that_comes_before:
          - File[fam]
          - File[far]
        that_notifies:
          - File[fiz]
          - File[faz]
        that_subscribes_to:
          - File[fuz]
          - File[fez]

    contain_notify:
      bar:
        that_comes_before: Notify[foo]
      foo:
        that_requires: Notify[bar]

The count matcher

Ruby:

# Ensure certain resource counts are true
describe "my_module" {
  it { is_expected.to have_resource_count(2) }

  it { is_expected.to have_class_count(2) }

  it { is_expected.to have_exec_resource_count(1) }

  it { is_expected.to have_logrotate__rule_resource_count(3) }
}

YAML:

# Ensure certain resource counts are true
describe:
  name: my_module
  tests:
    have_resource_count: 2
    have_class_count: 2
    have_exec_resource_count: 1
    have_logrotate__rule_resource_count: 3

Type alias matchers

Ruby:

describe 'MyModule::Shape' do
  it { is_expected.to allow_value('square') }
  it { is_expected.to allow_values('circle', 'triangle') }
  it { is_expected.not_to allow_value('blue') }
end

YAML:

describe:
  name: MyModule::Shape
  tests:
    be_valid_type:
      allow_value: square
      allow_values:
          - circle
          - triangle
    '!be_valid_type':  # The leading ! switches is_expected.to to is_expected.not_to
      allow_value: blue

Function matchers

Ruby:

describe 'my_function' {
  it { is_expected.to run.with_params('foo').and_return('bar') }
}

describe 'my_other_function' {
  it { is_expected.to run.with_params('foo', 'bar', ['baz']) }
}

YAML:

describe:
  'my_function':
    tests:
      run:
        with_params: foo
        and_return: bar
      run:
  'my_other_function':
    tests:
      run:
        with_params:
          - foo
          - bar
          - ['baz']
Negative tests and error matching

Ruby:

describe 'my_function' {
  it { is_expected.not_to run.with_params('a').and_raise_error(Puppet::ParseError) }
}

YAML:

describe:
  name: my_function
  tests:
    '!run':  # Negate a test with a ! prefix, but `'` or `"` demarcate the matcher name becaus a leading ! in YAML denotes a data-type specification.
      with_params: a
      and_raise_error: !ruby/exception Puppet::ParseError
    run:

Using before and after

Ruby:

describe 'my_function' {
  before(:each) { scope.expects(:lookupvar).with('some_variable').returns('some_value') }
  it { is_expected.to run.with_params('...').and_return('...') }
}

YAML:

YAML indirectly supports executable code in RSpec's before and after blocks. It is emulated by first writing a global scope function in your *_spec.rb file and then calling that function from the YAML file, as shown in these two snippets:

spec/function/my_function_spec.rb

require 'spec_helper'

def my_before
  scope.expects(:lookupvar).with('some_variable').returns('some_value')
end

parse_yaml_from_spec(__FILE__)

spec/function/my_function_spec.yaml

describe:
  name: my_function
  before: my_before
  tests:
    run:
      with_params: ...
      and_return: ...

Note that before: can specify an Array of global-scope functions to call, though it may be more intuitive to just define a global-scope function which calls all of the other functions you need to chain together. Or not. It depends on your logic.

This technique also helps define custom functions for your tests.

Hiera integration

Apart from ensuring that your metadata.json file is valid, you just don't need to do anything at all to enable module-level Hiera data integration; it's already built into rspec-puppet and it runs quite well without any additional configuration. If however, you have a valid use-case for customizing Hiera in order to test out-of-module data -- which should be a really hard sell since you should be testing your Module's code, not any out-of-module Hiera data -- the above documentation should be adequate to express such custom Hiera configuration, whether via let settings or custom functions run during begin. Should you find the existing support to be inadequate, feel free to open a qualifying Pull Request that adds whatever additional support you need.

