RFC: Allow full unicode range

build.sh

@@ -7,13 +7,13 @@ GITTAG=$(git tag --points-at HEAD)
 # Build the specification draft document
 echo "Building spec draft"
 mkdir -p public/draft
-spec-md --githubSource "https://github.com/graphql/graphql-spec/blame/main/" spec/GraphQL.md > public/draft/index.html
+spec-md --metadata spec/metadata.json --githubSource "https://github.com/graphql/graphql-spec/blame/main/" spec/GraphQL.md > public/draft/index.html
 
 # If this is a tagged commit, also build the release document
 if [ -n "$GITTAG" ]; then
   echo "Building spec release $GITTAG"
   mkdir -p "public/$GITTAG"
-  spec-md --githubSource "https://github.com/graphql/graphql-spec/blame/$GITTAG/" spec/GraphQL.md > "public/$GITTAG/index.html"
+  spec-md --metadata spec/metadata.json --githubSource "https://github.com/graphql/graphql-spec/blame/$GITTAG/" spec/GraphQL.md > "public/$GITTAG/index.html"
 fi
 
 # Create the index file

package.json

@@ -14,7 +14,7 @@
   },
   "scripts": {
     "test": "npm run test:build && npm run test:spellcheck",
-    "test:build": "spec-md spec/GraphQL.md > /dev/null",
+    "test:build": "spec-md --metadata spec/metadata.json spec/GraphQL.md > /dev/null",
     "test:spellcheck": "cspell 'spec/**/*.md' README.md",
     "format": "prettier --write '**/*.{md,yml,yaml,json}'",
     "format:check": "prettier --check '**/*.{md,yml,yaml,json}'",

spec/Appendix B -- Grammar Summary.md

@@ -2,12 +2,7 @@
 
 ## Source Text
 
-SourceCharacter ::
-
-- "U+0009"
-- "U+000A"
-- "U+000D"
-- "U+0020–U+FFFF"
+SourceCharacter :: "Any Unicode scalar value"
 
 ## Ignored Tokens
 
@@ -113,7 +108,16 @@ StringCharacter ::
 - `\u` EscapedUnicode
 - `\` EscapedCharacter
 
-EscapedUnicode :: /[0-9A-Fa-f]{4}/
+EscapedUnicode ::
+
+- `{` HexDigit+ `}`
+- HexDigit HexDigit HexDigit HexDigit
+
+HexDigit :: one of
+
+- `0` `1` `2` `3` `4` `5` `6` `7` `8` `9`
+- `A` `B` `C` `D` `E` `F`
+- `a` `b` `c` `d` `e` `f`
 
 EscapedCharacter :: one of `"` `\` `/` `b` `f` `n` `r` `t`
 

spec/Section 2 -- Language.md

@@ -45,32 +45,22 @@ match, however some lookahead restrictions include additional constraints.
 
 ## Source Text
 
-SourceCharacter ::
+SourceCharacter :: "Any Unicode scalar value"
 
-- "U+0009"
-- "U+000A"
-- "U+000D"
-- "U+0020–U+FFFF"
+GraphQL documents are interpreted from a source text, which is a sequence of
+{SourceCharacter}, each {SourceCharacter} being a _Unicode scalar value_ which
+may be any Unicode code point from U+0000 to U+D7FF or U+E000 to U+10FFFF
+(informally referred to as _"characters"_ through most of this specification).
 
-GraphQL documents are expressed as a sequence of
-[Unicode](https://unicode.org/standard/standard.html) code points (informally
-referred to as _"characters"_ through most of this specification). However, with
-few exceptions, most of GraphQL is expressed only in the original non-control
-ASCII range so as to be as widely compatible with as many existing tools,
-languages, and serialization formats as possible and avoid display issues in
-text editors and source control.
+A GraphQL document may be expressed only in the ASCII range to be as widely
+compatible with as many existing tools, languages, and serialization formats as
+possible and avoid display issues in text editors and source control. Non-ASCII
+Unicode scalar values may appear within {StringValue} and {Comment}.
 
