Resource merge semantics make upgrades problematic

[pkwarren]

Description

We've encountered issues upon a recent upgrade to OTEL v1.1.0 (which upgraded to semconv v1.7.0) and existing code or contrib code which still used semconv v1.4.0. See open-telemetry/opentelemetry-go-contrib#1384 for an example.

The spec (https://github.com/open-telemetry/opentelemetry-specification/blob/bad49c714a62da5493f2d1d9bafd7ebe8c8ce7eb/specification/resource/sdk.md#merge) seems a bit contradictory in how this should be handled:

The interface MUST provide a way for an old resource and an updating resource to be merged into a new resource.

while also mentioning the merge algorithm (which is implemented to the spec in opentelemetry-go) as:

Else this is a merging error (this is the case when the Schema URL of the old and updating resources are not empty and are different).

From a consumer perspective, there is no real way to determine if all of the resources are compatible prior to calling resource.New(...), and thus we're failing to create a resource detector.

Instead of the current algorithm, it feels like if the two resource schemas being merged are compatible (same major version), the merge should be able to proceed. Otherwise, we'll need to coordinate an upgrade of every telemetry package together to ensure we're on a consistent version of semconv.

Possible algorithms:

• Create merged resource using the oldest version of semconv. This might introduce new attributes which are introduced with later specs, however it should still be compatible with an older version.
• Create merged resource using the newest version of semconv (perhaps with migration of certain well known attributes - i.e. rpc.jsonrpc.method -> rpc.method).
• Create unversioned resource if the versions don't match.

Environment

• OS: Linux/Mac
• Architecture: x86_64
• Go Version: 1.16+
• opentelemetry-go version: v1.1.0

Steps To Reproduce

1. Configure a resource with a combination of resource detectors which use different versions of semconv package (i.e. v1.4.0 + v1.7.0).
2. resource.New fails because two different semconv versions are in use:

   opentelemetry-go/sdk/resource/resource.go

   Lines 190 to 192 in 7ce58f3

   	} else {
   	return Empty(), errMergeConflictSchemaURL
   	}

Expected behavior

Resource detector should be able to be initialized.

[Aneurysm9]

This is a problem we're in the process of addressing. The semantic conventions now include a schema that describes changes from version to version in a way that will enable migrating a resource from one version to the next. We recently landed #2267 which gives us the ability to parse those schema definitions. The next step is to implement the transformations required and then to update the Resource.Merge() method to migrate resources with differing schemas to a common schema.

[seanschade]

@Aneurysm9 I can see where renaming attributes could be helpful in some cases, but also could break dashboards and alerts in an observability platform.

Will there be an option to include both the old and new attributes on a span, metric, or log?
Are there plans for the collector to use the same merge logic? I could see having a processor that transforms attributes as well.

We try and keep our internal libraries in sync with otel. My concern with semconv is that there could be subtle, breaking changes in the telemetry data that affects our observability.

[Aneurysm9]

There are plans for the collector to have a processor with the same logic and the ability to normalize all incoming attributes to a given schema version.

[MrAlias]

Closing as this is now addressed with the OTel schema.

[terinjokes]

@MrAlias How was this resolved? I got bit by this today.

[bboreham]

In case it helps someone else, I had to track down this version number, and copy it into my program so it matched:

opentelemetry-go/sdk/resource/process.go

Line 25 in 60f7d42

semconv "go.opentelemetry.io/otel/semconv/v1.17.0"

(notwithstanding the release notes telling me v1.18.0 is part of the 1.14 release)

[jufemaiz]

In case it helps someone else, I had to track down this version number, and copy it into my program so it matched:

opentelemetry-go/sdk/resource/process.go

Line 25 in 60f7d42

semconv "go.opentelemetry.io/otel/semconv/v1.17.0"

(notwithstanding the release notes telling me v1.18.0 is part of the 1.14 release)

This looks like a bug to me – if the schema is being returned as v1.17.0 when v1.18.0 had been released.

[jufemaiz]

Closing as this is now addressed with the OTel schema.