Unsupported RSpec Puppet Features

This extension does not support the following features found in rspec-puppet:

  1. There is no way to create an example it that uses the expect() function instead of is_expected.
  2. With the highest available version of rspec-puppet at the time of this writing, there doesn't seem to be any way to use subject { exported_resources } because rspec-puppet throws an error message when you try, even when you follow its advice as to where to place the subject. You can still add subject to your YAML; it's just that rspec-puppet's exported_resources doesn't seem to be accessible from any subject today.
  3. In the Function matcher, lambdas are not known to be supported via YAML. So, the rspec-puppet example showing run.with_lambda has no obvious equivalent in rspec-puppet-yaml. A clever application of the %{eval:...} expander might help in some cases, but feel free to experiment and share back if you find a way to make this work.

Variants

This gem adds a new feature that isn't present in the gem it extends: variants. A variant in unit testing is a named repeat of its parent container with certain inputs and expectations tweaked. For example, imagine you have 10 base test examples and you want to test the limits of one input while simultaneously ensuring there are no unintended side-effects (so, you want to re-run the other 9 tests for each iteration of changes to the input-under-test). Without variants, you'd have to duplicate those other 9 test examples over and over. Variants eliminate all that dupliation in your test definitions, handling the repeating configuration for you.

Here's an example of a classic package.pp that enables customization of the single package's ensure attribute. The parent context defines two matcher tests, have_package_resource_count and contain_package. Each variant inherits both, then tweaks one aspect or another of the parent examples. Further, a separate context, package.pp negative tests does not inherit any tests from the package.pp context; they are peers rather than dependents.

describe:
  name: my-package
  context:
    'package.pp':
      tests:
        have_package_resource_count: 1
        contain_package:
          my-package: present
      variants:  # These will all inherit the parent's tests, tweaking as needed
        'uninstall':
          let:
            params:
              package_ensure: absent
          tests:
            contain_package:
              my-package: absent
        'pinned package version':
          let:
            params:
              package_ensure: '1.0.0.el7'
          tests:
            contain_package:
              my-package: '1.0.0.el7'

    'package.pp negative tests':
      variants:
        'bad package_ensure':
          let:
            params:
              package_ensure: 2.10
          tests:
            compile:
              and_raise_error: !ruby/regexp /parameter 'package_ensure' expects a String value, got Float/

Note that variants inherit everything from their parent describe or context except the following attributes:

  • variants
  • before
  • after
  • subject

Style Choices

Many of the elements can be expressed in multiple ways to achieve the same effect. For example, containers like describe, context, and variants can be listed as more-than-one using either of these forms:

# As implicity named Hash entities
describe:
  name: my_entity
  context:
    'context 1 name':
      attributes...
    'context 2 name':
      attributes...

# As explicitly named Hash entities
describe:
  name: my_entity
  context:
    - name: context 1 name
      attributes...
    - name: context 2 name
      attributes...

Keys can also be expressed as symbols, strings, or any combination of them:

# Keys as strings
describe:
  name: my_entity
  context:
    - name: context name
      attribute: value

# Keys as symbols
:describe:
  :name: my_entity
  :context:
    - :name: context name
      :attribute: value

Development

After checking out the repo, run bin/setup to install dependencies. Then, run bundle install && bundle exec rake spec to run the tests. Run yard to generate HTML documentation files (these generated files are ignored by git, so this is useful for local preview). You can also run bin/console for an interactive prompt that will allow you to experiment.

To install this gem onto your local machine, run bundle exec rake install. To release a new version, update the version number in version.rb, and then run bundle exec rake release, which will create a git tag for the version, push git commits and tags, and push the .gem file to rubygems.org.

API documentation is available at github.io.

Contributing

Bug reports and pull requests are welcome on GitHub at https://github.com/wwkimball/rspec-puppet-yaml. Contributors are expected to adhere to the Contributor Covenant.

License

The gem is available as open source under the terms of the MIT License.

Code of Conduct

Everyone interacting in the rspec-puppet-yaml project’s codebases, issue trackers, chat rooms and mailing lists is expected to follow the code of conduct.

About

Enable writing rspec-puppet tests in YAML rather than Ruby

Topics

Resources

License

Code of conduct

Stars

Watchers

Forks

Sponsor this project

 

Packages

No packages published