-Note: Non-ASCII Unicode characters may appear freely within {StringValue} and
-{Comment} portions of GraphQL.
-
-### Unicode
-
-UnicodeBOM :: "Byte Order Mark (U+FEFF)"
-
-The "Byte Order Mark" is a special Unicode character which may appear at the
-beginning of a file containing Unicode which programs may use to determine the
-fact that the text stream is Unicode, what endianness the text stream is in, and
-which of several Unicode encodings to interpret.
+Note: An implementation which uses _UTF-16_ to represent GraphQL documents in
+memory (for example, JavaScript or Java) may encounter a _surrogate pair_. This
+encodes one _supplementary code point_ and is a single valid source character,
+however an unpaired _surrogate code point_ is not a valid source character.
 
 ### White Space
 
@@ -115,10 +105,9 @@ CommentChar :: SourceCharacter but not LineTerminator
 GraphQL source documents may contain single-line comments, starting with the
 {`#`} marker.
 
-A comment can contain any Unicode code point in {SourceCharacter} except
-{LineTerminator} so a comment always consists of all code points starting with
-the {`#`} character up to but not including the {LineTerminator} (or end of the
-source).
+A comment may contain any {SourceCharacter} except {LineTerminator} so a comment
+always consists of all {SourceCharacter} starting with the {`#`} character up to
+but not including the {LineTerminator} (or end of the source).
 
 Comments are {Ignored} like white space and may appear after any token, or
 before a {LineTerminator}, and have no significance to the semantic meaning of a
@@ -175,6 +164,16 @@ significant way, for example a {StringValue} may contain white space characters.
 No {Ignored} may appear _within_ a {Token}, for example no white space
 characters are permitted between the characters defining a {FloatValue}.
 
+**Byte order mark**
+
+UnicodeBOM :: "Byte Order Mark (U+FEFF)"
+
+The _Byte Order Mark_ is a special Unicode code point which may appear at the
+beginning of a file which programs may use to determine the fact that the text
+stream is Unicode, and what specific encoding has been used. As files are often
+concatenated, a _Byte Order Mark_ may appear before or after any lexical token
+and is {Ignored}.
+
 ### Punctuators
 
 Punctuator :: one of ! $ & ( ) ... : = @ [ ] { | }
@@ -812,7 +811,16 @@ StringCharacter ::
 - `\u` EscapedUnicode
 - `\` EscapedCharacter
 
-EscapedUnicode :: /[0-9A-Fa-f]{4}/
+EscapedUnicode ::
+
+- `{` HexDigit+ `}`
+- HexDigit HexDigit HexDigit HexDigit
+
+HexDigit :: one of
+
+- `0` `1` `2` `3` `4` `5` `6` `7` `8` `9`
+- `A` `B` `C` `D` `E` `F`
+- `a` `b` `c` `d` `e` `f`
 
 EscapedCharacter :: one of `"` `\` `/` `b` `f` `n` `r` `t`
 
@@ -821,19 +829,57 @@ BlockStringCharacter ::
 - SourceCharacter but not `"""` or `\"""`
 - `\"""`
 
-Strings are sequences of characters wrapped in quotation marks (U+0022). (ex.
-{`"Hello World"`}). White space and other otherwise-ignored characters are
-significant within a string value.
+A {StringValue} is evaluated to a _Unicode text_ value, a sequence of _Unicode
+scalar value_, by interpreting all escape sequences using the static semantics
+defined below. White space and other characters ignored between lexical tokens
+are significant within a string value.
 
 The empty string {`""`} must not be followed by another {`"`} otherwise it would
 be interpreted as the beginning of a block string. As an example, the source
 {`""""""`} can only be interpreted as a single empty block string and not three
 empty strings.
 