Can you identify how that is the case?

https://github.com/open-telemetry/opentelemetry-go/blob/main/sdk/resource/resource.go#L150-L193

This explicitly requires identical schemas between two resources.

[jufemaiz]

This is a problem we're in the process of addressing. The semantic conventions now include a schema that describes changes from version to version in a way that will enable migrating a resource from one version to the next. We recently landed #2267 which gives us the ability to parse those schema definitions. The next step is to implement the transformations required and then to update the Resource.Merge() method to migrate resources with differing schemas to a common schema.

Is there an update here? Is there anything I could look to contribute?

[jufemaiz]

@Aneurysm9 do you have further details or should I open something separately up?

[Aneurysm9]

I'm not sure there is anything we can do in the Go implementation at this time to improve the situation. The specification does not detail how to perform resource merging with multiple schema URLs involved, instead it defines this as an error and states that the resulting resource is undefined. There is a proposal to separate semantic conventions from the specification, which may result in a new schema family and versions, which I think would only further complicate this situation.

While I think it might be argued that it would be spec compliant to return an error and a merged resource with the schema URL removed, doing so would likely condition users to ignore the error and result in surprising behavior when the implementation changes and/or different behavior is specified.

[jufemaiz]

Cheers @Aneurysm9. Yep, agreed that the spec does not detail how to manage, however, as highlighted here (and elsewhere through open-telemetry/opentelemetry-go-contrib#3657 with a response @ #3944) opentelemetry-go hard codes schema URLs in a number of locations, as opposed to having either (a) passing it in as a function argument (optional or not); or (b) allowing for a "schema migration" to a given target. This is also not something that is specified in the otel spec itself (afaik, happy to be told otherwise). As such, that hard coding, and its entwinement with the release cycle and dependency management (security issues especially) means that there's some critical issues wrt the "brittleness" of this package (as I've noted in the linked issue raised in otel-go-contrib). This is especially the case if the diff in schema from one to the next is minor, and there is a growing use of third party services that necessarily reference schema definitions. A better "best practice" IMHO is needed across the go library to allow for keeping the maintenance of the package separate from the availability and provision of different schemas.

I'm keen to get more involved in this and understand that the wee hours of the Thursday morning (AEST) is the meeting time so I can likely jump on from next week onwards.

[Aneurysm9]

Telemetry schema and their description of changes from one version to the next are documented in the specification. The gap lies in the resource specification including a requirement for schema URL support and stating that merging resources with different schema URLs is an error without including a requirement that schema translation be applied or that there be a mechanism for indicating that schema translation should be applied.

There was significant discussion of this topic at the maintainers' meeting today and I expect there will be more discussion of this issue at the specification SIG meeting tomorrow. I'm sorry if my earlier comment appeared to imply that I did not care about this issue or that we were not intending to do anything about it. We certainly do intend to ensure that resources with associated telemetry schema can be used easily and safely. I think that the proposal @MrAlias has made in #3944 is good, and the implementation is the logical conclusion of work started almost two years ago when we began introducing telemetry schema. However, I think it does not go far enough and the spec should instead direct that telemetry schema migration SHOULD be used to align attributes on resources to be merged, either implicitly at the newer of the two versions or explicitly at the version provided by the user. We do, however, need to be careful to ensure that we do not introduce changes to our stable SDK that are incompatible with the specification or that get ahead of specification language under consideration that may change before it is stabilized.

[MrAlias]

Here's a new repo I created to handle schema translations: https://github.com/MrAlias/otel-schema-utils

Only thing supported currently is resource translations.

[maximkosov]

We hit this issue multiple times already because of routine package updates and without any changes from our side.
The main problem is that often the issue can only be noticed in production, and it feels like the impact is not justified by the severity of the problem we're trying to solve using schema versions.
I mean, should we really care if name of some field (which may never be really looked at) was changed and now we temporarily have duplicated field?
Especially considering, that often resources define mutually exclusive set of fields.

While I can imagine the cases where it is important to enforce compatible schemas, maybe we can just introduce a flag to ignore schema version incompatibility?