-Non-ASCII Unicode characters are allowed within single-quoted strings. Since
-{SourceCharacter} must not contain some ASCII control characters, escape
-sequences must be used to represent these characters. The {`\`}, {`"`}
-characters also must be escaped. All other escape sequences are optional.
+**Escape Sequences**
+
+In a single-quoted {StringValue}, any _Unicode scalar value_ may be expressed
+using an escape sequence. GraphQL strings allow both C-style escape sequences
+(for example `\n`) and two forms of Unicode escape sequences: one with a
+fixed-width of 4 hexadecimal digits (for example `\u000A`) and one with a
+variable-width most useful for representing a _supplementary character_ such as
+an Emoji (for example `\u{1F4A9}`).
+
+The hexadecimal number encoded by a Unicode escape sequence must describe a
+_Unicode scalar value_, otherwise must result in a parse error. For example both
+sources `"\uDEAD"` and `"\u{110000}"` should not be considered valid
+{StringValue}.
+
+Escape sequences are only meaningful within a single-quoted string. Within a
+block string, they are simply that sequence of characters (for example
+`"""\n"""` represents the _Unicode text_ [U+005C, U+006E]). Within a comment an
+escape sequence is not a significant sequence of characters. They may not appear
+elsewhere in a GraphQL document.
+
+Since {StringCharacter} must not contain some code points directly (for example,
+a {LineTerminator}), escape sequences must be used to represent them. All other
+escape sequences are optional and unescaped non-ASCII Unicode characters are
+allowed within strings. If using GraphQL within a system which only supports
+ASCII, then escape sequences may be used to represent all Unicode characters
+outside of the ASCII range.
+
+For legacy reasons, a _supplementary character_ may be escaped by two
+fixed-width unicode escape sequences forming a _surrogate pair_. For example the
+input `"\uD83D\uDCA9"` is a valid {StringValue} which represents the same
+_Unicode text_ as `"\u{1F4A9}"`. While this legacy form is allowed, it should be
+avoided as a variable-width unicode escape sequence is a clearer way to encode
+such code points.
+
+When producing a {StringValue}, implementations should use escape sequences to
+represent non-printable control characters (U+0000 to U+001F and U+007F to
+U+009F). Other escape sequences are not necessary, however an implementation may
+use escape sequences to represent any other range of code points (for example,
+when producing ASCII-only output). If an implementation chooses to escape a
+_supplementary character_, it should only use a variable-width unicode escape
+sequence.
 
 **Block Strings**
 
@@ -889,51 +935,84 @@ Note: If non-printable ASCII characters are needed in a string value, a standard
 quoted string with appropriate escape sequences must be used instead of a block
 string.
 
-**Semantics**
+**Static Semantics**
+
+:: A {StringValue} describes a _Unicode text_ value, which is a sequence of
+_Unicode scalar value_.
+
+These semantics describe how to apply the {StringValue} grammar to a source text
+to evaluate a _Unicode text_. Errors encountered during this evaluation are
+considered a failure to apply the {StringValue} grammar to a source and must
+result in a parsing error.
 
 StringValue :: `""`
 
 - Return an empty sequence.
 
 StringValue :: `"` StringCharacter+ `"`
 
-- Return the sequence of all {StringCharacter} code points.
+- Return the _Unicode text_ by concatenating the evaluation of all
+  {StringCharacter}.
 
 StringCharacter :: SourceCharacter but not `"` or `\` or LineTerminator
 
-- Return the code point {SourceCharacter}.
+- Return the _Unicode scalar value_ {SourceCharacter}.
 