[joshcarp]

@MrAlias is there any desire to fix this issue?
This is probably one of the most common problems that comes up with routine OpenTelemtry maintenance and this issue has been open for almost two years now

[jufemaiz]

maybe we can just introduce a flag to ignore schema version incompatibility?

It would be not compliant with the specification.

I created #4484 that should help to mitigate the issue.

Note for those following here: #4484 (comment)

SIG meeting: This API will not help a lot. Closing.

@MrAlias Will try to revive the translation layer.

[tonglil]

Something I haven't seen in the discussion currently is that semconv doesn't seem to follow semver. The way these are versioned is that not all versions are compatible, even across minor/patch releases :/

For example, I need to upgrade my code from v1.7.0 to v1.21.0, but both are under v1? Forcing me to do this to continue having working code seems like a major version bump?

[pellared]

Something I haven't seen in the discussion currently is that semconv doesn't seem to follow semver. The way these are versioned is that not all versions are compatible, even across minor/patch releases :/

For example, I need to upgrade my code from v1.7.0 to v1.21.0, but both are under v1? Forcing me to do this to continue having working code seems like a major version bump?

@tonglil, semantic conventions versioning policy is defined here: https://opentelemetry.io/docs/specs/otel/versioning-and-stability/#semantic-conventions-stability. Take notice that v1.7.0 and v1.21.0 are different packages. This not "usual" SemVer.

[tonglil]

@pellared sorry to follow up but I'm looking for clarity on a couple of things.

1. as casual consumers of otel, it's a bit unreasonable to expect them to "know" that it follows a different meaning of semver.

2. I understand they are different packages, but how come I have to change packages if I haven't changed my code other than a dependency? If my app uses v1.7.0 to implement a schemaless detector (to set some attributes from the environment), shouldn't it continue working even if the cloud provider detector (detecting other attributes) was upgraded to v1.21.0?

3. It feels like resource.New should be versioned with semconv if it's reliant on all detectors' semconv versions matching.

[jufemaiz]

Something I haven't seen in the discussion currently is that semconv doesn't seem to follow semver. The way these are versioned is that not all versions are compatible, even across minor/patch releases :/
For example, I need to upgrade my code from v1.7.0 to v1.21.0, but both are under v1? Forcing me to do this to continue having working code seems like a major version bump?

@tonglil, semantic conventions versioning policy is defined here: https://opentelemetry.io/docs/specs/otel/versioning-and-stability/#semantic-conventions-stability. Take notice that v1.7.0 and v1.21.0 are different packages. This not "usual" SemVer.

Excepting that the current strategy adopted in the related opentelemetry-go-contrib packages fails to ensure that each detector/instrumentation is separately implemented and available for each semconv – instead it afixes only a single semconv per release.

open-telemetry/opentelemetry-go-contrib#3657 (comment)

What's more challenging still is that within that single package for a given release, there are currently three different semconvs in use – gcp even has differing semconv within the same 'namespace'.

While it is not necessarily one to discuss here, the problems with interoperability due to brittle design decisions – particularly with distributed systems – is rather concerning to me as a consumer of the standard, especially as it is currently adopted in Go.

Right now I'm seeing version bumps due to security related issues for the contrib packages. The problem is that they don't abide by the compatibility contract of golang modules. Arguably the semconv strategy and contract of otel conflicts with golang's own module contract to the extent that IMHO each semconv alteration should see a similar vN release of a module in the opentelemetry-go-contrib space. That is, each otel semconv has its own package for each detector/instrumentation/instrgen etc module.

[wafer-bw]

At the very least the error message from func Merge(a, b *Resource) (*Resource, error) "cannot merge resource due to conflicting Schema URL" should be updated to include the SchemaURL() values for both a & b.

Edit1: Why is errMergeConflictSchemaURL not an exported error so we can handle this case via errors.Is?

Edit2: Forgive me if this is naive but a and b are both structs of the same type, why is the responsibility of the underlying API schema being pushed to the caller? It feels like a responsibility the resource or other otel packages would be better fit to manage.