 StringCharacter :: `\u` EscapedUnicode
 
-- Let {value} be the 16-bit hexadecimal value represented by the sequence of
-  hexadecimal digits within {EscapedUnicode}.
-- Return the code point {value}.
+- Let {value} be the hexadecimal value represented by the sequence of {HexDigit}
+  within {EscapedUnicode}.
+- Assert {value} is a within the _Unicode scalar value_ range (>= 0x0000 and <=
+  0xD7FF or >= 0xE000 and <= 0x10FFFF).
+- Return the _Unicode scalar value_ {value}.
+
+StringCharacter :: `\u` HexDigit HexDigit HexDigit HexDigit `\u` HexDigit
+HexDigit HexDigit HexDigit
+
+- Let {leadingValue} be the hexadecimal value represented by the first sequence
+  of {HexDigit}.
+- Let {trailingValue} be the hexadecimal value represented by the second
+  sequence of {HexDigit}.
+- If {leadingValue} is >= 0xD800 and <= 0xDBFF (a _Leading Surrogate_):
+  - Assert {trailingValue} is >= 0xDC00 and <= 0xDFFF (a _Trailing Surrogate_).
+  - Return ({leadingValue} - 0xD800) × 0x400 + ({trailingValue} - 0xDC00) +
+    0x10000.
+- Otherwise:
+  - Assert {leadingValue} is within the _Unicode scalar value_ range.
+  - Assert {trailingValue} is within the _Unicode scalar value_ range.
+  - Return the sequence of the _Unicode scalar value_ {leadingValue} followed by
+    the _Unicode scalar value_ {trailingValue}.
+
+Note: If both escape sequences encode a _Unicode scalar value_, then this
+semantic is identical to applying the prior semantic on each fixed-width escape
+sequence. A variable-width escape sequence must only encode a _Unicode scalar
+value_.
 
 StringCharacter :: `\` EscapedCharacter
 
-- Return the code point represented by {EscapedCharacter} according to the table
-  below.
+- Return the _Unicode scalar value_ represented by {EscapedCharacter} according
+  to the table below.
 
-| Escaped Character | Code Point | Character Name               |
-| ----------------- | ---------- | ---------------------------- |
-| {`"`}             | U+0022     | double quote                 |
-| {`\`}             | U+005C     | reverse solidus (back slash) |
-| {`/`}             | U+002F     | solidus (forward slash)      |
-| {`b`}             | U+0008     | backspace                    |
-| {`f`}             | U+000C     | form feed                    |
-| {`n`}             | U+000A     | line feed (new line)         |
-| {`r`}             | U+000D     | carriage return              |
-| {`t`}             | U+0009     | horizontal tab               |
+| Escaped Character | Scalar Value | Character Name               |
+| ----------------- | ------------ | ---------------------------- |
+| {`"`}             | U+0022       | double quote                 |
+| {`\`}             | U+005C       | reverse solidus (back slash) |
+| {`/`}             | U+002F       | solidus (forward slash)      |
+| {`b`}             | U+0008       | backspace                    |
+| {`f`}             | U+000C       | form feed                    |
+| {`n`}             | U+000A       | line feed (new line)         |
+| {`r`}             | U+000D       | carriage return              |
+| {`t`}             | U+0009       | horizontal tab               |
 
 StringValue :: `"""` BlockStringCharacter\* `"""`
 
-- Let {rawValue} be the Unicode character sequence of all {BlockStringCharacter}
-  Unicode character values (which may be an empty sequence).
+- Let {rawValue} be the _Unicode text_ by concatenating the evaluation of all
+  {BlockStringCharacter} (which may be an empty sequence).
 - Return the result of {BlockStringValue(rawValue)}.
 
 BlockStringCharacter :: SourceCharacter but not `"""` or `\"""`
 
-- Return the character value of {SourceCharacter}.
+- Return the _Unicode scalar value_ {SourceCharacter}.
 
 BlockStringCharacter :: `\"""`
 

spec/metadata.json

@@ -0,0 +1,15 @@
+{
+  "biblio": {
+    "https://www.unicode.org/glossary": {
+      "byte-order-mark": "#byte_order_mark",
+      "leading-surrogate": "#leading_surrogate",
+      "trailing-surrogate": "#trailing_surrogate",
+      "supplementary-character": "#supplementary_character",
+      "supplementary-code-point": "#supplementary_code_point",
+      "surrogate-code-point": "#surrogate_code_point",
+      "surrogate-pair": "#surrogate_pair",
+      "unicode-scalar-value": "#unicode_scalar_value",
+      "utf-16": "#UTF_16"
+    }
+  }
+}